sim AUDI Q2 2021 Owner´s Manual

Audi smartphone interface

CO

rN
IV
rN
t-H
o <
Audi smartphone
interface
Setting
upx)

Applies to: vehicles with Audi smartphone interface

You
can connect your smartphone to the MMI
system via the Audi smartphone interface. Some
of the content
on
your smartphone is displayed
in an optimised
screen
format on the infotain­
ment display and can be operated via the MMI
control console.
Important
The vehicle must be stationary, and the ignition
must be switched on.
iPhone 5 or later with Lightning connector and
operating system iOS 7.1.2 or higher or:
Smartphone with Android Auto app and operat­
ing system Android 5.0 Lollipop or later.
• Connect your smartphone to the Audi music in­
terface
opage
241 via a USB adapter

^> page
240, Fig. 196.

•
Select and confirm Activate Apple CarPlay or
Activate Android Auto now.

•
Follow the instructions given by the system.
• Please note any system queries on your smart­

phone.

If
you
decline the use of Apple CarPlay or Android
Auto the first time you connect your smartphone,
you can start the Audi smartphone interface at a
later time via the connection manager.

•
SeLect:
|MENU|
button
>
Audi smartphone in­
terface > Switch to connection manager.

•
Connect your smartphone to the Audi music in­
terface via a USB adapter
^>page
240, Fig. 196.

*•
Select and confirm Audi smartphone in Con­
nection manager
<3>page
257. You can select
your smartphone from the list of devices al­
ready connected
^page
258.

•
Follow the instructions given by the system.
© CAUTION
Please always observe the information
=>®
in
Wi-Fi hotspot on page 202.
- The functions you can use depend on a num­
ber of factors including:
-The brand of your smartphone
-The operating system version of your
smartphone
- The software version of the app in use
- The USB adapter/cable and the correct
connection
- Your mobile network/service provider
- The individual settings on your smart­
phone
- One or several of the factors listed above
can result in your smartphone being incom­
patible with the Audi smartphone interface.
We regret that it is not possible to guaran­
tee compatibility for all types of smart­

phone.
For further information and support,
please refer to the operating manual of your
smartphone or contact its manufacturer.
- If the smartphone you have connected has a
voice controL feature, you can control your
smartphone using the external speech
con­

trol system
^>page
170.
-The menu language displayed on the MMI is
based on the setting on your smartphone.
- The time displayed on the MMI is based on
the setting on your smartphone.
- Some of the MMI functions are not available
while an Apple CarPlay or Android Auto
con­

nection is active.
- You cannot use mobile devices via Bluetooth
when an Apple CarPlay connection is active.
- If
you
have inserted your own mini SIM card
in the SIM card reader* for making phone

calls,
the SIM card will be used exclusively
for
a
data connection when the Audi smart­
phone interface and the car phone function*

^page
172 are active.

x)
Not available in all markets.
253

System settings
Connection manager
Introduction

The
connection manager
gives
you an overview
of your connected
devices
and their connection
status.

Settings
Connection manager

*
MyPhone
• Additional
phone:

-• Data
connection:

• MMI connect app:
• Audi smartphone:

Fig.
205 Connection manager

•
Select: IMENUI button > Settings
>
Left control
button > MMI settings > Connection manager.

•
Select and confirm a menu option.
If
a
mobile device has already been connected
and you then select and confirm the correspond­
ing menu item, the device's name and connection
mode is displayed under this menu item

^Fig.
205.
You can connect
((vj)
or disconnect
O)
a connec­
ted device individually.
Telephone

Applies
to: vehicles with telephone
- Connect new device: You can search for and
connect
a
mobile phone.
- List of devices already bonded: Select your mo­
bile phone from the List of all devices which
have already been bonded. Or: Insert your own
mini SIM card in the SIM card reader*

^>page
176.
Second phone

Applies
to: vehicles with Audi phone box
- Connect new device: You can search for and
connect
a
mobile phone.
- List of devices already bonded: Select your mo­
bile phone from the List of all devices which
have already been bonded.
Data connection

Applies
to: vehicles with Audi connect (infotainment)

Applies
to: option using the embedded SIM card
- The embedded SIM
card1)
will be used for the
data connection
^>page
191. You do not need
to adjust any other settings.

Applies
to: option using your own SIM card
- Connect new device: You can search for and
connect
a
mobile device (e.g. a smartphone).
- List of devices already bonded: Select your mo­
bile phone from the List of all devices which
have already been bonded. Or: Insert your own
mini SIM card in the SIM card reader*.
© CAUTION
Please always observe the information
•=>©
in
Wi-Fi hotspot on page 202.
MMI connect app

Applies
to: vehicles with Audi connect (infotainment)
Important: The Audi MMI connect app must be
installed on your mobile device and have been

started.

- Connect new device: You can search for and
connect
a
mobile device (e.g. a smartphone).
- List of devices already bonded: Select your mo­
bile device from the List of all devices which
have already been bonded.
Music

Applies
to: vehicles with Bluetooth audio player or Wi-Fi au­

dio
player
Audio player*
Important: The Bluetooth function and the dis­
coverability option of both the MMI system

opage
258 and the mobile phone must be
acti­

vated.

CO

rN
IV
rN
t-H
o <
x)
SIM card installed in vehicle at factory.
257

System settings
- To connect a new device: Press the rotary push­

button.
Select Bluetooth audio player. Search
for and connect a mobile device.
- List of devices already bonded: Select a Blue­
tooth device from the list of all devices which
have already been bonded.
Wi-Fi audio player*
Important: The Wi-Fi hotspot* on the MMI sys­
tem
<=>page
201 and your mobiLe phone must be

activated.

