tyre pressure YAMAHA WR 450F 2016 Owners Manual

CLUTCH
6-41
EAS2GC1265
CLUTCH
Removing the clutch
OrderPart name Q’tyRemarks
Engine oil Drain.
Refer to “CHANGING THE ENGINE OIL” on
page 3-17.
Brake pedal Refer to “ENGINE REMOVAL” on page 6-1.
1 Clutch cable 1 Disconnect.
2 Clutch cover 1
3 O-ring 1
4 Clutch spring 6
5 Pressure plate 1
6 Push rod 1 1
7 Circlip 1
8Washer 1
9 Bearing 1
10 Ball 1
11 Push rod 2 1
12 Friction plate 1 3
13 Clutch plate 1 4 Thickness:2.0 mm (0.079 in)
LS
New
New
New
2
3
4
5
78 9
610 11
12
12
20
1
14
16
13
15 19
18
17
T.R.
T.R.
T.R.
T.R.
LT
(2) (5) (6)

THROTTLE BODY
8-7
EAS2GC1351
THROTTLE BODY
Removing the throttle body
OrderPart name Q’tyRemarks
Seat Refer to “GENERAL CHASSIS” on page 5-1.
Side cover (left/right) Refer to “GENERAL CHASSIS” on page 5-1.
Air scoop (left/right) Refer to “GENERAL CHASSIS” on page 5-1.
Fuel tank Refer to “FUEL TANK” on page 8-1.
ECU Refer to “ENGINE REMOVAL” on page 6-1.
Ignition coil Refer to “ENGINE REMOVAL” on page 6-1.
1 Intake air temperature sensor coupler 1 Disconnect.
2 Breather hose 3 1
3 Air filter case 1
4 Fuel injector coupler 1 Disconnect.
5 Intake air pressure sensor coupler 1 Disconnect.
6 Throttle position sensor coupler 1 Disconnect.
7 Throttle cable cover 1
8 Throttle cable 2
3
1
2
7
11
12
10
9
4
8
6
5
3.5 Nm (0.35 m kgf, 2.5 ft Ibf)T.R.
3.5 Nm (0.35 m kgf, 2.5 ft Ibf)T.R.
7 Nm (0.7 m kgf, 5.1 ft Ibf)T.R.
3.0 Nm (0.30 m kgf, 2.2 ft Ibf)T.R.
10 Nm (1.0 m kgf, 7.2 ft Ibf)T.R.

THROTTLE BODY
8-9
Removing the injector
OrderPart name Q’tyRemarks
1 Fuel inlet pipe 1
2Injector 1
3 Gaskets 1
4 Throttle position sensor 1
5 Intake air pressure sensor 1
For installation, reverse the removal proce-
dure.
1
2
(2)
(2) 5
4 3
T.R.3.4 Nm (0.34 mlbf)
kgf, 2.5 ft
T.R.5 Nm (0.5 mlbf)
kgf, 3.6 ft
T.R.3.4 Nm (0.34 mlbf)
kgf, 2.5 ft