ECU TOYOTA xB 2013 Warranties & Maintenance Guides (in English)

THE NEW WORLD OF
ANTI-THEFT
TECHNOLOGY
This Scion vehicle may be equipped
with an electronic “immobilizer”
anti-theft system. When the key is
inserted into the ignition switch it
transmits an electronic code to an
immobilizer computer. The engine will
only start if the code in the key matches
the code in the immobilizer. If the code
does not match, the immobilizer
disables the ignition and fuel systems.
While an exact physical copy of the key
will open the door and allow retrieval of
items locked in the vehicle, it won’t
start the vehicle unless the key has the
same code as the immobilizer.
SECURITY
For security purposes, access to key
codes and service procedures for
electronically registering replacement
keys is restricted. Only an Authorized
Servicing Dealership* or certain
bonded/registered independent
locksmiths can generate replacement
keys.
* For the purposes of this system, an Authorized Servicing Dealership is a Scion dealership or a Toyota dealership.
THE IMMOBILIZER KEY
INTRODUCTION
Introduction6Enfocus Software - Customer Support

REPLACING THE KEY
Upon purchase, each vehicle should
have two master keys and an
aluminum tag with a key-code
imprinted on it.
To generate a fully functional
replacement key (one that will both
open the doors and start the engine),
one of the master keys is required. To
make a key that will open the door for
retrieval of items locked inside the
vehicle, the aluminum key-code tag can
be used. If a master key or the
aluminum key-code tag is not available,
an Authorized Servicing Dealership or
certain registered locksmiths can
obtain the key code from a
restricted-access database. These
businesses can also access a service
utility to reprogram the immobilizer if
all registered master keys have been
lost. If an Authorized Servicing
Dealership is not available, please refer
to www.aloa.orgto find a
bonded/registered locksmith who
performs high security key service.
KEEPING THE KEY SAFE
Replacing an immobilizer key may be
costly. It is advisable to keep a spare
master key and the aluminum key-code
tag in a safe place. If you record the
key-code in more than one place, do
not record it in a way that can be easily
identified and associated with the
vehicle. It is wise to keep a copy of the
key-code outside of the vehicle.
If the vehicle was delivered with less
than two keys and the aluminum
key-code tag, consider having an
Authorized Servicing Dealership or a
qualified independent automotive
locksmith make a duplicate key before
you need it.
THE IMMOBILIZER KEY
INTRODUCTION
Introduction7Enfocus Software - Customer Support

Driver’s Floor Mat
>Only use the driver’s floor mat
designed specifically for the model
and model year of your vehicle.
>Always properly secure the driver’s
floor mat using the retaining hooks.
>Never install another floor mat on
top of the existing driver’s floor mat.
>Never install the driver’s floor mat
upside down.
Engine Air Filter
Replace at specified intervals. When
performing inspections, check for
damage, excessive wear and oiliness,
and replace if necessary.
Engine Coolant
Drain the cooling system and refill with
an ethylene-glycol type coolant. Inspect
the radiator, condenser and/or
intercooler for leaves, dirt and insects,
and clean if necessary. Inspect hoses
and connections for corrosion and
leaks. Tighten connections and replace
parts when necessary. A qualified
technician should perform these
operations. (For further details, refer to
 Radiator, Condenser and Hosesin the
 Vehicle Maintenance and Caresection
of theOwner’s Manual).
Your Scion is equipped with Genuine
Toyota Super Long-Life Coolant.
The replacement intervals for
engine coolant recommended in
this booklet are based on
replacement with Genuine Toyota
Super Long-Life Coolant or similar
high-quality non-silicate,
non-amine, non-borate
ethylene-glycol coolant with
long-life hybrid organic acid
technology (i.e., a combination of
low phosphates and organic acids).
If another type of ethylene-glycol
coolant is used, replacement
intervals may be different.
Engine Oil and Oil Filter
Replace the oil filter and drain and
refill the engine oil at specified
intervals. For recommended oil grade
and viscosity, refer to theOwner’s
Manual.
Engine Valve Clearance
Inspect for tappet noise and engine
vibration and adjust if necessary. A
qualified technician should perform
this operation.
EXPLANATION OF MAINTENANCE ITEMS
Maintenance Log53
MAINTENANCEEnfocus Software - Customer Support