ECO mode TOYOTA xB 2012 Accessories, Audio & Navigation (in English)

9
9

Steering Switch Operations
This section contains an explanation regarding audio -related operations involving utilization of the steering switch.
1 [MODE]Each time this button is pressed, the source changes in the order indi-cated below.FM d Disk (CD or MP3 or WMA) d USB or iPod d Pandora d Bluetooth audio d A/V or AUX d SAT d AM (d FM)* When the power is on or after the end of a traffic report, the source is automatically switched back to what was being used immediately before-hand.
* Any unconnected devices, discs or
sources that cannot be played back due to antenna errors or the like are skipped over in the above -noted sequence.
If the MODE button is kept pressed down for 0.8 seconds or more, a beep is emitted and the following
actions are performed.
•If you press the button again, play-back is resumed.
SourceActions when the button
is kept pressed down for
0.8 seconds of longer
CDPlayback is paused.
MP3
WMA
USB
iPod
Pandora
Bluetooth
audio
AMThe sound is muted.
FM
SAT
AUXVideo playback continues,
but the sound is muted.A / V
2 [Λ]Actions vary depending on the source that is being selected and the length of time the button is pressed down.
SourceActions
when
pressed
down
Actions when
the button is
kept pressed
down for 0.8
seconds of
longer
CDThe next
track is
played
back.
Nothing
happens.
MP3The next
file is
played
back.
The first song
in the next
folder is played
back.
WMA
USBThe next
file is
played
back.
The first song
in the next
folder is played
back.
iPodThe next
file is
played
back.
Nothing
happens.
PandoraThe next
station is
tuned in.
Nothing
happens.

17
17

Changing the Frequency
Manually
Touch [] and then, after chang-ing the MULTI SELECTOR to TUNE mode, turn the MULTI SELECTOR to the right to increase the frequency and to the left to decrease the fre-quency.• If the volume fluctuates, touch [] to change to the TUNE mode, where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [] or [] to search in either ascending or descending order for stations that can be tuned in. When a station is detected, that station will be tuned in. If you press down on either of these for 1.5 seconds or longer, even with frequency loops, the SEEK function continues to operate (Non-stop SEEK function). If you release either during operations of the Non-Stop SEEK function, the SEEK function will take over.For FM, the PT Y select function is activated when the PT Y genre is established. However, when the Non-Stop SEEK function is active, the PT Y selection function is can-
celled.
•
•
Listening to Preset Channels
Touch [Presets] to display the Preset screen. Touch on any channel from 1 to 6 on the Preset screen. Frequencies recorded on the preset channel will be tuned in. Touch [>>] to switch the display to the next preset page, and [<<] to switch the display to the previous preset page.
The pages change in the order of AM d FM1 d FM2 d SAT1 d SAT2 d SAT3 (d Return to AM). (SAT is only displayed when the SAT unit is con-nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on the Preset screen, continuing to touch the channel for 1.7 seconds or longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [] to temporarily mute the sound. Touch [] to resume audio output.
•
•
•
Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-cies that can be tuned in. Audio output will be produced in 5 -second snippets for stations that have been located. If you touch on [SCAN] again during the time of the audio output from the station you want to listen to, that station will be tuned in. When setting the PT Y genre, audio from stations applicable to the PT Y genre that has been set up is output continuously in 5 -second snippets. If you again touch [SCAN], the broad-cast being output will continue to be tuned in and you will be able to select a PT Y genre. If you loop the search for stations without touching [SCAN], a beeping sound will be emitted and the last radio station to be picked up will be tuned in and then you will be able to select a PT Y genre (Only for XM Satellite Radio). Audio broadcasts cor-responding to the current categories are continuously output in 5 -second snippets. If you touch [SCAN] again, you will continue to receive the broad-cast being output. If you loop the detection of stations without touching [SCAN], you will hear a beeping sound and the last station to be received will be tuned in.
•

