instrument cluster TOYOTA VENZA 2015 Owners Manual (in English)

1
2
3
4
5
6
7
3
VENZA_OM_OM73023U_(U)
2-1. Driving proceduresDriving the vehicle............... 162
Engine (ignition) switch (vehicles with smart
key system)....................... 173
Engine (ignition) switch (vehicles without smart
key system)....................... 177
Automatic transmission ....... 180
Turn signal lever ................. 185
Parking brake ...................... 186
Horn .................................... 187
2-2. Instrument cluster Gauges and meters ............ 188
Indicators and warning lights ................................. 191
Multi-information display (TFT type) ......................... 194
Multi-information display (LCD type) ........................ 206
Fuel consumption information ........................ 210 2-3. Operating the lights
and wipers
Headlight switch ................. 212
Automatic High Beam......... 216
Fog light switch................... 223
Windshield wipers and washer....................... 225
Rear window wiper and washer....................... 229
2-4. Using other driving systems Cruise control ..................... 231
Intuitive parking assist ........ 235
Rear view monitor system .............................. 243
Driving assist systems ........ 256
Hill-start assist control ........ 262
2-5. Driving information Utility vehicle precautions....................... 264
Cargo and luggage ............. 269
Vehicle load limits............... 274
Winter driving tips ............... 276
Trailer towing ...................... 281
Dinghy towing ..................... 302
2When driving

When driving2
161
VENZA_OM_OM73023U_(U)
2-1. Driving proceduresDriving the vehicle............ 162
Engine (ignition) switch (vehicles with smart
key system).................... 173
Engine (ignition) switch (vehicles without smart
key system).................... 177
Automatic transmission................... 180
Turn signal lever .............. 185
Parking brake ................... 186
Horn ................................. 187
2-2. Instrument cluster Gauges and meters ......... 188
Indicators and warning lights .............................. 191
Multi-information display (TFT type) ...................... 194
Multi-information display (LCD type) ..................... 206
Fuel consumption information ..................... 210 2-3. Operating the lights
and wipers
Headlight switch ............... 212
Automatic High Beam ...... 216
Fog light switch ................ 223
Windshield wipers and washer .................... 225
Rear window wiper and washer .................... 229
2-4. Using other driving systems Cruise control ................... 231
Intuitive parking assist...... 235
Rear view monitor system ........................... 243
Driving assist systems ..... 256
Hill-start assist control ...... 262
2-5. Driving information Utility vehicle precautions .................... 264
Cargo and luggage .......... 269
Vehicle load limits ............ 274
Winter driving tips ............ 276
Trailer towing ................... 281
Dinghy towing .................. 302

188
VENZA_OM_OM73023U_(U)
2-2. Instrument cluster
Gauges and meters
Vehicles with smart key system
The following gauges, meters and display illuminate when the
“ENGINE START STOP” switch is in IGNITION ON mode.
Vehicles without smart key system
The following gauges, meters and displays illuminate when the
engine switch is in the “ON” position.
Tachometer
Displays the engine speed in revolutions per minute.
Speedometer
Displays the vehicle speed.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Engine coolant temperature gauge
Displays the engine coolant temperature.

189
2-2. Instrument cluster
2
When driving
VENZA_OM_OM73023U_(U)
Instrument panel light control
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter
Odometer/trip meter and trip meter reset button
Switches between odometer and trip meter displays. Pushing and hold-
ing the button will reset the trip meter when the trip meter is being dis-
played.
Odometer and trip meter
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to record and
display different distances independently.

190 2-2. Instrument cluster
VENZA_OM_OM73023U_(U)
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the engine coolant temperature gauge is
in the red zone (“H”). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. ( P. 603)

191
2-2. Instrument cluster
2
When driving
VENZA_OM_OM73023U_(U)
Indicators and warning lights
The indicator and warning lights on the instrument cluster and cen-
ter panel inform the driver of the status of the vehicle’s various sys-
tems.
For the purpose of explanation, the following illustration displays all
indicators and warn ing lights illuminated.
Instrument cluster
Center display

192 2-2. Instrument cluster
VENZA_OM_OM73023U_(U)
■Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(P. 185)Cruise control “SET”
indicator (P. 231)
Headlight high beam
indicator ( P. 213)Slip indicator ( P. 257)
(U.S.A.)
Headlight indicator
(P. 212)VSC OFF indicator
(P. 258)
(Canada)
Tail light indicator
(P. 212) TRAC OFF indicator
(P. 258)
(if equipped)
Automatic High Beam
indicator ( P. 216)“AIR BAG ON/OFF”
indicator (P. 134)
Fog light indicator
(P. 223)
Shift position and shift
range indicators
(P. 180)Security indicator
(P. 109, 112)
Cruise control indicator
(P. 231)
*1, 2
*1
*1

193
2-2. Instrument cluster
2
When driving
VENZA_OM_OM73023U_(U)
CAUTION
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and the SRS airbag warning
lights not come on when you start the engine, this could mean that these
systems are not available to help protect you in an accident, which could
result in death or serious injury. Have the vehicle inspected by your Toyota
dealer immediately if this occurs.
■ Warning lights
Warning lights inform the driver of malfunctions in the indicated
vehicle’s systems. ( P. 564)
*1: These lights turn on when the “ENGINE START STOP” switch is
turned to IGNITION ON mode (vehicles with smart key system) or the
engine switch is turned to the “ON” position (vehicles without smart
key system) to indicate that a system check is being performed. They
will turn off after the engine is started, or after a few seconds. There
may be a malfunction in a system if the lights do not come on, or if the
lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: The indicator flashes to indicate that the system is operating.
*3: The indicator comes on to indicate a malfunction.
*4: The indicator flashes to indicate a malfunction.
(if equipped)(U.S.A.)(Canada)(if equipped)(if equipped)
(U.S.A.)(Canada)(U.S.A.)
(if equipped)(if equipped)
*1*1*1*1*1*1*4
*1*1*1*1*1
*1*1*1*1, 3*4

194
2-2. Instrument cluster
VENZA_OM_OM73023U_(U)
Multi-information display (TFT type)
The multi-information display presents the driver with a variety of
driving-related data, including the clock and current outside temper-
ature.
● Clock ( P. 199)
Indicates and sets the time.
● Outside temperature
Indicates the outside temperature.
The temperature range that can be displayed is from -40°F (-40°C) to
122°F (50°C).
●Air conditioning system display ( P. 306)
Automatically displayed when the air conditioning is turned on.
● Trip information ( P. 195)
Displays driving range, fuel consumption and other cruising-related
information.
● Intuitive parking assist display (if equipped) ( P. 235)
● Warning messages ( P. 578)
Automatically displayed when a malfunction occurs in one of the vehi-
cle’s systems.
● Customizable features setting display ( P. 1 9 8645)

195
2-2. Instrument cluster
2
When driving
VENZA_OM_OM73023U_(U)
Switching the display
“INFO” button
“SELECT RESET” button
To reset the functions below,
press the “SELECT RESET” but-
ton.• Average Fuel Economy
• Average Speed
• Trip Timer
“SETUP” button
Trip information
Display items can be switched by pressing the “INFO” button.
■ Average Fuel Economy
Displays the average fuel cons umption since the function was
reset.
● The function can be reset by pressing and holding the “SELECT
RESET” button when the average fuel economy is displayed.
● Use the displayed average fuel consumption as a reference.
■Current Fuel Economy
Displays the current rate of fuel consumption.