display VOLKSWAGEN JETTA HYBRID 2015 1B / 6.G Owners Manual

Driver side overview

Fig. 5 Driver side overview.
Key to fig. 5:
(1) Instrument cluster:
– Instruments
– Display
– Warning and indicator lights
(2) Headlight switch

– Display Phone main menu or accept telephone calls -
– Audio, navigation

– When the electric drive is activated, the needle moves from /&& to /.
(3) Displays ⇒  Displays. The hybrid power is displayed after the ignition is switched on Starting and stopping the engine.
(4) Reset button for the trip odometer display (trip).
– Push the /./

x Odometer displays
x Time
x Outside temperature
x Selector lever position ⇒  Shifting
x Driving data and menus for different settings ⇒  Volkswagen Information System
x Service reminder display ⇒  Service reminder display
x Hybrid drive information ⇒  Information on the hybrid drive system
x Engine code
Open doors, hood, or luggage compartment lid
The instrument cluster display indicates if any doors, the engine hood, or luggage compartment lid are open once the vehicle has been unlocked, and while the vehicle is in motion. There may also be an audible warning chime. Different models and equipment versions may have different displays.

Key to ⇒ fig. 11 See
A

Selector lever position
The selector lever position is shown both on the side of the selector lever and in the instrument cluster display. The respective gear may also be shown in the instrument cluster display in Drive (D) and
Sport Drive (S), as well as in Tiptronic® mode ⇒  Shifting.
Hybrid drive information
The following information for the hybrid drive is shown in the instrument cluster display:
x Vehicle readiness indicator READY ⇒ Starting and stopping the engine.
x Full electro-mode drive indicator E-MODE ⇒  Information on the hybrid drive system.
x Information and warnings ⇒  Information on the hybrid drive system.
x Electrical driving performance display (E-Powermeter) ⇒  Information on the hybrid drive system.
x Display showing the energy flow between the drive unit (electric motor or combustion engine), the
drive wheels, and the high-voltage battery ⇒  Information on the hybrid drive system.
Engine identification code
Press and hold the /./

If there are multiple warning messages, the symbols are displayed for several seconds in order of importance. The symbols are displayed until the cause has been corrected.
Service reminder display

Menu Function See
MFI Multi-Function Indicator (MFI) in-
formation.
Energy
Flow
Shows the current energy flow to
the hybrid drive.
Audio
Station indicator in radio mode.
Track display in CD mode.
Track display in media mode.
⇒ Booklet Radio or
⇒ Booklet Navigation
system
Navigation
Information displays on the navi-
gation system (if equipped):
When destination guidance is ac-
tive, turn arrows and proximity
bars are shown. The illustration is
similar to the symbol display in the
navigation system.
If destination guidance is inactive,
driving direction (compass func-
tion) and the current street name
are displayed.
⇒ Booklet Navigation
system
Phone Information and settings of the
mobile phone package.
⇒ Booklet Mobile
Phone Package
Assistants
Turn the Blind Spot monitor, Rear
Traffic Alert, and Adaptive Front
Lighting System (AFS) on and off
(if equipped).


Vehicle
status
Current warning and information
messages.
This menu item is only displayed
when warning or information mes-
sages are available. The number
of available messages is shown in
the display. Example: 1/1 or 2/2.

Display Function
Travel time Driving time in hours (h) and minutes (min) corre-
sponding to trip memories 1 and 2 (toggle).
Consumption
--.- mpg
Current fuel consumption in miles per gallon
(l/100 km) while driving.
When units are set to miles, dashes appear instead of
a number when the engine is running and the vehicle
is standing still.
When units are set to kilometers, the display shows
liters consumed per hour when the engine is running
and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consump-
tion
--.- mpg
Average fuel consumption in miles per gallon
(l/100 km) on trips per trip memories 1 and 2 (toggle)
is displayed once the vehicle has been driven about
330 feet (100 m). Until then, dashes appear instead
of a number. The value displayed is updated every
5 seconds.
Av. consump-
tion
--.- l/100 km
Range  -- mi Estimated distance in miles (km) that the vehicle can
go with the fuel left in the tank the way you are cur-
rently driving. Takes account of the current fuel con-
sumption, among other things. Range  -- km
Route -- mi Distance driven in miles (km) per trip memories 1 and
2 (toggle). Route -- km
Average speed
-- mph
Average speed on trips per trip memories 1 and 2
(toggle). Displayed once the vehicle has been driven
about 300 feet (100 m). Until then, dashes may ap-
pear instead of a number. The value displayed is
updated every 5 seconds.
Average speed
-- km/h
-- mph
Digital display of the current vehicle speed.
-- km/h

Display Function
Oil tempera-
ture ---°F
Current engine oil temperature.
Oil tempera-
ture ---°C
Speed warning
--- mph When the set speed (from 20–155 mph or 30–
250 km/h) is exceeded, an acoustic warning sounds
and a visual message may also appear in the instru-
ment cluster display. Speed warning
--- km/h

Switching between the displays
x Use the arrow up and down buttons (* and +) on the multi-function steering wheel.
Storing speed for the speed warning
x Select the Speed warning display.
x Press the /+ button to save the current speed and to activate the warning.
x If the speed is not right, press buttons * or + on the multi-function steering wheel to set a differ-ent speed within about 5 seconds. Then press the /+ button a second time or just wait a few seconds. The speed is saved and the warning is activated.
x To deactivate, toggle to Speed warning and press the /+ button. The set speed is deleted.
Manually erasing trip memory 1 or 2
x Select the trip memory to be erased.
x Press the /+ button for about 2 seconds.
Enabling and disabling displays
Use the Settings menu, submenu MFI data to enable displays you want to be available under the MFI menu in the instrument cluster display. The units in which data is displayed can also be changed
⇒  Settings menu.
Settings menu

Settings menu Function
Language Set the language for messages in the display and
navigation system.
MFI data Select the features you want to have displayed in the
MFI menu in the instrument cluster display
Convenience Convenience function settings
Lights & Vi-
sion Vehicle lighting settings
Time
Set hours and minutes for the instrument cluster clock
and the Radio & Navigation System clock. The time
can be displayed in 12 or 24 hour format, and can
also be set to daylight savings time.
Snow tires
Set up a visual and acoustic speed warning. Use the
feature only when winter tires are installed that have
a speed rating less than top vehicle speed.
Units
Set the units in which temperature, fuel consumption,
and distances should be displayed (for example,
whether to show distance driven in miles or kilome-
ters).
Service View the service reminder display
Factory set-
ting
Reset the functions in the Settings menu back to
the factory settings.