reset TOYOTA xD 2012 Accessories, Audio & Navigation (in English)

1
1 

Listening to the RADIO
1 FM1/2Switches between FM1 and FM2 modes.
2 AM•SATSwitches between the AM mode and SAT1/2/3 modes. (must have Satellite Radio receiver and antenna installed at an additional charge to listen to Satellite Radio.)
3 LISTPress to display the registered broad-casting station list in PRESET1- 6.Use the ROTARY ENCODER to select a station from the list.

13
13

4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clockwise or counterclockwise to select a station. Press the ROTARY ENCODER to set the station. If you press and hold the ROTARY ENCODER in the center until you hear a beep, the currently tuned sta-tion is stored as a preset channel in the preset channel list.
5 RIGHT (TUNE )Press to manually select (one step at a time) the station with the next higher frequency. Press and hold to fast-forward to a higher frequency.
6 UP (TUNE )Press to select the next higher sta-tion.Press and hold to continue searching for a higher frequency station.
7 LEFT (TUNE )Press to manually select (one step at a time) the station with the next lower frequency. Press and hold to fast-forward to a lower frequency.
8 DOWN (TUNE )Press to select the next lower station.Press and hold to continue searching for a lower frequency station.
9 PRESET 1-6Press to recall previously stored sta-tions (Preset Channels).Press and hold until you hear a beep, and the station you are cur-rently tuned to is stored as a Preset Channel.
NOTICE
You can store up to 6 stations
per band.
a SCANIf you press, is indicated in the display. The tuner begins searching for stations with good reception and you can listen to each channel for 5 seconds.

17
17

1 DISCSwitches to the CD mode. (Only effective if a disc is loaded.)
2 h (EJECT)Press to eject the disc.
3 LISTPress to display a CD List.Use the ROTARY ENCODER to select a CD from the list.
4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select the desired title. Press the ROTARY ENCODER in the center to start play-back.
• No CD List is displayed when play-ing back a CD containing no text information.
5 UP/DOWN (SELECT LIST)Press to select the desired title.
6 RIGHT (TRACK )Press to proceed to the next track. Press and hold until you hear a beep. Playing of the track is fast forwarded. ( There is sound.)
7 LEFT (TRACK )Press to takes you back to the start of the track currently playing. Press to return to the previous track once more.Press and hold until you hear a beep. Playing of the track is reversed. ( There is sound.)
8 PRESET1 (PLAY/PAUSE)To pause the CD, press PRESET 1 while the CD is playing. Press again to resume playing.
9 PRESET5 (Random)If you press this, and is indicated in the display. This unit starts to play tracks on the disc being played in random order. Press again to cancel.
a PRESET6 (Repeat)If you press this, and is indi-cated in the display. This unit starts to repeat the track being played. Press again to cancel.
b SCANIf you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each track on the CD being played. Press again to cancel.
c TEXTPress, and display indications change as follows ( TEX T CD only):
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Disc Title Track Title
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.
CAUTION
Compact disc players use an
invisible laser beam which
could cause hazardous radiation
exposure if directed outside
the unit. Be sure to operate the
player correctly.

19
19

5 RIGHT (TRACK )Press to proceed to the next file. Press and hold until you hear a beep. Playing of the file is fast forwarded. ( There is no sound.)
6 LEFT (TRACK )Press to takes you back to the start of the file currently playing. Press to return to the previous file once more. Press and hold until you hear a beep. Playing of the file is reversed. ( There is no sound.)
7 UP (FOLDER )Press to proceed to the next folder.
8 DOWN (FOLDER )Press to return to the previous folder. Press and hold until you hear a beep to jump to HOME. HOME means returning back to play the first file in the first folder on the CD being played.
9 PRESET1 (PLAY/PAUSE)To pause the track, press PRESET
1 while the track is playing. Press again to resume playing.
a PRESET5 (Random)If you press this, and is indi-cated in the display. This unit starts to play files in the folder being played in random order. Press again to can-cel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play files in all folders on the disc being played in random order. Press again to cancel.
b PRESET 6 (Repeat)If you press this, and is indi-
cated in the display. This unit starts to repeat the file being played. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to repeat the folder being played. Press again to cancel.
c SCANIf you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each file in the folder being played. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play the first 10 seconds of the first file of each folder. Press again to cancel.
d TEXTPress and display indications change as follows:
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Folder Name File Name
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.




