alarm YAMAHA FX SVHO 2019 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2019, Model line: FX SVHO, Model: YAMAHA FX SVHO 2019Pages: 116, PDF Size: 12.33 MB
Page 29 of 116
Description
23
1
2
1
10
111213
20
1918
17
1614
15
2
8
394
567
1Handlebar
2Rearview mirror
3RiDE lever (page 30)
4Start switch (page 26)
5Engine shut-off switch (page 26)
6Clip (page 26)
7Engine shut-off cord (lanyard) (page 26)
8Multifunction information center (page 40)
9Throttle lever (page 27)
10“SPEED CONTROL” up switch (page 34,
35, 38)
11“SPEED CONTROL” down switch (page 34,
35, 38)12“SET” switch (page 38)
13“NO-WAKE MODE” switch (page 35)
14Tilt lever (page 28)
15Glove compartment (page 53)
16“ALARM MUTE” button (page 41)
17“MENU SCROLL” button (page 41)
18Engine stop switch (page 26)
19“TRIM/T.D.E.” down switch (page 32, 34)
20“TRIM/T.D.E.” up switch (page 32, 34)
UF3X70E0.book Page 23 Friday, August 24, 2018 9:23 AM
Page 47 of 116
Instrument operation
41
EJU45121Operation buttons
This model is equipped with operation but-
tons that can be used in addition to touching
the multifunction information center.
“MENU SCROLL” button
Each time this button is pushed, the multi-
function information center switches in the
following order.
Home screen → Information screen (“Trip In-
fo”) → Information screen (“Fuel Info”) →
Home screen
“ALARM MUTE” button
Push this button to stop the buzzer when a
warning is activated. If this button is pushed
again while the warning is still activated, the
buzzer will start sounding again.
TIP:
The operation sounds cannot be turned off.
If the “ALARM MUTE” button was pushed
to stop the buzzer, the buzzer will start
sounding again after 5 minutes.
EJU45131Touch screen
The touch operations are enabled only for the
screen tab bar, the items and sliders that are
shown in the center display, and the warningsymbol in the warning bar that is displayed
when a warning is activated.
Screen tab bar
When each symbol is tapped, the watercraft
information, function settings, and other in-
formation are shown in the center display.
(See page 42 for information on each screen.)
Center display
The center display shows the watercraft in-
formation, function settings, and other infor-
mation according to the symbol on the
screen tab bar that is tapped.
Warning bar
The warning bar is shown instead of the ta-
chometer value display only when an error or
malfunction is detected.
When the warning symbol is tapped, the
warning description, error code, and other in-
formation are shown in the center display.
(See page 46 for information about the warn-
ing descriptions.)
1“MENU SCROLL” button
2“ALARM MUTE” button
12
1Screen tab bar
2Center display
1Warning bar
0
N13.6Vx100
RPM
100%
MPH
1
2
1
UF3X70E0.book Page 41 Friday, August 24, 2018 9:23 AM
Page 53 of 116
Instrument operation
47
start the engine again, or push the “ALARM
MUTE” button.
TIP:
If the “ALARM MUTE” button was pushed to
stop the buzzer, the buzzer will start sound-
ing again after 5 minutes.
Fuel level warning
If the amount of remaining fuel is less than
10%, the percentage display of the fuel level
meter changes to “Low”, and the buzzer
sounds intermittently.
If the fuel level warning is activated, refill the
fuel tank as soon as possible. (See page 57
for information on filling the fuel tank.)
Battery voltage warning
If the battery voltage is less than 12 volts or
more than 18 volts when the engine is notrunning, the voltage display of the voltmeter
blinks.
If the battery voltage warning is activated,
have the watercraft serviced by a Yamaha
dealer as soon as possible.
Check engine warning “ ”
If a sensor malfunction or a short circuit is de-
tected, the warning bar is shown instead of
the tachometer value display, “ ” is shown,
and the buzzer sounds intermittently.
If the check engine warning is activated, im-
mediately reduce the engine speed, return to
shore, and have a Yamaha dealer check the
engine.
TIP:
Tap “ ” to display a description of the
warning in the center display.
Engine overheat warning “ ”
If the engine temperature rises significantly,
the warning bar is shown instead of the ta-
chometer value display, “ ” and “ ” are
shown, and the buzzer sounds continuously.
1“ALARM MUTE” button
1
Low0
F13.6Vx100
RPM
MPH
0
F10.8Vx100
RPM
100%
MPH
UF3X70E0.book Page 47 Friday, August 24, 2018 9:23 AM