0W-16 TOYOTA YARIS 2021 Owners Manual

413
8
YARIS(HB) Owner's Manual_Europe_MK0001_en
8-1. Specifications
Vehicle specifications
■Oil capacity (Drain and refill
[Reference
*])
*: The engine oil capacity is a reference
quantity to be used when changing
the engine oil. Warm up and turn off
the engine, wait more than 5 minutes, and check the oil level on the dip-
stick.
■Engine oil selection
Gasoline Engine ⎯
“Toyota Genuine Motor Oil” is used
in your Toyota vehicle. Toyota rec-
ommends the use of approved
“Toyota Genuine Motor Oil”.
Another motor oil of matching qual-
ity can also be used.
Oil grade:
0W-16:
API grade SN “Resource-Conserv-
ing” or SN PLUS “Resource-Con-
serving” multigrade engine oil
Fuel
Fuel type
When you find these types of fuel label at
the gas station, use only the fuel with one
of the following labels.
EU area:
Unleaded gasoline conforming to Euro-
pean standard EN228 only
Except EU area:
Unleaded gasoline only
Research Octane Number
1KR-FE engine
95 or higher
M15A-FKS engine
95 or higher
Fuel tank capacity
(Reference)
Vehicles without rear wiper
40.0 L (10.6 gal., 8.8 Imp. gal.)
Vehicles with rear wiper
42.0 L (11.1 gal., 9.2 Imp. gal.)
Lubrication system
With filter
1KR-FE engine
2.8 L (3.0 qt., 2.5 Imp. qt.)
M15A-FKS engine
3.4 L (3.6 qt., 3.0 Imp. qt.)
Without fil-
ter
1KR-FE engine
2.5 L (2.6 qt., 2.2 Imp. qt.)
M15A-FKS engine
3.2 L (3.4 qt., 2.8 Imp. qt.)

414
YARIS(HB) Owner's Manual_Europe_MK0001_en
8-1. Specifications
0W-20 and 5W-30:
API grade SL “Energy-Conserving”,
SM “Energy- Conserving”, SN
“Resource-Conserving” or SN
PLUS “Resource-Conserving”; or
ILSAC multigrade engine oil
Preferred
Temperature range anticipated
before next oil change
SAE 0W-16 is filled into your Toyota
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather. If
SAE 0W-16 oil is not available,
SAE 0W-20 oil may be used. How-
ever, it should be replaced with
SAE 0W-16 at the next oil change.
Oil viscosity (0W-16 is explained
here as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which
allows cold startability. Oils with a
lower value before the W allow
for easier starting of the engine
in cold weather.• The 16 in 0W-16 indicates the
viscosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should
use.
API Service Symbol
Top portion: “API SERVICE SN” means
the oil quality designation by American
Petroleum Institute (API).
Center portion: “SAE 0W-16” means
the SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and
environmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specifica-
tion Advisory Committee (ILSAC) Certi-
fication Mark is displayed on the front of
the container.