NOTICE
To resolve most problems
when using your iPod with
the Scion Audio system,
disconnect your iPod from the
vehicle iPod connection and
reset it.
For instructions on how to
reset your iPod, refer to the
User Guide of your iPod.
Connect the Dock connector
directly to the iPod with
Dock connector port. Do not
connect it via the iPod Dock
or other connection.
When the iPod is connected
to this unit, sound will
also be heard from the
headphone of the iPod.
Disconnect the headphone
from the iPod before use.
If you install an audio
system other than a Scion
Genuine Audio, you will
not be able to use the USB
connector.
•
•
•
•
•
If the iPod does not operate
with Scion Audio system,
disconnect the connector
from the iPod and re-
connect again.
When you are using
iPhone by the multitasking,
according to the application
under use, it might not be
able to charge a battery.
•
•
Disconnecting the iPod
Remove the connector.
When disconnecting the iPod connector, grasp the connector firmly and pull it towards you.

5
5

4 RIGHT (TRACK ,
CHAPTER)Press to proceed to the next track or chapter. Press and hold to the right until you hear a beep. Playing of the track is fast forwarded.
5 LEFT (TRACK ,
CHAPTER )Press to takes you back to the begin-ning of the track currently playing or previous chapter.
Press to return to the previous track or chapter once more.Press and hold until you hear a beep. Playing of the track is reversed.
6 PRESET1 (PLAY/PAUSE)To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.
7 PRESET5 (Random)If you press this, is indicated in the display. This unit starts to play tracks on the iPod being played in random order.Pressing PRESET5 repeatedly switches between the contents of random and Off.The random changes as follows:Track Shuffle  Album Shuffle  Off Press and hold PRESET5 to set Shuffle all.
8 PRESET6 (Repeat)
If you press this, and is indi-cated in the display. This unit starts to repeat the track being played. Press again to cancel.
9 TEXTText information recorded on the iPod can be displayed.Up to 16 characters can be displayed at once.Press and display indications change as follows:
Upper: Artist NameLower: Song Title Song TitleELAPSED TIME
Album Title Song Title
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.
NOTICE
You cannot use the iPod’s
remote control at the same
time.
You may hear noise if you
disconnect during iPod
playback.
The SCAN operation is not
available when listening to
the iPod.
•
•
•

34
34

Listening to a XM
Satellite Radio
broadcast
1 AM•SATSwitches between the AM mode and SAT1/2/3 modes.
NOTICE
Must have XM Satellite Radio
receiver, antenna and service
installed at an additional charge
to listen to XM Satellite Radio.
(Refer to pages 30 to 31.)
2 LISTPress to select the preset channel list mode.Use the ROTARY ENCODER to select a channel from the list.

35
35

3 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select the desired channel. Broadcast will start by pressing. If you press and hold until you hear a beep, the cur-rently tuned station is stored as a preset channel in the preset channel list.
4 RIGHT (TUNE )Press to select the next higher chan-
nel.If you press and hold, you can rapidly scroll forward through the channels.While displaying Channel Category by T YPE UP/DOWN, you can select the next channel forward within the currently selected type (Channel Category) by pressing.
5 LEFT (TUNE )Press to select the previous channel.If you press and hold, you can rapidly scroll down through the channels.While displaying Channel Category by T YPE UP/DOWN, you can select the previous channel within the currently selected type (Channel Category) by pressing the ROTARY ENCODER to the left.
6 UP (TYPE )Press to see the Channel Category of the channel that is currently received.When Channel Category is dis-played, press again to switch to the next category.
7 DOWN (TYPE )Press to see Channel Category of channel that is currently received.When Channel Category is dis-played, press again to switch to the previous category.
8 PRESET1-6Press to recall previously stored channels (Preset Channels).Press and hold until you hear a beep, and the channel you are currently receiving will be stored as a Preset Channel.
NOTICE
You can store up to 6 channels
per band.
9 SCANIf you press, is indicated in the display. SCAN of the currently selected type (Channel Category) starts and the tuner begins search-ing for stations with good reception. You can listen to each channel for 5 seconds.
a TEXTPress this button and the indications in the display changes as follows:
Lower: Artist NameUpper: Song Title Channel NameSong Title
NOTICE
About the Display
Up to a maximum of 10
alphanumeric characters can be
displayed.
(Some information will not be
fully displayed.)

43
43

5 DOWN (ALBUM )Tasks can be performed when sup-ported by your Bluetooth device. Press to return to the previous album.
6 PRESET1(PLAY/PAUSE)Tasks can be performed when sup-ported by your Bluetooth device. To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.
7 PRESET5 (Random)Tasks can be performed when sup-ported by your Bluetooth device. If you press this, and is indi-cated in the display. This unit starts to play files in the folder being played in random order. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play files in all folders on the disc being played in random order. Press again to cancel.
8 PRESET 6 (Repeat)Tasks can be performed when sup-ported by your Bluetooth device. If you press this, and is indi-cated in the display. This unit starts to repeat the file being played. Press again to cancel.If you press and hold until you hear a
beep, and is indicated in the display. This unit starts to repeat the folder being played. Press again to cancel.
9 SCANTasks can be performed when sup-ported by your Bluetooth device. If you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each file in the folder being played. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play the first 10 seconds of the first file of each folder. Press again to cancel.
a TEXTTasks can be performed when sup-ported by your Bluetooth device. Press and display indications change as follows:
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Album Title Track Title
If the profile of your Bluetooth device is AVRCP 1.0, the display cannot be switched. “STREAMING AUDIO” is displayed.When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-
played.

45
45

Registering a Contact to Speed Dialing
You can register phone numbers from the phonebook in this unit to speed dialing.
1 Turn the ROTARY ENCODER
to select ADD SD, and press the ROTARY ENCODER.
2 Turn the ROTARY ENCODER
to select the contact name (or phone number) you want to register to speed dialing and press the ROTARY ENCODER, and press PRESET 1 - 5.
If you turn the ROTARY
ENCODER to select A-Z SEARCH and press the ROTARY ENCODER, you can select the first letter of the contact name and narrow down the search. Select the first letter of the name from the alphabet (A to Z) or select OTHERS (numbers from 0 to 9 and symbols).
3 Turn the ROTARY ENCODER
to select YES, and press the ROTARY ENCODER.
Registration to speed dial
-ing is completed when “REGISTERED” is displayed.
•Deleting a Phonebook Used With Another Phone
You can delete a phonebook used with another phone.
1 Turn the ROTARY ENCODER
to select DEL OTHER PB, and press the ROTARY ENCODER.
2 Turn the ROTARY ENCODER
to select the name of the phone in which the phonebook you want to delete is used, and press the ROTARY ENCODER.
3 Turn the ROTARY ENCODER
to select YES, and press the ROTARY ENCODER.
Deletion is completed when
“DELETED” is displayed.
•Deleting a Call History
You can delete the call histories in this unit.
1 Turn the ROTARY ENCODER
to select DEL HISTORY, and press the ROTARY ENCODER.
2 Turn the ROTARY ENCODER
to select the history type (ALL CALLS, MISSED CALLS, INCOMING CALLS or OUTGOING CALLS), and press the ROTARY ENCODER.
3 Turn the ROTARY ENCODER
to select ALL DELETE or the individual history you want to delete, and press the ROTARY ENCODER.
4 Turn the ROTARY ENCODER
to select YES, and press the ROTARY ENCODER.
Deletion is completed when
“DELETED” is displayed.
•