key YAMAHA YBR250 2007 User Guide

5-4
5
OPERATION AND IMPORTANT RIDING POINTS
EAU17212
ParkingWhen parking, stop the engine, and then
remove the key from the main switch.
EWA10310
l
l l
l
l
Since the engine and exhaust
system can become very hot,
park in a place where
pedestrians or children are not
likely to touch them.
l
l l
l
l
Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn.
ECA10380
Never park in an area where there are
fire hazards such as grass or other
flammable materials.
cap 5.pmd 24/1/2007, 14:37
4

6-26
6
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23624
Replacing the fusesThe main fuse and the fuse box, which
contains the fuses for the individual
circuits, are located under the seat. (See
page 3-9.)
20
1
2
1. Main fuse
2. Spare fuse1. Fuse box cover
2. Headlight fuse
3. Signaling system fuse
4. Fuel injection and ignition fuse
5. Display backup fuse
6. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off the electrical circuit in question.
2. Remove the blown fuse, and then install a new fuse of the specified
amperage.Specified fuses:
Main fuse:20.0 A
Headlight fuse: 10.0 A
Signaling system fuse:
10.0 A
Ignition and fuel injection fuse: 10.0 A
Backup fuse: 10.0 A
Spare fuses:
10.0 A and 20.0 A
ECA10640
Do not use a fuse of a higher
amperage rating than recommended
to avoid causing extensive damage
to the electrical system and possibly
a fire.3. Turn the key to “ON” and turn on
the electrical circuit in question to check if the device operates.
4. If the fuse immediately blows again, have a Yamaha dealer check
the electrical system.
cap 6.pmd 24/1/2007, 14:38
26

9-1
CONSUMER INFORMATION
9
EAU26351
Identification numbersRecord the key identification number,
vehicle identification number and model
label information in the spaces provided
below for assistance when ordering
spare parts from a Yamaha dealer or for
reference in case the vehicle is stolen.
VEHICLE IDENTIFICATION NUMBER:MODEL LABEL INFORMATION:
EAU26400
Vehicle identification number
12
1. Vehicle identification number
2. Model yearThe vehicle identification number is
stamped into the steering head pipe.
Record this number in the space
provided.The vehicle identification number is used
to identify your motorcycle and may be
used to register your motorcycle with
the licensing authority in your area.
EAU33941
Model label1. Model labelThe model label is affixed to the frame
under the passenger seat. (See page
3-9.) Record the information on this label
in the space provided. This information
will be needed when ordering spare parts
from a Yamaha dealer.
cap 9.pmd
24/1/2007, 14:38
1