display Acura TSX 2013 Navigation Manual

154

Playing Hard Disc Drive (HDD) Audio
Searching for Music
Audio
Searching for MusicHAUDIO button (in HDD mode)
 MUSIC SEARCH
Search for music recorded to HDD using six different methods.
1.Rotate
i
to select a search
category. Press
u
.
2.Rotate
i
to select an item.

Move
w
or
y
to select
alphabetical tabs on some screens.

The first track begins playing.
1Searching for MusicAlbums
, Artists
, and
Tracks
display lists in
alphabetical order.
Ripped Date
displays albums
in chronological order. You can also search for music on the HDD through voice commands using SBV. 2Searching for Music Using Song By Voice™ (SBV)
P. 163
RANDOM ALL TRACKS Move
r to select
RANDOM ALL TRACKS
to
shuffle the playback of al
l tracks that have been
recorded to HDD.
QRG
Press
u
.

157

Playing Hard Disc
Drive (HDD) Audio
Displaying Music Information
Displaying Music InformationHAUDIO button (in HDD mode)
 AUDIO MENU
 Get Music Info.
Display the music information (album name, artist name, genre) for an album (original playlist).
Gracenote® searches for the information of the currently selected album (original playlist).Rotate
i
to select an album.
The information is displayed.
1Displaying Music InformationThe maximum number of or
iginal playlists is 999
with a maximum of 99 songs in each playlist. Each album CD counts as an original playlist.
QRG
Audio
Press
u
.

159
Playing an iPod®1.Unclip the USB connector a
nd loosen the adapter cable.
2.Install the iPod® dock connector to the USB connector.■Connecting an iPod®
1Connecting an iPod®•Do not leave the iPod® in the vehicle. Direct sunlight and high temp
eratures may damage
it.•Do not use an extension cable with the USB adapter cable.•Do not connect your iPod® using a hub.•Do not use a device such as a card reader or hard disk drive, as th
e device or your tracks
may be damaged.•We recommend backing up your data before using the device in your vehicle.•Displayed messages ma
y vary depending on
the device model and software version.Your audio system ma
y not work with all
software versions
of these devices.
If the audio system do
es not recognize your
iPod®, try reconne
cting it a few times or reboot
the device.
■Model Compatibility
Model
iPod (5th generation) iPod classic 80GB/160GB (launch in 2007)iPod classic 120GB (launch in 2008) iPod nanoiPod touch
QRG
Audio

160

Playing an iPod®
Selecting iPod® Mode
Audio
Selecting iPod® Mode1.Connect the iPod® to the USB adapter cable in the console compartment.2.Press the AUX button until you get to iPod® mode.3.Select a track using the iPod® menu on the screen.
The current track number and total number of tracks are displayed on
the
display.
Audio Screen ControlHAUDIO button (in iPod® mode)Control the audio screen through the navigation system.
Rotate
i
to select a track. Press
u
.
Move
e to select
MUSIC SEARCH

to change songs in
the track list.
2Searching for Music
P. 162
Move
r to select
AUDIO MENU
.
2Audio Menu
P. 161
1Playing an iPod®d
“Display audio screen”
You can control the iPod® using voice control commands. 2iPod® Commands
P. 241
A visual guide helps
you operate the audio
system.2System Controls
P. 4
2Basic Operation
P. 6
Available operating functi
ons vary on models or
versions. Some functions
may not be available on
the vehicle’s audio system. If there is a problem, you may see an error message on the display. 2Error Messages
P. 217
iPod® mode
Track list
QRG

161

Playing an iPod®
Audio Menu
Audio MenuHAUDIO button (in iPod® mode)
 AUDIO MENU
Rotate
i
to select an item. Press
u
.
The following items are available: •Sound Setup:
Displays the sound preferences screen.
2Adjusting the Sound
P. 170
•Repeat 6
: Repeats the current track.
•Shuffle:3
: Plays all tracks in the track list in random order.
5
: Plays all tracks in the track list in
random order by albums. Each song in an
album is played in the right order and only the order of albums is randomized.
1Repeat and Shuffle Play1.Rotate
i
to select
Repeat
or
Shuffle
. Press
u.
2.Rotate
i
to select an option. Press
u.
QRG
Audio

162

Playing an iPod®
Searching for Music
Audio
Searching for MusicHAUDIO button (in iPod® mode)
 MUSIC SEARCH
Search for music usi
ng the iPod® menu.
1.Rotate
i
to select a search
category. Press
u
.
2.Rotate
i
to select an item. Press

The selection begins playing.
1Searching for MusicThe order of the track list
displayed if you select
“All” on the iPod® menu varies depending on the iPod® model
and software.
You can also search for music on the iPod® through voice commands using SBV. 2Searching for Music Using Song By Voice™ (SBV)
P. 163
SHUFFLE ALL TRACKS Move
r to select
SHUFFLE ALL TRACKS
to
shuffle the playback of
all tracks on the iPod®.
QRG
Press
u
.

