change wheel Alfa Romeo 166 2007 Owner handbook (in English)

158IN THE EVENT
OF A PUNCTURE
Wheel changing and cor-
rect use of the jack and
spare wheel call for some precau-
tions as mentioned below.
Signal the presence of the station-
ary vehicle according to current
regulations: hazard warning lights,
reflecting triangle, etc.
Any passengers should leave the
car, specially if the vehicle is heav-
ily laden, and wait for the wheel
to be changed out of harm of the
traffic.
If parked on a slope or rough road,
place wedges or other suitable de-
vices under the wheels to prevent
the car from rolling. Do not grease
the threads of bolts before in-
stalling them; they might slip out.
WARNING
The spare wheel is specific
to your model of car: do
not use it on another model or use
the spare wheel of other models on
your car. On cars fitted with tyres
215/55 R16 (*), 225/45 R17,
235/40 R18 and spare wheel with
tyre 215/55 R16 (*), since the
spare wheel is different from the
standard wheels, observe the in-
structions for use given below:
– The spare wheel should only be
used in an emergency.
– Use of the spare wheel should
be kept to a minimum. Do not
drive at speeds of over 80 km/h.
– The car will handle differently
when the spare wheel is fitted.
Avoid sudden acceleration or brak-
ing, sharp corners and fast bends.
– Check at regular intervals that
spare wheel pressure is equal to
2.7 bar (2.7 kg/cm
2).
– Two or more spare wheels
should never be used together.
Have the wheel changed repaired
and refitted as soon as possible.
WARNING
On cars fitted with tyres
215/55 R16 (*), 225/
45 R17, 235/40 R18 and spare
wheel with tyre 215/55 R16 (*),
do not apply the wheel cap on the
spare wheel. The spare wheel has
an orange sticker with the main
cautions about use of the wheel it-
self and instructions for use.
The sticker must absolutely never
be removed or covered.
The sticker contains the following
instructions in four languages:
– WARNING! Only for temporary
use 80 km/h max!
– Replace with standard service
wheel as soon as possible.
– Do not cover these instructions.
The vehicle may fall if the jack is
not positioned correctly.
WARNING
(*) Tyre 205/55 R16 for versions/mar-
kets where applicable.

159
Do not use the jack for
higher capacities than
stated on its label.
Absolutely never tam-
per with the inflation
valve. Do not insert
tools of any kind be-
tween the rim and the tyre.Routinely check that the
pressure of tyres and s-
pare wheel is as speci-
fied in the “Technical specifica-
tions” chapter. Raise the car only
laterally. The car must absolutely
never be raised placing the plate
of the workshop lift arm under
the aluminium crossmember of
the rear suspension.CHANGING A WHEEL
Please be informed that:
– The jack mass is 2.100 kg.
– The jack requires no adjustment.
– The jack cannot be repaired, in the
event of breakage it must be replaced by
another original one.
– No tools other than its operating
crank can be fitted to the jackTo change a wheel proceed as follows:
– Stop the car in such a position that it
is not dangerous for the traffic where it is
possible to change the wheel safely.
Where possible, park on a level, compact
surface.
– Engage the handbrake
– Engage 1st gear or reverse. For cars
with automatic gearbox set the lever to
positionP.
– Open the boot.
– Fold forward the boot mat (A-
fig. 1).
– Slacken the ring nut (A-fig. 2) and
remove the spare wheel.
– Take the tool bag (A-fig. 3) and
bring it near to the wheel to be changed.
The jack only serves for
changing wheels on the
car with which it is provided or on
cars of the same model. It must not
be used for other purposes such as
for instance raising cars of other
models. In no case should it be used
for repairs under the vehicle.
WARNING
P4C00057564PGSm
fig. 1

162
REFITTING A NORMAL WHEEL
Refit the wheel as described below:
– Stop the car in such a position that it
is not dangerous for the traffic where it is
possible to change the wheel safely.
Where possible, park on a level, compact
surface.
– Engage the handbrake
– Engage 1st gear or reverse. For cars
with automatic gearbox set the lever to
positionP.
– Open the boot.
– Fold back the boot mat (A-fig. 1).– Take the tool bag (A-fig. 3) and
the spare wheel and bring them near to
the wheel to be changed.
– Remove the wheel cap (A-fig. 4)
(if present) levering on the edge with the
flat-tipped screwdriver provided in the tool
bag.– Using the L-wrench (B-fig. 5) pro-
vided, loosen the fastening bolts (A) by
about one turn.
– Position the jack under the car next
to the wheel to be replaced (fig. 6):
Position1: changing a rear wheel;
Position2: changing a front wheel.
– Turn the knob (A-fig. 7) of the jack
to extend it until the pin (B), on the on
the upper part of the jack inserts correctly
in the seat on the body (C).
– Fit the L-wrench (A-fig. 8) on the
jack pin (B).
392PGSm
fig. 10
1026PGSm
fig. 11
A0D0134m
fig. 9
A0D0135m
fig. 12

