headlights VAUXHALL MOVANO_B 2016 User Guide
[x] Cancel search | Manufacturer: VAUXHALL, Model Year: 2016, Model line: MOVANO_B, Model: VAUXHALL MOVANO_B 2016Pages: 233
Page 166 of 233

164Vehicle careSidelights
1. Remove protective cover.
2. Detach wiring connector from bulb.
3. Rotate bulb holder anti-clockwise to disengage.
4. Withdraw bulb holder from reflector housing.
5. Detach bulb from bulb holder andrenew the bulb.
6. Insert the bulb holder, engaging the two lugs in the reflectorhousing and rotate clockwise to
secure.
7. Reattach wiring connector to bulb.
8. Replace protective cover.
Adaptive forward lighting
Cornering light
Headlights have separate systems for high beam 1 and low beam 2. The
cornering light 3 is located between
the headlights.
1. Remove protective cover.
2. Detach wiring connector from bulb.
3. Rotate bulb holder anti-clockwise to disengage.
4. Withdraw bulb holder from reflector housing.
Page 192 of 233

190Vehicle care
Lead connection order:1. Connect the red lead to the positive terminal of the booster
battery.
2. Connect the other end of the red lead to the jump start terminal of
the vehicle with the discharged
vehicle battery.
3. Connect the black lead to the negative terminal of the booster
battery.
4. Connect the other end of the black
lead to a vehicle grounding point,
such as the engine block or an
engine mounting bolt. Connect as
far away from the discharged
vehicle battery as possible,
however at least 60 cm.
Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
To start the engine: 1. Start the engine of the vehicle providing the jump start.
2. After 5 minutes, start the other engine. Start attempts should be
made for no longer than
15 seconds at an interval of
1 minute.
3. Allow both engines to idle for approx. 3 minutes with the leads
connected.
4. Switch on electrical consumers (e.g. headlights, heated rear
window) of the vehicle receiving
the jump start.
5. Reverse above sequence exactly when removing leads.Towing
Towing the vehicle
The towing eye is stowed with the vehicle tools 3 174.
Disengage the cover using a suitable
tool and remove.
Screw the towing eye clockwise into
the front towing point and tighten fully using the wheel wrench.
Attach a tow rope - or better still a tow
rod - to the towing eye, never to the
bumper or front suspension units.
Page 228 of 233

226Fuel consumption - CO2-
Emissions ............................... 149
Fuel economy rating (ecoScoring) 92
Fuel for diesel engines ..............148
Fuel gauge ................................... 79 Fuel tank ..................................... 218
Fuse box ............................. 171, 172
Fuses ......................................... 170
G Gauges ......................................... 77
General information ...................150
Glass panel .................................. 37
Glovebox ..................................... 65
Glovebox cooler ......................... 114
Ground clearance .......................122
H Hand brake - see Parking brake. 135
Hazard warning flashers ..............98
Headlight flash ............................. 97
Headlight range adjustment ........97
Headlights ...................... 95, 96, 162
Headlights when driving abroad ..97
Head restraint adjustment .............8
Head restraints ............................ 38
Heated exterior mirrors .................15
Heated mirrors ............................. 34
Heated rear window ...............15, 37
Heating ........................................ 44
Heating and ventilation system . 103High beam ............................. 88, 96
High beam assist ....................89, 96
Hill start assist ........................... 136
Horn ....................................... 14, 73
Hub cap hook ............................. 174
I Identification plate .....................199
Idle speed control .......................118
Ignition switch positions .............117
Immobiliser .................................. 32
Indicators ...................................... 77
Information displays...................... 89
Initial drive information.................... 6 Instrument cluster ........................77
Instrument panel fuse box .........171
Instrument panel illumination .....169
Instrument panel overview ........... 10
Instrument panel storage .............64
Interior care ............................... 193
Interior lighting .............................. 99
Interior lights ........................ 99, 168
Interior mirrors .............................. 34
Interruption of power supply ......134
Introduction .................................... 3
ISOFIX child restraint systems ....63
J Jack ............................................ 174
Journey record.............................. 92
Jump starting ............................. 188K
Keys ............................................. 19
Keys, locks ................................... 19
L
Lane departure warning .......86, 146
Lashing eyes ............................... 67
Light covers, misted...................... 99
Lighting ......................................... 95
Lighting features .........................101
Light switch .................................. 95
Load compartment........................ 21
Load compartment fuse box ......172
Load compartment lighting .........100
Loading information .....................71
Low fuel ....................................... 88
M Malfunction indicator light ............84
Manual adjustment ......................33
Manual anti-dazzle ......................34
Manual door locks ........................21
Manual mode ............................. 132
Manual transmission............. 16, 130
Manual transmission automated ......................... 16, 130
Manual windows ..........................35
Messages ..................................... 90
Mirror adjustment ........................... 8
Mirrors .................................... 33, 34
Misted light covers .......................99