brake sensor AUDI A4 1998 B5 / 1.G APB Engine Motronic Multiport Fuel Injection System Servising Workshop Manual
Page 7 of 90
24-5
Component locations, overview
Components A to I are not shown in the exploded
drawing.
A - Brake Light Switch -F- and Brake Pedal
Switch -F47-
In footwell on pedal bracket near brake
pedal
B - Diagnostic connectorIn front knee protection, driver side
C - Fuel Pump (FP) relay -J17-Relay position 4 of central electrics left side
under dash panel
D - Clutch Vacuum Vent Switch -F36In footwell on pedal frame
E - Throttle Position (TP) Sensor -G79-
and Sender -2- for accelerator pedal
position -G185 In footwell on accelerator pedal (both
senders are installed in one housing)
Pa
ge 7 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1
Page 18 of 90
24-16
2 -
Disconnect harness connector from EVAP
Canister Purge Regulator Valve -N80.
3 -
Loosen both exhaust temperature
sensors -G235 and -G236 from intake
manifold. The sensors remain connected.
Ensure Ground cable is tight when
installing.
4 -
Loosen hose to brake booster at
bulkhead.
Pa
ge 18 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1