tightening YAMAHA NMAX 155 2021 Owners Manual

Periodic maintenance an d a djustment
9-32
9
EAU67320
Replacin g a rear turn si gnal
lig ht bul b1. Open the seat. (See page 6-17.)
2. Remove the grab bar by removing
the bolts.
3. Remove the taillight cover by re- moving the screws. 4. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
5. Remove the burnt-out bulb by pulling it out. 6. Insert a new bulb into the socket.
7. Install the socket (together with
the bulb) by turning it clockwise.
8. Install the taillight cover by install- ing the screws.
9. Install the grab bar by installing the bolts, and then tightening them to
the specified torque.1. Grab bar
2. Bolt1
2
1. Taillight cover
2. Screw
1. Turn signal light bulb socket1 2
1
1. Turn signal light bulb
1
UBBDE0E0.book Page 32 Wednesday, June 2, 2021 2:57 PM