163
Searching for Music Using Song By Voice™ (SBV)Use Song By Voice™ (SBV) to search for
and play music from your HDD or iPod®
device using voice commands.
1.Set
Song By Voice
to
ON
in the
system setup. 2Song By Voice™ (SBV)
P. 45
2.Say
d
“Hard Disc Drive Search”
or
d
“iPod Search”
to activate the
SBV feature for the HDD or iPod®.
The SBV commands that
you
can use are displayed on
the screen.
3.Say a command.
Example 1: Say
d
“List Artist
‘Artist A’”
to view a list of songs
by that artist. Select the desired song to start playing.

Example 2: Say
d
“Play Artist
‘Artist A’”
to start playing songs
by that artist.
4.To cancel SBV mode, press
the
CANCEL (BACK) button on
the
steering wheel or any button
on the navigation system
interface.
The selected song
continues
playing.
1Searching for Music Using
Song By Voice™ (SBV)
The SBV voice commands give you more control over the music than the regular iPod® and HDD voice commands. 2Song By Voice™ Commands
P. 241
You can add phonetic modi
fications of difficult
words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands. 2Phonetic Modification
P. 46
SBV may not be able
to recognize languages
other than English for the artist name, song title, album title, and composers. Once you have canceled this mode, you need to say
d
“Hard Disc Drive Search”
or
d
“iPod
Search”
again to re-activate this mode.
QRG
Audio

164Audio
Playing a USB Flash Drive1.Unclip the USB connector a
nd loosen the adapter cable.
2.Install the USB flash drive to the USB connector.Use a recommended USB flash drive of 256 MB or higher. Some digital audio players may not be compatible.Some USB flash drives (e.g., a device with security lockout) may not work.Some software files may not allow for
audio play or text data display.
Some versions of MP3, WMA, or AAC formats may be unsupported.■Connecting a USB Flash Drive
1Connecting a USB Flash Drive•Do not leave the USB flash drive in the vehicle. Direct sunlight and hi
gh temperatures may
damage it.•Do not use an extension cable with the USB adapter cable.•Do not connect your US
B flash drive using a
hub.•Do not use a device such as a card reader or hard disk drive, as th
e device or your tracks
may be damaged.•We recommend backing up your data before using the device in your vehicle.
■USB Flash Drives
1USB Flash DrivesDigital music tracks, such as MP3, WMA, AAC etc., in USB flash drives cannot be copied to HDD. Likewise, digital music tracks recorded to HDD cannot be copied to USB flash drives.
QRG

165

Playing a USB Flash Drive
Selecting USB Mode
Selecting USB Mode1.Connect the USB flash drive to the
USB adapter cable in the console
compartment.2.Press the AUX button until you get to USB mode.3.Select a track using skip, scan,
folder list, or track list.

The current track number and folder number are displayed on the display.
Audio Screen ControlHAUDIO button (in USB mode)Control the audio screen through the navigation system.
Rotate
i
to select a track. Press
u
.
Move
e to select
FOLDER LIST
to
display the folder list. 2Playing Tracks in Folders
P. 167
Move
r to select
AUDIO MENU
.
2Audio Menu
P. 166
1Playing a USB Flash Drived
“Display audio screen”
You can control the audio system using voice control commands. 2USB Commands
P. 240
A visual guide helps
you operate the audio
system.2System Controls
P. 4
2Basic Operation
P. 6
Tracks on the USB flash drive are played in their stored order. This orde
r may be different from
the order displayed on
your PC or device.
The audio system displa
ys UNPLAYABLE FILE, and
then skips to the next track when the following tracks are played:•Tracks in WMA format protected by digital rights management (DRM)•Tracks in unsupported formatIf there is a problem, you may see an error message on the display. 2Error Messages
P. 217
USB mode
Track list
QRG
Audio

166

Playing a USB Flash Drive
Audio Menu
Audio
Audio MenuHAUDIO button (in USB mode)
 AUDIO MENU
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•Sound Setup
: Displays the sound preferences screen.
2Adjusting the Sound
P. 170
•Repeat
:
6
: Repeats the current track.
7
: Repeats all tracks in the current folder.
•Random
:
3
: Plays all tracks on the USB flash drive in random order.
4
: Plays all trakcs in the curr
ent folder in random order.
•Scan
:
1
: Scans all tracks in the current folder in
the order they were stored and plays
a 10-second sample. Select
OFF
to stop scanning and pl
ay the current selection.
2
: Scans the first track in each folder
on the USB flash drive and plays a 10-
second sample. Select
OFF
to stop scanning and pl
ay the current selection.
1Repeat, Random, and Scan Play1.Rotate
i
to select
Repeat
, Random
, or
Scan
. Press
u.
2.Rotate
i
to select an option. Press
u.
QRG