206 ANNUAL INSPECTION
PLAN
An annual inspection plan has
been established for cars that cov-
er less than 20,000 km a year
(e.g. 10,000 km). It consists of
the following:
– Checking the condition/wear of tyres,
and adjusting pressure (including the com-
pact spare wheel, where applicable).
– Checking the lighting system (head-
lights, turn indicators, hazard warning
lights, boot light, passenger compart-
ment, warning lights of instrument panel,
etc.).
– Checking the working order of the
windscreen wiper-washer and adjusting
the nozzles.
– Checking the positioning/wear of the
windscreen wipers.
– Checking the condition and wear of
the front brake pad.– Sight inspect the conditions of: en-
gine, gearbox, transmission, pipes and
hoses (exhaust - fuel - brakes), rubber
parts (boots, sleeves, bushes, etc.).
– Check for bonnet and boot lock clean-
ness, lever cleanness and lubrication.
– Check battery charge and fluid level
(electrolyte).
– Visually checking the condition of the
belts and various controls.
– Checking and topping up, if neces-
sary, the level of liquids (coolant, brake
fluid, windscreen washer fluid, battery
etc.).
– Change engine oil and oil filter, if re-
quired.
– Check and replace pollen filter, if re-
quired.
– Check and replace air cleaner, if re-
quired.
ADDITIONAL OPERATIONS
Every 1000 kmor before long jour-
neys check and if necessary top up:
– the engine coolant fluid level
– brake fluid/hydraulic clutch control
fluid level
– power steering fluid level
– windscreen washer and headlamp
washer fluid level
– tyre pressure and conditions.
– check light system operation (head-
lights, direction indicators, hazard lights,
etc.).
– check windscreen wiper/washer op-
eration and windscreen/rear window
blade position/wear.
Every 3000 kmcheck the level of
the engine oil and top up if necessary.
Every 5000 km(only for fuel oil en-
gines): drain the condensation water
from the filter. You are recommended to
use products of the FL Selenia, de-
signed and developed expressly for Alfa
Romeo cars (see the table “Fluids and lu-
bricants” in the Technical specifications”
chapter).

245
RYM AND TYRES
Progression and Distinctive Impression Versions Version
Standard fittings
- rim diameters 6.5J x 16" 7.5J x 17"
- tyres (tubeless) 215/55 R16 93W (*) 225/45 R17 91Y
Optional
(for versions/markets
where applicate
- rim diameters 7.5J x 17" 6.5J x 16"
- tyres (tubeless) 225/45 R17 91Y 215/55 R16 93W (*)
- rim diameters 8J x 18" 8J x 18"
- tyres (tubeless) 235/40 R18 91Y 235/40 R18 91Y
Winter tyres
- rim diameters 7J x 16" 7J x 16"
- tyres (tubeless)215/55 R16 93H M+S 215/55 R16 93H M+S
- rim diameters 6.5J x 16" 6.5J x 16"
- tyres (tubeless)205/55 R16 91H M+S 205/55 R16 91H M+S
(*) For versions/markets where applicable tyres 205/55 R16 91W.
SPARE WHEEL
Cars fitted with steel rims and tyres 215/55 R16 (*) have s-
pare wheel identical with the standard wheels. Cars fitted with a-
luminium alloy rims and tyres 215/55 R16 (*), 225/45 R17
and 235/40 R18 have the spare wheel with steel rim and tyre
215/55 R16 (*).
On cars fitted with tyres 215/55 R16 (*),
225/45 R17, 235/40 R18 and spare
wheel with tyre 215/55 R16 (*), since the spare
wheel is different from the standard wheels, observe
the instructions for use given below.
– The spare wheel should only be used in an emer-
gency.
– Use of the spare wheel should be kept to a mini-
mum. Do not drive at speeds of over 80 km/h.
– The car will handle differently when the spare
wheel is fitted. Avoid sudden acceleration or braking,
sharp corners and fast bends.
– Check at regular intervals that spare wheel pres-
sure is equal to 2.7 bar (2.7 kg/cm
2).
Two or more spare wheels should never be used to-
gether. Have the wheel changed repaired and refit-
ted as soon as possible.
WARNING

