phone TOYOTA VENZA 2016 Service Manual

3963-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Using the steering wheel switches Operating a telephone using the steering wheel switches
Volume switch
• Increase/Decrease the vol-
ume
• Press and hold:
Continuously increase/
decrease the volume
Enter switch
• Select an item
Cursor switch
• Select a list/tab
Off hook switch
• Make a call
• Receive a call
• Display “Phone” screen
On hook switch
•End a call
• Refuse a callThe steering wheel switches can be used to operate a connected cel-
lular phone.

3973-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Bluetooth ®
phone settings“Phone/Message Settings” screen
To display the screen shown belo w, press the “S ETUP” button, and
select “Phone” on the “Setup” screen.
Set the phone connection
(  P. 368)
Setting the sound (  P. 398)
Contact/Call History Settings
(  P. 399)
Set the message settings
(  P. 408)
Set the phone display
(  P. 410)You can adjust the hands-free syst em to your desired settings.

3983-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Sound setting
Display the “Phone/Message Settings” screen. (  P. 397)
Select “Sound Settings” on the “Phone/Message Settings”
screen.
Set the desired ringtone.
Adjust the ringtone volume.
Adjust the message readout
volume.
Set the desired incoming
SMS/MMS tone.
Adjust the incoming SMS/
MMS tone volume.
Set the incoming e-mail tone.
Adjust the incoming e-mail
tone volume.
Adjust the default volume of
the other party’s voice.STEP 1
STEP 2
■ To return to the default settings
Select “Default”, and then “Yes”.

3993-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Contact/Call Histor y Settings The contact can be transferred from a Bluetooth ®
phone to the sys-
tem. The contact also can be added, edited and deleted.
The call history can be deleted and contact and favorites can be
changed.
Display the “Phone/Message Settings” screen. (  P. 397)
Select “Contact/Ca ll History Settings”.STEP 1
STEP 2

4003-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Select the desired item to be set.
For PBAP compatible
Bluetooth ®
phones, select to
set automatic contact/history
transfer on/off. When set to
on, the phone’s contact data
and history are automatically
transferred.
Select to update contacts from
the connected phone.
(  P. 401)
Select to sort contacts by the
first name or last name field.
Select to add contacts to the
favorites list. (  P. 405)
Select to delete contacts from
the favorites list. (  P. 407)
Select to clear contacts from
the call history.
* Select to add new contacts to
the contact list.
* (  P. 403)
Select to edit contacts in the
contact list.
* (  P. 404)
Select to delete contacts from
the contact list.
* (  P. 405)
Select to reset all setup items.
* : For PBAP compatible Bluetooth ®
phones only, this function is avail-
able when “Automatic Contact/
History Transfer” is set to off.
(  P. 399)STEP 3

4013-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Update contacts from phone
Operation methods differ between PBAP compatible and PBAP
incompatible but OPP compatible Bluetooth ®
phones.
If your cellular phone is neither PBAP nor OPP compatible, the con-
tacts cannot be transferred.
■ For PBAP compatible Bluetooth ®
Phones
Select “Update Contacts from Phone”.
Check that a confirmation screen is displayed when the oper-
ation is complete. This operation may be unnecessary depending on the type of cellu-
lar phone.
Depending on the type of cellular phone, OBEX authentication may
be required when transferring contact data. Enter “1234” into the
Bluetooth ®
phone.
If another Bluetooth ®
device is connected when transferring contact
data, depending on the phone, the connected Bluetooth ®
device
may need to be disconnected.
Depending on the type of Bluetooth ®
phone being connected, it may
be necessary to perform additional steps on the phone. STEP 1
STEP 2

4023-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ For PBAP incompatible but OPP compatible Bluetooth ®
Phones
Select “Update Contacts from Phone”.
Transfer the contact data to the system using a Bluetooth ®
phone. This operation may be unnecessary depending on the type of cellu-
lar phone.
Depending on the type of cellular phone, OBEX authentication may
be required when transferring contact data. Enter “1234” into the
Bluetooth ®
phone.
To cancel this function, select “Cancel”.
Select “Done” when it appears on the screen.
Check that a confirmation screen is displayed when the oper-
ation is complete.
■ Updating the contacts in a different way (From the “Call His-
tory” screen)
For PBAP compatible Bluetooth ®
phones, this function is available
when “Automatic Contact/History Transfer” is set to off. (  P. 399)
Display the phone screen. (  P. 379)
Select the “Call History” tab and select a contact not yet regis-
tered in the contact list.
Select “Update Contact”.
Select the desired contact.
Select a phone type for the phone number. STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

4033-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Registering a new contact to the contact list
New contact data can be registered. Up to 4 numbers per person can
be registered. For PBAP compatible Bluetooth ®
phones, this function
is available when “Automatic Cont act/History Transfer” is set to off.
(  P. 399)
Select “New Contact”.
Enter the name and select “OK”.
Enter the phone number and select “OK”.
Select the phone type for the phone number.
To add another number to this contact, select “Yes”.
■ Registering a new contact in a different way (From the “Call
History” screen)
Display the phone screen. (  P. 379)
Select the “Call History” tab and select a contact not yet regis-
tered in the contact list.
Select “Add to Contacts”.
Follow the steps in “Registering a new contact to the contacts
list” from . (  P. 403)STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP3

4043-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Editing the contact data
For PBAP compatible Bluetooth ®
phones, this function is available
when “Automatic Contact/History Transfer” is set to off. (  P. 399)
Select “Edit Contact”.
Select the desired contact.
Select corresponding to the desired name or number.
For editing the name
Follow the steps in “Registering a new contact to the contacts
list” from . (  P. 403)
For editing the number
Follow the steps in “Registering a new contact to the contacts
list” from . (  P. 403)
■ Editing the contacts in a different way (From the “Contact
Details” screen)
Display the phone screen. (  P. 379)
Select the “Contacts”, “Call History” tab or the “Favorites” tab
and select the desired contact.
Select “Edit Contact”. “E-mail Addresses”: Select to disp lay all registered e-mail addresses
for the contact.
Follow the steps in “Editing the contact data” from .
(  P. 404) STEP 1
STEP 2
STEP 3
STEP 4
STEP2
STEP 4
STEP3
STEP 1
STEP 2
STEP 3
STEP 4 STEP4

4053-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Deleting the contact data
For PBAP compatible Bluetooth ®
phones, this function is available
when “Automatic Contact/History Transfer” is set to off. (  P. 399)
Select “Delete Contacts”.
Select the desired contact and select “Delete”.
Select “Yes” when the conf irmation screen appears.
■ Deleting the contact in a different way (From the “Contact
Details” screen)
Display the phone screen. (  P. 379)
Select the “Contacts”, “Call history” tab or the “Favorites” tab
and select the desired contact.
Select “Edit Contact”.
Select “Yes” when the conf irmation screen appears.
Favorites list setting
Up to 15 contacts (maximum of 4 numbers per contact) can be regis-
tered in the favorites list.
■ Registering the contacts in the favorites list
Select “Add Favorite”.
Select the desired contact to add to the favorites list. Dimmed contacts are already stored as a favorite.
Check that a confirmation screen is displayed when the oper-
ation is complete. STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3