phone TOYOTA VENZA 2016 Repair Manual

4163-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) When using the Bluetooth ®
message function (if equipped)Symptom Likely cause Solution Page
Cellular
phone This
system
Messages can-
not be viewed. Message trans-
fer is not
enabled on the
cellular phone. Enable mes-
sage transfer
on the cellular
phone (approve
message trans-
fer on the
phone).
* 2

Automatic
transfer function
on this system
is set to off. Set automatic
transfer function
on this system
to on.  P. 408
New message
notifications are
not displayed. Notification of
SMS/MMS/e-
mail reception
on this system
is set to off. Set notification
of SMS/MMS/e-
mail reception
on this system
to on.
* 2
P. 408
Automatic mes-
sage transfer
function is not
enabled on the
cellular phone. Enable auto-
matic transfer
function on the
cellular phone.
* 2
P. 408

4173-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features In other situations Symptom Likely cause Solution Page
Cellular
phone This
system
The Bluetooth ®

connection sta-
tus is displayed
at the top of the
screen each
time the engine
switch is turned
to the “ACC” or
“ON” position
(vehicles with-
out a smart key
system) or
ACCESSORY
or IGNITION
ON mode (vehi-
cles with a
smart key sys-
tem). Connection
confirmation
display on this
system is set to
on. To turn off the
display, set con-
nection confir-
mation display
on this system
to off.  P. 375

4183-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) * 1
: http://www.toyota.com/entune/
* 2
: For details, refer to the owner’s manual that came with the cellular phone. Symptom Likely cause Solution Page
Cellular
phone This
system
Even though all
conceivable
measures have
been taken, the
symptom sta-
tus does not
change. The cellular
phone is not
close enough to
this system. Bring the cellu-
lar phone closer
to this system. 
The cellular
phone is the
most likely
cause of the
symptom. Turn the cellular
phone off,
remove and
reinstall the bat-
tery pack, and
then restart the
cellular phone.
* 2

Enable the cel-
lular phone’s
Bluetooth ®
con-
nection.
* 2

Stop the cellular
phone’s secu-
rity software
and close all
applications.
* 2

Before using an
application
installed on the
cellular phone,
carefully check
its source and
how its opera-
tion might affect
this system.
* 2


4193-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Bluetooth ®■ When using the Bluetooth ®
audio system
● In the following conditions, the system may not function.
• If the portable audio player is turned off
• If the portable audio player is not connected
• If the portable audio player’s battery is low
● There may be a delay if a cellular phone connection is made during
Bluetooth ®
audio play.
● Depending on the type of portable audio player that is connected to the
system, operation may differ slightly and certain functions may not be
available.
■ When using the hands-free system
● The audio system is muted when making a call.
● If both parties speak at the same time, it may be difficult to hear.
● If the received call volume is overly loud, an echo may be heard.
If the Bluetooth ®
phone is too close to the system, quality of the sound
may deteriorate and connection status may deteriorate.
● In the following circumstances, it may be difficult to hear the other party:
• When driving on unpaved roads
• When driving at high speeds
• If a roof or window is open
• If the air conditioning is blowing directly on the microphone
• If there is interference from the network of the cellular phone

4203-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Conditions under which th e system will not operate
● If using a cellular phone that does not support Bluetooth ®
● If the cellular phone is turned off
● If you are outside of cellular phone service coverage
● If the cellular phone is not connected
● If the cellular phone’s battery is low
● When outgoing calls are controlled, due to heavy traffic on telephone
lines, etc.
● When the cellular phone itself cannot be used
● When transferring contact data from the cellular phone
■ Bluetooth ®
antenna
The antenna is built into the display.
If the portable audio player is behind the seat or in the glove box or console
box, or is touching or covered by metal objects, the connection status may
deteriorate.
If the cellular phone is behind the seat or in the console box, or touching or
covered by metal objects, the connection status may deteriorate.
■ Battery charge/signal status
● This display may not correspond exactly with the portable audio player or
cellular phone itself.
● This system does not have a charging function.
● The portable audio player or cellular phone battery will be depleted
quickly when the device is connected to Bluetooth ®
.

4213-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features ■ When using the Bluetooth ®
audio and hands-free system at the same
time
The following problems may occur.
● The Bluetooth ®
audio connection may be interrupted.
● Noise may be heard during Bluetooth ®
audio playback.
■ About the contact in this system
The following data is stored for every registered cellular phone. When
another phone is connecting, you cannot read the registered data.
● Contact data
● Call history
● Favorite
When removing a Bluetooth ®
phone from the system, the above-mentioned
data is also deleted.
■ About Bluetooth ®
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Panasonic Corpo-
ration is under license.
Other trademarks and trade names are
those of their respective owners.

4223-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Compatible models
The Bluetooth ®
audio system supports portable audio players with the fol-
lowing specifications
● Bluetooth ®
specifications:
Ver. 1.1, or higher (Recommended: Ver. 3.0+EDR or higher)
● Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher
(Recommended: Ver. 1.2 or higher)
This is a profile to transmit stereo audio to the audio system.
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher
(Recommended: Ver. 1.4 or higher)
This is a profile to allow remote control the A/V equipment.
However, please note that some functions may be limited depending on the
type of portable audio player connected.
The hands-free system supports cellular phones with the following specifica-
tions.
● Bluetooth ®
specification:
Ver. 1.1 or higher (Recommended: Ver. 3.0+EDR or higher)
● Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6
or higher)
This is a profile to allow hands-free phone calls using a cellular phone
or head set. It has outgoing and incoming call functions.
• OPP (Object Push Profile) Ver. 1. 1 or higher (Recommended: Ver. 1.2)
This is a profile to transfer contact data. When a Bluetooth ®
compatible
cellular phone has both PBAP and OPP, OPP cannot be used.
• PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Recommended:
Ver. 1.1)
This is a profile to transfer contact data.
• MAP (Message Access Profile) Ver. 1.0 or higher
If the cellular phone does not support HFP, you cannot register it with the
hands-free system.

4243-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Reconnecting the portable audio player
If the portable audio player is disconnected due to poor reception when the
engine switch is in the “ACC” or “ON” position (vehicles without a smart key
system) or ACCESSORY or IGNITION ON mode (vehicles with a smart key
system), the system automatically reconnects the portable audio player.
If you have switched off the portable audio player yourself, follow the instruc-
tions below to reconnect:
● Select the portable audio player again
● Enter the portable audio player
■ When you sell your car
Be sure to delete your personal data. (  P. 331)
CAUTION■ While driving
Do not operate the portable audio player, cellular phone or connect a device
to the Bluetooth ®
system.
■ Caution regarding interfer ence with electronic devices
● Your audio unit is fitted with Bluetooth ®
antennas. People with implantable
cardiac pacemakers, cardiac resynchronization therapy-pacemakers or
implantable cardioverter defibrillators should maintain a reasonable dis-
tance between themselves and the Bluetooth ®
antennas. The radio waves
may affect the operation of such devices.
● Before using Bluetooth ®
devices, users of any electrical medical device
other than implantable cardiac pacemakers, cardiac resynchronization
therapy-pacemakers or implantable cardioverter defibrillators should con-
sult the manufacturer of the device for information about its operation
under the influence of radio waves. Radio waves could have unexpected
effects on the operation of such medical devices.

4253-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features NOTICE■ When leaving the vehicle
Do not leave your portable audio player or cellular phone in the vehicle. The
inside of the vehicle may become hot, causing damage to the portable audio
player or cellular phone.

4273-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features ■ Microphone
 P. 380
■ When using the microphone
● It is unnecessary to speak directly into the microphone when giving a
command.
● Voice commands may not be recognized if:
• They are spoken too quickly.
• They are spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
● In the following conditions, the system may not recognize the command
properly and using voice commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents
or speech patterns may be difficult for the system to recognize.
• There is excessive background noise, such as wind noise.