lock YAMAHA YBR125 2007 Owners Manual

ROAD SAFETY TIPS....................................... 1-1
DESCRIPTION................................................ 2-1
Left view ........................................................ 2-1
Right view ...................................................... 2-2
Controls/Instruments................................... 2-3
INSTRUMENT AND CONTROL
FUNCTIONS.................................................... 3-1
Main switch cum steering lock ..................... 3-1
Speedometer................................................ 3-2
Fuel gauge .................................................... 3-2
Indicator lights .............................................. 3-2
Handlebar switches ..................................... 3-3
Clutch lever ................................................... 3-3
Shift pedal ..................................................... 3-4
Front brake lever ........................................... 3-4
Rear brake pedal .......................................... 3-4
Fuel tank cap ................................................ 3-5
Fuel............................................................... 3-5
Fuel cock ....................................................... 3-6
Starter Lever .................................................. 3-7
Kick starter .................................................... 3-7
Seat............................................................... 3-8Storage compartment .................................. 3-9
Rear shock absorber adjustment ............... 3-9
Handle Seat, Lifting Handle, stay Lock .......3-10
PRE-OPERATION CHECKS ........................... 4-1
Pre-operation check list ............................... 4-1
OPERATION AND IMPORTANT RIDING
POINTS............................................................ 5-1
Starting and warming up a
cold engine ................................................... 5-1
Starting a warm engine ................................ 5-2
Shifting.......................................................... 5-2
Tips for reducing fuel consumption ............. 5-3
Running-in.................................................... 5-3
Parking.......................................................... 5-4
PERIODIC MAINTENANCE AND MINOR
REPAIR ............................................................ 6-1
Tool kit ........................................................... 6-1
Preventive maintenance schedule .............. 6-3
Panel removal and installation .................... 6-5
Spark plug inspection .................................. 6-7
Engine OIl ..................................................... 6-8
1
4
23
65
TABLE OF CONTENTS
Libero5TS8.pmd11/3/2006, 8:50 PM 1

DESCRIPTION
2-1
Left view
6. Toolkit (page 6-1)
7. Handle Seat(page 3-10)
8. Drive chain free play check window (page 6-19)
9. Side panel (L.H.) lock (page 6-5)
10. Shift pedal (page 3-4) 1. Fuel cock (page 3-6)
2. Starter Lever (page 3-7)
3. Fuse(page 6-26)
4. Battery(page 6-24)
5. Storage Compartment(page 3-9)
STANDARD VEHICLE
134
2
8
9107 56
Libero5TS8.pmd11/3/2006, 8:50 PM 4

17. Clutch Lever (page 3-3, 6-16)
18. Left Hand Switch (page 3-3)
19. Speedometer(page 3-2)
20. Main switch Cum Steering Lock (Page 3-1)
21. Fuel Gauge (page 3-2)22. Front Brake Lever (page 3-4, 6-16)
23. Throttle Grip(page6-12)
24. Fuel Tank Cap (page 3-5)
25. Turn Indicator Switch (page 3-2)Controls / InstrumentsDESCRIPTION
STANDARD VEHICLE
2-3
24 17181920
21
23
25
22
Libero5TS8.pmd11/3/2006, 8:50 PM 6

Main switch cum steering
lockThe main switch controls the ignition
and lighting systems. Its operation is
described below.
ON:
Electrical circuits are switched on.
The engine can be started. The key
cannot be removed in this position.
OFF:
Engine will be shut off. All electrical
circuits are switched off. The key can
be removed in this position.
1. Push
2. Release
3. TurnLOCK:
The steering is locked in this position
and all electrical circuits are switched
off.
The key can be removed in this
position.
To lock the steering, turn the handle-
bars all the way to the left or right. With
the key at "OFF", push it into the main
switch and release it, turn it counter-
clockwise to "LOCK" and remove it. To
release the lock, turn the key to
"OFF".
INSTRUMENT AND CONTROL FUNCTIONS
WARNING
Never turn the key to "LOCK" when
the Motorcycle is moving.
3-1

This tank cap cannot be closed
unless the key is in the lock. The key
cannot be removed if the cap is not
locked properly.
Be sure the cap is properly
installed and locked in place
before riding the Motorcycle.WARNING
1. Filler tube
2. Fuel levelFuelMake sure there is sufficient fuel in the
tank. Fill the fuel tank to the bottom of
the filler tube as shown in the
illustration.
Do not overfill the fuel tank. Avoid
spilling fuel on the hot engine. Do
not fill the fuel tank above the
bottom of the filler tube to avoid
Spillage
1. OpenFuel tank capTO OPEN:
Insert the key and turn it 1/4 turn
clockwise. The lock will be released
and the cap can be opened.
TO CLOSE:
Push the tank cap into position with
the key inserted. To remove the key,
turn it counterclockwise to the
original position.
Ensure the arrow on fuel tank is
towards the Front of the bike when
inserting Fuel Tank Cap in Fuel
Tank.
INSTRUMENT AND CONTROL FUNCTIONS
NOTE :
3-5
WARNING
WARNING
1
2
1
1. Arrow
1¿

INSTRUMENT AND CONTROL FUNCTIONS
3-10 1. HandleSeat
1
1. Stay LockStay LockFor mounting Helmet Lock

PERIODIC MAINTENANCE AND MINOR REPAIR
6-4
PREVENTIVE MAINTENANCE SCHEDULE
EVERY 10,000 KM EVERY 10,000 KM
17
Check operation/oil leakage.
REAR SHOCK
ABSORBER
Replace if necessary.
STEERING BEARING
FRONT FORKS 16 15
Check operation/oil leakage. Repair if necessary. Check Bearing assembly for looseness;
Correct if necessary.
Relace oil Repack grease
S.NO ITEMOPERATION
DRIVE CHAIN
NUTS, BOLTS AND
FASTENERS
CENTERSTAND AND
SIDE STAND
Check Chain slack, alignment. Adjust if necessary.
Clean periodically & lubricate.
Check all Chassis fittings and fasteners for looseness.
Tighten as per specification.
Check operation and lubricate if necessary.
Check electrolyte level and top it up if necessary.
Check specific gravity and charge if required.
Check breather pipe for blockage and routing.
CONTROL CABLES
-THROTTLE
-CLUTCH
-FRONT BRAKE 18
19
20
21
BATTERY
22
Readjust or replace as required. Check operation, free play, cable damage
EVERY MONTH
IT IS RECOMMENDED THAT THE ABOVE BE SERVICED BY AUTHORIZED DEALER.
SERVICE MORE FREQUENTLY WHEN THE VEHICLE IS DRIVEN IN DUSTY AREAS.YAMAHA*
EVERY 10,000 KMS
WHEEL BEARING 14
Check Bearing assembly for looseness, damage;
Replace if necessary.
Repack grease
30 Days OR
500-700 KmAFTER EVERY DAYS OR KMS
90 Days OR
2500-2700 Km180 Days OR
4500-5000 KmAFTER
EVERY
2000 KMS

1. Panel APanel removal and installa-
tionThe panels illustrated need to be
removed to perform some of the
maintenance described in this
manual. Refer to this section each
time a panel has to be removed or
reinstalled.
2. Panel BPERIODIC MAINTENANCE AND MINOR REPAIR
6-51. Lug
2. Panel A
3. Lug
Removal of Panel AUnlock the panel.
Pull the lug 1 towards you to remove
it from the fuel tank.
Slide the panel A towards the Front
of the motorcycle for removing the
lug 3 to free the panel.
2
3 1
2
1

PERIODIC MAINTENANCE AND MINOR REPAIR
6-6 1. Lug
2. Lug
Removal of Panel BLoosen screw completely and follow
the same procedure as for
removing panel A.
1. Lug
2. LugInstallation of Panel ASlide the panel towards the Rear of
the motorcycle for inserting the lug
2 in the slot given in the frame.
Insert and push the lug 1 in the
fuel tank ensuring proper seating.
After proper seating of the panel A,
lock it.
1. Lug.
2. LugInstallation of Panel BFollow the same procedure as given
for installation of panel A and tighten
the screw for locking.
2 1
1 2
1
2
1

1. Air filter case cover
2. Screw(3 Nos)Air filterThe air filter should be cleaned at
the specified intervals. It should be
cleaned more frequently when riding
in unusually wet or dusty areas.
1. Remove panel B. (See page 6-5for removal and installation
procedures.)
2. Remove the air filter case fitting screws and the air filter case
cover.
1. Air filter element
2. Lockable SpringWire
PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
3. Remove the air filter from thecase.
4. Unlock the spring wire.
1. Air filter element
2. Frame6. Apply recommended oil to the entire surface of the each element
and squeeze out the excess oil.
They should be wet but not
dripping.
Recommended oil:
20W40 Type SG
2 1
2
1 2
2
1