clock YAMAHA XTZ125 2008 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2008, Model line: XTZ125, Model: YAMAHA XTZ125 2008Pages: 97, PDF Size: 3.32 MB
Page 23 of 97
3-8
3-8
Fuel tank cap
Be sure the cap is properly installed and locked in
place before riding the motorcycle.
TO OPEN:
Insert the key and turn it 1/2 turn counterclockwise.
The lock will be released and the cap can be opened.
TO CLOSE:
Push the tank cap into position with the key inserted. To
remove the key, turn it clockwise to the original position.
WARNING:
Fuel tank cap
Be sure the cap is properly installed and locked in
place before riding the motorcycle.
TO OPEN:
Insert the key and turn it 1/2 turn counterclockwise.
The lock will be released and the cap can be opened.
TO CLOSE:
Push the tank cap into position with the key inserted. To
remove the key, turn it clockwise to the original position.
WARNING:
Page 26 of 97
3-11
3-11
# 4
The steering is locked when the main switch is turned to
“LOCK”. To lock the steering, turn the handlebars all the
way to the left. With the key at “OFF” position, push it into
the main switch and release it, turn it counterclockwise to
“LOCK”, and remove the key. To release the lock, turn the
key to “OFF”.
WARNING:
Never turn the key to “LOCK” position when the
motorcycle is moving.
Steering lock
WARNING:
# 4
The steering is locked when the main switch is turned to
“LOCK”. To lock the steering, turn the handlebars all the
way to the left. With the key at “OFF” position, push it into
the main switch and release it, turn it counterclockwise to
“LOCK”, and remove the key. To release the lock, turn the
key to “OFF”.
WARNING:
Never turn the key to “LOCK” position when the
motorcycle is moving.
Steering lock
WARNING:
Page 28 of 97
3-13
3-13
" # #
A Side coversInsert the key and turn it 1/4 clockwise. Pull the cover to
release the pins.
To reinstall, reverse the removal procedures.
Remove the screw and then pull the cover to release the
pins
To reinstall, reverse the removal procedures.
!
2 # #
A
" # #
A Side coversInsert the key and turn it 1/4 clockwise. Pull the cover to
release the pins.
To reinstall, reverse the removal procedures.
Remove the screw and then pull the cover to release the
pins
To reinstall, reverse the removal procedures.
!
2 # #
A
Page 65 of 97
6-18
6-18For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
1. Pedal height.
a. Loosen the locknut.
b. By turning the adjuster clockwise or counterclockwise
adjust the brake pedal position so that its top end is
approximatelly 2 mm (0.08 in) below the footrest top
end.
c. Tighten the locknut.
Rear brake adjustment
1. Adjusting nut 2. locknut
a. Pedal height: 2 mm( 0.08 in)
WARNING:
For brake pedal adjustment, be sure to proceed as
follows (it is advisable to have a Yamaha dealer make
this adjustment.)
1. Pedal height.
a. Loosen the locknut.
b. By turning the adjuster clockwise or counterclockwise adjust the brake pedal position so that its top end is
approximatelly 2 mm (0.08 in) below the footrest top
end.
c. Tighten the locknut.
Rear brake adjustment
1. Adjusting nut 2. locknut
a. Pedal height: 2 mm( 0.08 in)
WARNING:
Page 66 of 97
6-19
6-19
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING:
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING: