phone TOYOTA VENZA 2016 Owner's Manual

3723-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Reconnecting a Bluetooth ®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position (vehicles without a smart key system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart key system),
the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.

3733-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Displaying a Bluetooth ®
device detailsBluetooth ®
device registration status
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device.
Select “Device Info”.
Following screen is displayed:
Device Name
Change connection method
(  P. 374)
Bluetooth ®
Address
Display your telephone num-
ber
The number may not be dis-
played depending on the
model of phone.
Compatibility profile of the
device
Restore default settingsYou can confirm and change th e registered device details.STEP 1
STEP 2
STEP 3
STEP 4

3753-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Detailed Bluetooth ®
system settingsHow to check and change detailed Bluetooth ®
settings
Display the “Bluetooth
* Setup” screen. (  P. 365)
Select “System Settings”.
The following screen is displayed:
Bluetooth ®
Power on/offYou can change Bluetooth ®
func-
tion
on/off
Bluetooth ®
Name
Change PIN-code (  P. 376)
Bluetooth ®
Address
Display Phone Status You can set the system to show
the status confirmation display
when connecting a telephone
Display Audio Player Status You can set the system to show
the status confirmation display
when connecting an audio player
Compatibility profile of the sys-
tem
Restore default settings
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.You can confirm and change the detailed Bluetooth ®
settings.STEP 1
STEP 2
STEP 3

3793-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Using a Bluetooth ®
Phone
Phone screen
To display the screen shown below, press the switch on the
steering wheel or the button.
Several functions are available to operate on each screen that is dis-
played by selecting the 4 tabs.
Device name
Bluetooth ®
connection statusThe hands-free system is a function th at allows you to use your cel-
lular phone without touching it.
This system supports Bluetooth ®
. Bluetooth ®
is a wireless data sys-
tem that allows the cellular phone to wirelessly connect to the
hands-free system and make/receive calls.
Before making a phone call, check the connection status, battery
charge, call area and signal strength. (  P. 381)
If a Bluetooth ®
device cannot be connec ted, check the connection
status on the phone screen. If the de vice is not connected, either
register or reconnect it. (  P. 370)

3803-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Telephone switch (  P. 396)
■ Microphone
The vehicle’s built in microphone
is used when talking on the
phone.
The person you are speaking to
can be heard from the front
speakers.
To use the hands-free system,
you must register your
Bluetooth ®
phone in the system.
(  P. 368)

3813-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Status display
You can check indicators such as signal strength and battery charge
on the phone screen.
Connection status
Signal strength
Battery charge
Indicators Conditions
Connection status Good Poor Not connected
(Blue) (Gray)
Battery charge Full Empty
Signal strength Excellent Poor

3823-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Making a call Dialing
Display the phone screen. (  P. 379)
Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select .
For the first digit, you can enter “+” by selecting “  ” for a while.
Press the switch on the steering wheel or select .
Dialing from the contacts list
You can dial a number from the c ontact data imported from your cel-
lular phone. The system has one contact for each registered phone.
Up to 2500 contacts may be stored in each contact.
Display the phone screen. (  P. 379)
Select “Contacts” tab.
Choose the desired contact to call from the list.
Choose the number and then press the switch on the
steering wheel or select .
When the contact is empty
You can transfer the phone numbers in a Bluetooth ®
phone to the
system.
Operation methods differ between PBAP (Phone Book Access Pro-
file) compatible and PBA P incompatible Bluetooth ®
phones. If the
cellular phone does not support either PBAP or OPP (Object Push
Profile) service, you ca nnot transfer contacts.Once a Bluetooth ®
phone is registered, you can make a call using
the following procedure: STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4

3833-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features ■ For PBAP compatible Bluetooth ®
phones
When “Automatic Contact/History Transfer” is set to off
Select the desired item.
Select to transfer new con-
tacts from a cellular phone,
select “Always” and then
enable “Automatic Contact/
History Transfer”.
Select to transfer all the con-
tacts from a connected cellular
phone only once.
Select to cancel transferring.
■ For PBAP incompatible but OPP compatible Bluetooth ®
phones
Select the desired item.
Select to transfer the contacts
from the connected cellular
phone.
Select to add a new contact
manually.
Select to cancel transferring.
When “Transfer” is selected
Follow the steps in “Update contacts from phone” from
. (  P. 402)
When “Add” is selected
Follow the steps in “Registering a new contact to the contacts
list” from . (  P. 403)STEP 1
STEP 1
STEP 2
STEP 2
STEP 2
STEP2

3843-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Calling using favorites list
You can make a call using numbers registered in the contact.
Display the phone screen. (  P. 379)
Select “Favorites” tab.
Select the desired number to make a call.
Dialing from call history
You can make a call using the call history, which has the 3 functions
below.
: calls which you missed
: calls which you received
: calls which you made
Display the phone screen. (  P. 379)
Select “Call History” tab.
Select or the desired entry from the list.
When is selected
Check that the “Call” screen is displayed.
When the desired contact is selected
Select the desired number.
Check that the “Call” screen is displayed. STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 4
STEP 5

3853-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features ■ Call history list
● If you make a call to or receive a call from a number registered in the
contact, the name is displayed in the call history.
● If you make multiple calls to the same number, only the last call made is
displayed in the call history.
■ International calls
You may not be able to make international calls, depending on the mobile
phone in use.