246
Note for one way tyres
There are arrows on the side of one-way
tyres indicating the direction of rotation.
When a wheel is changed (for example
after a puncture, the direction of the ar-
row on the spare wheel might not coin-
cide with the direction of rotation of the
wheel to be changed. Even in these con-
ditions the tyre is still safe but you are ad-
vised to have the tyre repaired and refit-
ted as soon as possible, because top per-
formance is obtained when all the wheels
turn in the direction of the arrow.NoteThe vehicles are fitted with tube-
less tyres. See chapter “Getting the best
out of your car” for indications concerning
tyres in general and the specific recom-
mendations for tubeless tyres. When re-
placing tyres and/or rims maintain the o-
riginal rim/tyre match.IMPORTANTTyre pressure should be
increased by 0.3 bars when driving at
sustained high speed. With winter tyres
the pressure should be +0.2 bar higher
than the rating specified for standard
tyres. Do not use inner tubes with tube-
less tyres.
Snow chains can be fitted
only on wheels with 6.5J x
16” rims and 215/55 R16
(*) tyres or 7.5J x 17” rims and
225/45 R17 tyres.
(*) For versions/markets where
applicable tyres 205/55 R16.

247
TYRE INFLATION PRESSURE (unladen and in running order)
Tyres
215/55 R16 93W
front rear
2.3 2.3
2.3 2.3
2.3 Tyres
205/55 R16 91W (*)
front rear
2.3 2.3
2.3 2.3
2.3Tyres
225/45 R17 91Y
front rear
2.7 2.5
2.7 2.5
2.7Tyres
235/40 R18 91Y
front rear
2.7 2.7
2.7 2.7
2.7
Reduced load(2 occupants) bar
Full load bar
Spare wheel bar
(*) For versions/markets where applicable
While the specified dimensions remain unchanged, for travelling safety and correct operation of the
VDC, ASR and ABS systems the tyres must absolutely be of the same brand and type on all wheels,
in perfect conditions and above all of the specified type and brand.
WARNING

265
Radio ........................................122
Radio-frequency remote control ........251
Radio transmitters and cellular
telephones ..............................156
Rain sensor ....................................61
Rear fog guards ..............................94
Rear roof lamps ............................101
Rear seat ........................................35
Rearscreen heating ..........................86
Refuelling......................................236
Relay (replacement) ......................186
Reversing lights..............................178
RPM counter....................................71
Safeguarding the emission
control devices ..........................150
Safeguarding the environment ........129
Safety belts ....................................40
Ski compartment ............................35
Snow chains..................................147Spark plugs ..................................224
Starting device ............................26-27
Stationary vehicle ..........................138
Steering........................................242
Steering column stalks ......................57
Steering lock ..................................27
Steering wheel (adjustment lever) ......36
STR system (Sport Throttle Response) 63
Sun visors ....................................100
Sunroof ........................................103
Supply/ignition ............................238
Technical specifications..........231
Telephone (provision) ....................102
Third stop light (bulb change) ..........180
Top speeds ....................................239
Tow hook ..............................153-154
Towing the car or another vehicle......196
Towing trailers ..............................152
Transmission ................................242Travelling ......................................137
Tyres
- Correct reading ........................248
- Inflation pressure ......................247
- Winter tyres ............................147
Useful accessories ........................156
VDC (system)..............................117
VDC and ASR systems ....................117
Vehicle inactivity ............................155
Vehicle lifting ................................197
Warning lights ..............................73
Weights ........................................237
Wheel rims....................................245
Windscreen wiper ............................61
Wing mirrors ..................................37

Tyre pressure should be increased by 0.3 bar when driving at sustained high speed. With winter tyres the pressure should be +0.2 bar higher than the rating specified for standard tyres.
ENGINE OIL REPLACEMENT (litres)
Do not discard used oil in the environment
REFUELLING (litres)
Only use unleaded petrol with no less than 95 R.O.N.
Only use Diesel fuel for motor vehicles that meet European Specification EN590.
QUALITYASSISTENZA TECNICA - INGEGNERIA ASSISTENZIALE
Largo Senatore G. Agnelli. 5 -10040 Volvera - Torino (Italia)
Fiat Auto S.p.A.
Publication no. 60431511 - 2
ndEdition - 11/2006All rights reserved. Reproduction, even in part is prohibited without written permission
from Fiat Auto S.p.A.
SERVICE
3.2 V6 24VJTD 20VMultijet
Engine oil (quantity for periodical change,including the oil filter change)5.90 5.0
3.2 V6 24VJTD 20VMultijet
Fuel tank capacity 69 69
Reserve (litres) 9 9
TYRE INFLATION PRESSURE COLD (bar)Tyres215/55 R16 93Wfront rear
2.3 2.3
2.3 2.3
2.3
Tyres205/55 R16 91W (*)front rear
2.3 2.3
2.3 2.3
2.3
Tyres225/45 R17 91Yfront rear
2.7 2.5
2.7 2.5
2.7
Tyres235/40 R18 91Yfront rear
2.7 2.7
2.7 2.7
2.7Reduced load(2 occupants) bar
Full load bar
Spare wheel bar
(*) For versions/markets where applicable