Acura Integra 2001 Owner's Manual
Integra 2001
Acura
Acura
https://www.carmanualsonline.info/img/32/9706/w960_9706-0.png
Acura Integra 2001 Owner's Manual
Trending: run flat, height adjustment, battery capacity, width, service, brake pads, diagram
Page 171 of 285
# : See information on maintenance and emissions warranty, last
column, page 163.
* 1: See timing belt on page 197 to determine need for replacement.
* 2: Thereafter replace engine coolant every 60,000 mi/96,000 km/5 yrs.
NOTE:
Check engine oil and coolant at each fuel stop.
Check and adjust valve clearance, cold engine, only if noisy.
Maintenanc
e
Page 172 of 285
Require
d Maintenanc e Recor d (fo r Norma l an d Sever e Schedules )
You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 164) or severe conditions (page 166). Keep the receipts for all work done on your vehicle.
CONTINUED
Maintenanc e
Page 173 of 285
Require
d Maintenanc e Recor d (fo r Norma l an d Sever e Schedules )
Maintenanc e
Page 174 of 285
Owne
r Maintenanc e Check s
You should check the following items at the specified intervals. If
you are unsure of how to perform any check, turn to the page given. Engine oil level — Check every
time you fill the fuel tank. See page 127. Engine coolant level — Check the
radiator reserve tank every time
you fill the fuel tank. See page 128. Windshield washer fluid — Check
the level in the reservoir monthly.If weather conditions cause you to
use the washers frequently, check
the reservoir each time you stop
for fuel. See page 182. Automatic transmission — Check
the fluid level monthly. See page
183.
Brakes — Check the fluid level
monthly. See page 185. Tires — Check the tire pressure
monthly. Examine the tread for
wear and foreign objects. See page
198.
Lights — Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
turn signals, brake lights, and
license plate lights monthly. See
page 205.
Maintenance
Page 175 of 285
Flui
d Location s
Maintenanc e
AUTOMATI
C
TRANSMISSIO N
FLUI D DIPSTIC K
(Yello w loop )
ENGIN E COOLAN T
RESERVOI R
BRAK
E FLUI D
(Gra y cap )
(5-spee d Manua l
Transmissio n only )
CLUTC H FLUI D
(Gra y cap )
ENGIN E OI L
FIL L CA P
(Blac k cap )
WASHE R FLUI D
(Blu e cap )
POWE R STEERIN G
FLUI D (Re d cap )
ENGIN E OI L DIPSTIC K
(Orang e loop )
RADIATO
R CA P
Page 176 of 285

Engin
e Oi l
Addin g Oi l
To add oil, unscrew and remove the engine oil fill cap on top of the valve
cover. Pour in the oil, and install the engine oil fill cap. Tighten it securely.
Wait a few minutes and recheck the oil level. Do not fill above the upper
mark; you could damage the engine. Recommende
d Oi l
Oil is a major contributor to your
engine's performance and longevity.
Always use a premium-grade deter- gent oil. It is highly recommended
that you use Honda Motor Oil in
your vehicle for as long as you own it.
You can determine an oil's SAE
viscosity and Service Classification from the API Service label on the oil container.
A fuel-efficient oil is recommended for your Acura. This is shown on the
API Service label by the words "Energy Conserving." This oil is
formulated to help your engine use
less fuel. The API Service label also tells you
the service classification of the oil.
Always use an oil that is labeled "API Service SJ." This service rating may
include other classifications, such as CD. These additional classifications
are not a problem, as long as the
label also carries the SJ classification.
API SERVIC E LABE L
CONTINUED
Maintenanc e
ENGIN
E OI L FIL L CA P
Page 177 of 285
Engin
e Oi l
The oil container may also display the API Certification seal. Make sureit says "For Gasoline Engines."
API CERTIFICATIO N SEA L
The SAE numbers tell you the oil's
viscosity or weight. Select the oil for
your car according to this chart. An oil with a viscosity of 5W-30 is
preferred for improved fuel economyand year-round protection in your
Acura. You may use a 10W-30 oil if the temperature in your area never
goes below 20°F (— 7°C).
Maintenanc e Ambien
t Temperatur e
Page 178 of 285

Engin
e Oi l
Syntheti c Oi l
You may use a synthetic motor oil if it meets the same requirements
given for conventional motor oil:energy conserving, a service
classification of SJ, and the proper
weight as shown on the chart. When using synthetic oil, you must follow
the oil and filter change intervalsgiven in the maintenance schedule. Additive
s
Your Acura does not need any oil additives. Purchasing additives for
the engine or transmission will not
increase your car's performance or
longevity. It only increases the cost of operating your car. Changin
g th e Oi l an d Filte r
Always change the oil and filter according to the time and distance (miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami- nants that can damage your engine if
they are not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the car. The car should
be raised on a service station-type
hydraulic lift for this service. Unless
you have the knowledge and proper equipment, you should have this
maintenance done by a skilled
mechanic.
CONTINUED
Maintenanc e
Page 179 of 285
Engin
e Oi l
1. Run the engine until it reaches normal operating temperature,
then shut it off.
OIL DRAI N BOL T
WASHER
2. Open the hood and remove the engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil into an appropriate container.
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your Acura dealer) is required to remove the
filter.
4. Install a new oil filter according to
instructions that come with it.
Maintenanc e OI
L FILTE R
Page 180 of 285

Engin
e Oi l
5. Put a new washer on the drain bolt, then reinstall the drain bolt.
Tighten it to:33 Ibf.ft (44 N.m , 4.5 kgf.m)
6. Refil
l the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):
(SE,
LS,
GS)
4.0 US qt (3.8 ,3.3 Imp qt)
(GS-R,Type-R)
4.2 US qt (4.0 , 3.5 Imp qt)
7. Replac
e the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out within
five seconds. If it does not, turn off
the engine and reinspect your
work.
8. Let the engine run for several minutes and check the drain boltand oil filter for leaks.
9. Turn off the engine, let it sit for several minutes, then check the oil
level. If necessary, add oil to bring
the level to the upper mark on the
dipstick.
Improper disposal of engine oil can be
harmful to the environment. If you
change your own oil, please dispose ofthe used oil properly. Put it in a sealed
container and take it to a recycling center. Do not discard it in a trash bin
or dump it on the ground.
Maintenance
NOTIC
E
Trending: service, horn, fold seats, transmission oil, alternator belt, winter tires, coolant