display TOYOTA TUNDRA 2020 Accessories, Audio & Navigation (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2020, Model line: TUNDRA, Model: TOYOTA TUNDRA 2020Pages: 262, PDF Size: 10.74 MB
Page 114 of 262

1163-5. Tips for operating the navigation system
version.
After replacing a tire:  P.108
●This navigation system uses tire 
turning data and is designed to 
work with factory- specified tires 
for the vehicle. Ins talling tires that 
are larger or smaller than the orig-
inally equipped  diameter may 
cause inaccurate display of the 
current position. The tire pressure 
also affects the diameter of the 
tires, so make sure that the tire 
pressure of all 4 tires is correct.
1 Select   on the map 
screen. ( P. 7 2 )
2 Select “Map Data”.
3 Check that the map data 
screen is displayed.
Map version
Select to display map cover-
age areas.
Select to display legal infor-
mation.
Select to update map.
●For map data updates, contact 
your Toyota dealer.
*: This function is not made avail-
Map database version 
and covered area
Coverage areas and legal 
information can be dis-
played and map data can be 
updated.
Map information
Temporary updates of the 
map*
A
B
C
D 
Page 115 of 262

1173-5. Tips for operating the navigation system
3
Navigation system
able in some countries or areas.
If the map data has been pro-
vided from the Cloud for any of 
the following areas and the map 
data in the navigation system is 
older than what has been pro-
vided, the displayed map will be 
updated temporarily:
• Areas around the area dis-played on the map screen 
(example: areas around cur-
rent position)
• Areas around destinations
• Areas along the set route
●The updated data will temporarily 
be saved in the  navigation sys-
tem.
●If temporary updat e data exceeds 
the available memory in the tem-
porary map cache, the oldest data 
will be deleted.
●The temporary map data will dis-
appear when the expiration date 
has passed. 
Page 120 of 262

1224-1. Basic operation
1Display the audio source 
selection screen. ( P.121)
2 Select “Reorder”.
3 Select the desired audio 
source then   or   to reor-
der.
4 Select “OK”.
1 Open the cover and connect 
a device.
 Turn on the power of the 
device if it is not turned on.
●If a USB hub is plugged-in, two 
devices can be connected at a 
time.
●Even if a USB hub is used to con-
nect more than two USB devices, 
only the first two connected 
devices will be recognized.
●If a USB hub that has more than 
two ports is connected to the USB 
port, devices connected to the 
USB hub may not  charge or be 
inoperable, as the supply of cur-
rent may be insufficient.
1 Display the audio control 
screen. ( P.121)
2 Select “Sound”.
3 Select the desired item to be 
set.
Select to set the tre-
ble/mid/bass. ( P.122)
Select to set the fader/bal-
ance. ( P.123)
Select to set the automatic 
sound levelizer. ( P.123)
■Treble/Mid/Bass
How good an audio program 
sounds is largely determined by 
the mix of the treble, mid and 
bass levels. In fact, different 
kinds of music and vocal pro-
grams usually sound better with 
different mixes of treble, mid 
and bass.
1 Select “Treble/Mid/Bass”.
Reordering the audio 
source
USB port
Sound settings
A
B
C 
Page 122 of 262

1244-1. Basic operation
4Select “Common”.
5 Select “Screen Format”.
6 Select the desired item to be 
adjusted.
Select to display a 4:3 
screen, with either side in 
black.
Select to enlarge the image 
horizontally and vertically to 
full screen.
Select to enlarge the image 
by the same ratio horizontally 
and vertically.
■Contrast and brightness 
adjustment
The contrast and brightness of 
the screen can be adjusted.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Audio”.
4 Select “Common”.
5 Select “Display”.
6 Select the desired item to be 
adjusted.
 “Contrast”
“+”: Select to strengthen the con-
trast of the screen. “-”: Select to weaken the contrast of 
the screen.
“Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
●Depending on the audio source, 
some functions m ay not be avail-
able.
1 Press this switch to operate 
the voice command system.
 The voice command system 
and its list of commands can 
be operated. ( P.158)
A
B
C
Voice command system 
Page 123 of 262

1254-2. Radio operation
4
Audio/visual system
4-2.Radio operation
*: This function is not made avail-able in some countries or areas.
The radio operation screen can 
be reached by the following 
methods:
 P. 1 2 1
Select to display the audio 
source selection screen.
Select to display the preset 
stations screen. ( P.126)
Select to display the cache 
radio operation screen.
* 
( P.126)
Select to display a list of 
receivable stations. ( P.127)
Select to display the radio 
options screen. ( P.127)
Select to display the sound 
setting screen. ( P.122)
Select to tune to preset sta- tions/channels. (
P.126)
Displays items on the chan-
nels registered to smart 
favorites
* (  P.131, 146)
Displays the artist info and 
song title or album
Select to change the dis-
played information.
Displays messages when 
available
*
Displays cover art, station 
logo, etc.
*
Displays information about 
the song/track currently 
being played
*
Select to display HD) multi-
cast channels available.
* 
( P.129)
*: This function is not made avail-
able in some countries or areas.
Turn to step up/down fre-
quencies/channels.
Turn to move up/down the 
station list. Also, the knob 
can be used to enter selec-
AM/FM/SiriusXM® Sat-
ellite Radio*
Overview
Control screen
A
B
C
D
E
F
G
 &