1
1

Storing Song Information that
is Being Tuned In on HD Radio
Broadcast
If you touch [Tag] while the HD Radio broadcast signal is being received, the tag information of the song that being broadcast is stored.Sometimes when songs are being toggled and the like, tag information cannot be accessed very effectively or multiple tags are recorded.
Viewing HD Radio Broadcast
Text Information
Touch [Text] to display the Text Display screen, where music, title, artist name, album title and genre name are displayed. Touch [Additional Information] to dis-play the Additional Information screen.
Touch [] or [] to scroll the page.
Touch [] to return to the HD Radio Screen.
•
•
Setting up the HD Radio
Broadcast Reception Method
Touch on [HD Radio] to switch over to analogue mode and tune in ana-logue broadcasts. Touch [HD Radio] again to switch over to digital mode and tune in digital broadcasts.
Multicast Channel Support
When receiving the HD Radio Broadcast signal and tuning in a Multicast Channel-supported broadcast in something other than analogue, the following actions will occur each time you touch on [Multicast].
When
receiving
MPS
signal
The next SPS is tuned in.
When
receiving
SPS
signal
The next SPS is tuned in.
When
receiving
last SPS
MPS is tuned in.
•
•

53
53

Setting Up the Sound
Quality
Touch on [] for each mode
screen to display the SOUND
SET TINGS MENU. On the SOUND
SET TINGS MENU, a variety of
settings related to sound quality
can be established.
Setting the Sound Quality
Touch [] on the Sound Settings menu to display the Sound Settings menu and then touch on the settings that follow to set them up. After establishing the settings, touch [OK] to return to the previous screen.
[TREBLE]Used to adjust high-
pitched tones.
[–] or [+]Each time you touch
[+], the treble level
increases up to a
maximum level of 5.
Each time you touch
[–], the treble level
decreases up to a
minimum level of - 5.
•
[BASS]Used to adjust low-pitched tones.
[–] or [+]Each time you touch [+], the bass level increases up to a maximum level of 5. Each time you touch [–], the bass level decreases up to a minimum level of -5.
[BAL ANCE]Used to adjust the sound balance between the left and right speakers.
[L] or [R]Each time you touch [L], the balance steps increase up to a maximum level of 7. Each time you touch [R], the balance steps decrease up to a minimum level of -7.
[FADER]Used to adjust the sound balance between the rear and
front speakers.
[Front] or
[Rear]
Each time you touch [Front], the balance steps increase up to a maximum level of 7. Each time you touch
[Rear], the balance steps decrease up to a minimum level of -7.
Setting Up Digital Sound
Processing
Touch [DSP] on the Sound Settings menu to display the DSP Settings menu and then touch on the settings that follow to set them up.
[Automatic
Sound
Levelizer]
During driving, noise
in the car changes
according to the
driving speed. The
automatic sound
levelizer (ASL)
monitors such
varying noise and
automatically increases
the volume level. If
this noise becomes
greater, the sensitivity
(variation of volume
level to noise level) of
ASL can be set to one
of three levels([Low]/
[MID]/ [HIGH]).
Touch [Off] to
deactivate the
Automatic Sound
Levelizer.
•

63
63

Deleting Call Histories
You can select the histories of recent calls, missed calls and outgoing calls and then delete these call histories.
1. Touch [Manage Speed Dials] d
[Delete Call History] on the
Phonebook Settings screen.
2. Touch on one of the selections
from below.
[Delete
Resent
Calls]
Selects the history
of recent calls for
deletion.
[Delete
Missed
Calls]
Selects the history
of missed calls for
deletion.
[Delete
Incoming
Calls]
Selects the history
of incoming calls for
deletion.
[Delete
Outgoing
Calls]
Selects the history
of outgoing calls for
deletion.
3. Touch on the histories that you
want to cancel.* To delete all call histories, touch [All Delete].
•Using Voice Recognition
With the voice recognition
function, you can control the
system using only your voice.
NOTICE
When using voice recognition,
close the windows and take
other steps to eliminate
background noise.
You don’t need to talk directly
into the microphone; your
voice will successfully reach
the microphone when you talk
in a normal sitting position as
you drive.
•
•
1. You can activate the voice
recognition mode by continuing
to touch [] for 0.8 seconds or
longer.
2. Following the screen display
prompts, give the voice
commands in a clear voice.
(For example, say “Dial 0123456789”
to dial the number 0123456789.)
[New Speed
Dial from
Call History]
Registers Speed Dial
entries from the Call
History. Touch the
telephone number that
you want to register to
Speed Dial.
2. Touch the location you want to
register on the Select Speed Dial
Location screen.
* Touch on [Speed Dial1] - [Speed Dial3] to toggle the tabs.
Deleting Speed Dial entries
Cancel phone numbers that have been registered on Speed Dial.
1. Touch [Manage Speed Dials]
d
[Delete Speed Dial] on the Speed
Dials screen.
2. Touch on the number that you
want to delete from Speed Dial.* To delete all Speed Dial entries, touch [All Delete].