clock YAMAHA XV125S 2000 Owners Manual

EAU00027
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
3-1
EAU00028Main switch
The main switch controls the igni-
tion and lighting systems. Its oper-
ation is described below.
EAU00036ON
Electrical circuits are switched on.
The engine can be started. The key
cannot be removed in this position.
EAU00038OFF
All electrical circuits are switched
off. The key can be removed in this
position.
EAU00054P (Parking)
The taillight and auxiliary light
come on but all other circuits are
off. With the key at “OFF”, push it
into the main switch, turn it coun-
terclockwise to “P”, and remove it.
To cancel the parking, turn the key
clockwise.
EAU00056Indicator lightsEAU00063High beam indicator light “&”
This indicator comes on when the
headlight high beam is used.
EAU00061Neutral indicator light “N”
This indicator comes on when the
transmission is in neutral.
EAU00057Turn indicator light “5”
This indicator flashes when the
turn switch is moved to the left or
right.
1. High beam indicator light “&”
2. Neutral indicator light “N”
3. Turn indicator light “5”
ONOFF
P
3 2 1
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 13

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
3-5
EAU00162Rear brake pedal
The rear brake pedal is on the right
side of the motorcycle. Press down
on the brake pedal to apply the
rear brake.
EAU00167Fuel tank cap
To open
Insert the key and turn it 1/4 turn
clockwise. The lock will be released
and the cap can be opened.
To close
Push the tank cap into position
with the key inserted. To remove
the key, turn it counterclockwise to
the original position.
1. Open
NOTE:
This tank cap cannot be closed
unless the key is in the lock. The
key cannot be removed if the cap is
not locked properly.
EW000023
w
Be sure the cap is properly
installed and locked in place
before riding the motorcycle.
1
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 17

3-8
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9PRI
This indicates prime. With the lever
in this position, fuel flows whether
the engine is running or not. If the
fuel tank is completely empty, refill
the tank and move the lever to
“PRI” to prime the carburetor.
Move the lever to “ON” after start-
ing the engine.
1. Arrow mark pointing to “PRI”
EAU02976Starter (choke) “1”
Starting a cold engine requires a
richer air-fuel mixture. A separate
starter circuit supplies this mixture.
Move in direction ato turn on the
starter (choke).
Move in direction bto turn off the
starter (choke).
1. Starter (choke) “1”
EAU02934Steering lock
To lock the steering
Turn the handlebars all the way to
the right and open the steering
lock cover.
Insert the key and turn it 1/8 turn
counterclockwise. Then, push the
key in while turning the handlebars
slightly to the left and turn the key
1/8 turn clockwise.
Check that the steering is locked,
remove the key and close the lock
cover.
To unlock the steering
Insert the key, push it in and turn it
1/8 turn counterclockwise so that it
moves out. Then, release and
remove the key.
1. Steering lock
1
1a
b1
PRI
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 20

1
2
3
4
5
6
7
8
9
6-34
PERIODIC MAINTENANCE AND MINOR REPAIR
3. Turn the bulb holder counter-
clockwise to remove it and
remove the defective bulb.
EW000119
w
Keep flammable products and your
hands away from a bulb while it is
on, as it is hot. Do not touch a bulb
until it cools down.
4. Put a new bulb into position
and secure it in place with the
bulb holder.
1. Bulb holder
EC000105
cC
Avoid touching the glass part of a
bulb. Keep it free from oil; other-
wise, the transparency of the
glass, life of the bulb, and lumi-
nous flux will be adversely affect-
ed. If oil gets on a bulb, thoroughly
clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install the bulb cover, connec-
tors and headlight unit.
Ask a Yamaha dealer to adjust
the headlight beam if neces-
sary.
1. Don’t touch
1
1
1
EAU03010Turn signal light bulb
replacement
1. Remove the screws and the
lens.
1. Screw (´2)
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 65

6-35
1
2
3
4
5
6
7
8
9
1
2. Remove the defective bulb by
pushing it inward and turning
it counterclockwise.
3. Install a new bulb by pushing
it inward and turning it clock-
wise.
4. Install the lense and tighten
the screws.
EC000108
cC
Do not over-tighten the screws as
the lens may break.
1. Bulb
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2. Remove the defective bulb by
pushing it inward and turning
it counterclockwise.
3. Install a new bulb by pushing
it inward and turning it clock-
wise.
4. Install the lens and tighten the
screws.
1. Bulb
1
EAU01623Taillight bulb replacement
1. Remove the screws and the
lense.
1. Screw (´2)
5AJ-9-E3 (XV125S)<3.1E> 4/5/0 5:01 PM Page 66