instrument cluster TOYOTA YARIS 2019 Owners Manual (in English)

YARIS SEDAN_OM_OM99S50z_(U)
1833-4. Switches and Controls
3
When Driving
When the lights are turned on, the
lights-on indicator light in the com-
bination meter turns on.
■Auto-light control (if equipped)
When the headlight switch is in the position and the ignition is
switched ON, the light sensor senses the surrounding lightness or
darkness and automatical ly turns the headlights, other exterior
lights and dashboard illumination on or off.
■ Headlights
●If the light switch is left on, the lights will automatically switch off approxi-
mately 30 seconds after switching the ignition off.
The time setting can be changed.
Refer to Customizable Features on P. 584.
● To prevent discharging the battery, do not leave the lights on while the
engine is off unless safety requires them.
■ Auto-light control
●The headlights, other exterior lights and dashboard illuminatio n may not turn
off immediately even if the surrounding area becomes well-lit because the
light sensor determines that it is night time if the surrounding area is contin-
uously dark for several minutes such as inside long tunnels, tr affic jams
inside tunnels, or in indoor parking lots.
In this case, the lights turn off if the light switch is turned to the position.
● If the headlight switch and the windshield wiper switch are in , and the
wipers are operated at low or high speed by the auto wiper cont rol for sev-
eral seconds, bad weather conditions are determined and the hea dlights
may be turned on.
● The dashboard illumination can be adjusted by rotating the knob in the
instrument cluster.
Also, the day/night mode can be changed by rotating the knob un til a beep
sound is heard.
To adjust the brightness of the dashboard illumination:
Refer to Dashboard Illumination on P. 158.
● The sensitivity of the auto-light control may be changed.
Refer to Customizable Features on P. 584.

212
YARIS SEDAN_OM_OM99S50z_(U)
3-7. Fuel Economy Monitor
Because the average fuel economy indication on the instrument clus-
ter display is linked with the “ Average Fuel Economy History” ( Cur-
rent) indication on the center d isplay, when one is reset the other is
also reset.
In addition, switching between reset and no reset of the averag e fuel
economy indication on the instrument cluster display and the “A ver-
age Fuel Economy History” (Curre nt) indication on the center display
when resetting the trip meter (Trip A) is possible.
X: Reset
-: Not reset
*1: Can be personalized. Refer to Customizable Features on P. 584.
Fuel Economy Data Reset and Trip Meter (TRIP A) Synchroniza-
tion (Linking)
Reset operation item
Synchronized (linked) and reset information
Trip meter (Trip A)
Average fuel economy on
instrument
cluster display
“Average Fuel Economy History”
(Current) indi- cation on the
center display
Trip meter (Trip A)XX/-*1X/-*1
Average fuel economy on
instrument cluster display-XX
“Average Fuel Economy
History” (Current) indica-
tion on the center display
-XX

226
YARIS SEDAN_OM_OM99S50z_(U)
3-11. Cruise Control
■Cruise main indication (white)
The cruise main indication
(white) is displayed in the
instrument cluster when the
cruise control system is acti-
vated.
■Cruise set indication (white)/indicator light (green)
The cruise set indication (white)
is displayed in the instrument
cluster and the cruise set indi-
cator light (green) turns on
when a cruising speed has
been set.
To activate the system, press t he ON switch. The cruise main in dica-
tion (white) is displayed.
To deactivate the s ystem, press the OFF/CAN switch.
The cruise main indication (white) turns off.
When the ignition is switched OFF, the system status before it was turned off
is maintained. For example, if the ignition is switched OFF with the cruise
control system operable, the system will be operable when the i gnition is
switched ON the next time.
Cruise Main Indicati on (White), Cruise Se t Indication (White)/
Indicator Light (Green)
Activation/Deactivation
WARNING
■ Always turn off the cruise cont rol system when it is not in use
Leaving the cruise control system in an activation-ready state while the
cruise control is not in use is dangerous as the cruise control could unex-
pectedly activate if the activation button is accidentally pres sed, and result
in loss of vehicle control and an accident.

228
YARIS SEDAN_OM_OM99S50z_(U)
3-11. Cruise Control
Follow either of these procedures.
■To increase speed using cruise control switch
Press the RES/ switch and hold it. Your vehicle will accelerate .
Release the switch a t the desired speed.
Press the RES/ switch and release it immediately to adjust the
preset speed. Multiple operations will increase the preset spee d
according to the number of times it is operated.
● Increasing speed with a sing le RES/ switch operation
Instrument cluster display for ve hicle speed indicated in mph:
1 mph (1.6 km/h)
Instrument cluster dis play for vehicle speed indicated in km/h:
1 km/h (0.6 mph)
■To increase speed using accelerator pedal
Depress the accelerator pedal to accelerate to the desired spee d.
Press the SET/ switch a nd release it immediately.
Accelerate if you want to speed up temporarily when the cruise control
is on. Greater speed will not interfere with or change the set speed.
Take your foot off the accelerator to return to the set speed.
Press the SET/ switch and hold it. The vehicle will gradually s low.
Release the switch a t the desired speed.
Press the SET/ switch and release it immediately to adjust the pre-
set speed. Multiple operations will decrease the preset speed accord-
ing to the number of times it is operated.
● Decreasing speed with a single SET/ switch operation
Instrument cluster display for vehicle speed indicated in mph:
1 mph (1.6 km/h)
Instrument cluster display for v ehicle speed indicated in km/h:
1 km/h (0.6 mph)
To Increase Cruising Speed
To Decrease Cruising Speed