- To connect a new device: Press the rotary push­

button.
Search for and connect
a
Wi-Fi enabled
device.
- To disconnect a Wi-Fi audio player: Deactivate
Wi-Fi on your Wi-Fi enabled device. The device
will be removed from the list automatically.
© CAUTION
Please always observe the information
•=>©
in
Wi-Fi hotspot on page 202.

Directory

Applies to: vehicles with telephone

You
can display the contacts from (other) mobile
phones.
Important: No mobiLe phones are connected to
the MMI via the Bluetooth remote SIM Access
Profile or the Handsfree profile.
- Connect new device: You can search for and
connect
a
new mobile phone. Or: Slide your
own mini SIM card into the slot in the SIM card
reader* until you feel it engage
^>page
176,

Fig. 160.
- List of devices already bonded: Select your mo­
bile phone from the list of all mobiLe phones
which have already been bonded.
Audi smartphone
Applies to: vehicles with Audi smartphone interface
-
Connect
your mobile phone to the Audi music
interface
^>page
241 via a USB adapter

•=>page
240, Fig. 196.
- SeLect your mobile phone from the List of mo­
bile phones already connected.
Further options
Further options may be available in the connec­
tion manager via the right control button de­
pending on the function selected.
Delete Bluetooth device*
The selected mobile phone/mobile device will be
disconnected from the MMI system and removed
from the list of devices already connected.
Display Bluetooth profiles*
You can Connect or Disconnect the Handsfree,
Car phone*, Messages*, Directory/contacts and
Bluetooth audio player profiles individually.
Bluetooth settings*
- Bluetooth: Select and confirm a discoverability
setting
for
the Bluetooth connection. Select
visible to make the MMI visible to other
devi­

ces.
Select invisible to make the MMI invisible
to other devices. Devices which have already
been bonded can connect via Bluetooth even
when discoverability is deactivated. Select off
to switch discoverability off. It is then not pos­
sible to establish a Bluetooth connection.
- Bluetooth audio player: When this function is
switched on
(vf,
the Bluetooth audio player is
available as a source in the Media menu.
- Bluetooth name: The Bluetooth name of the
MMI system (e.g. "AUDI MMI 2017") is dis­
played and can be changed.
Online settings*
- Data connection settings: Refer to
^>page
203,
Configuring the data connection.
- Data usage meter: The number of the data
packets sent/received via the MMI system is

displayed.
Select Reset data meter to reset the
usage statistics to zero.
- Connection status: The mobiLe network provid­
er for data services and the network status are

displayed.

Wi-Fi settings*
Refer to
^>page
201, Wi-Fi hotspot.
258

System settings
Store as default telephone
Applies to: vehicles with telephone
Important: A mobile phone must be connected
to the MMI system
^>page
173.
This mobile phone will be prioritised over other
Bluetooth devices and connected as soon as it is
within range. For this to occur, the Bluetooth
function of both the mobile phone and the MMI
must be switched on. The connected mobile
phone is shown at the top of the device list.
SIM PIN settings*
Applies to: option using your own SIM card
- Automatic PIN entry: When this function is
switched on
[vf,
the SIM PIN is stored in the
MMI after it has been entered for the first time.
You can save the PIN codes of four different
SIM cards on the MMI. If this function is
switched off
O,
the PIN currently stored in the
MMI will be deleted. If the automatic PIN entry
function is activated, the system does not ask
you to enter your SIM PIN explicitly.
- Deactivate PIN query: The system does not ask
for the SIM PIN when you switch it on. The au­
tomatic PIN entry function is ignored in this

case.

- Change PIN: You can change the PIN code for
your SIM
card.
First enter the existing PIN code

for
your SIM
card.
The SIM PIN code can only
consist of numbers from 0 to 9. The new SIM
PIN code has to be entered twice, as a precau­
tionary measure, and is stored on the SIM
card.

Network settings*
- Registration: To dial into your service provid­
er's mobile network automatically or to select a
network manually from the list of available
networks.
- Network selection: You can use this function to
select the available networks for the current
position of the vehicLe. This function is only
available when the manual setting is activated
for registration.
Apple CarPlay sound settings/Android Auto
< sound settings

PI
Applies to: vehicles with Audi smartphone interface
fN

§
Refer to
^>page
260.
About Apple
CarPlay/About
Android Auto
Applies to: vehicles with Audi smartphone interface
Here you will find legal information about using
Apple CarPlay/Android Auto and information
about data transfer for specific devices.
Delete CarPlay device/Delete Android Auto
device
Applies to: vehicles with Audi smartphone interface
Important: Your mobile phone must no longer be
connected to the Audi music interface via a USB
adapter.
To remove your mobile phone from the list of
mobile phones already connected, select and
confirm Delete CarPlay device or Delete Android
Auto device.
© Note
Some SIM cards do not allow the SIM PIN
query to be deactivated
System update

•
Select:
|MENU|
button > Settings > left control
button > System maintenance.
- System update: Insert the storage medium
with the update data into the appropriate drive

tapage
235. Select and confirm the appropri­
ate drive > Start update. The duration of this
process depends on the size of the update.
- Reset driver installation: The media driver
package selected is reset to the factory de­

faults.

- Version information: Information on the soft­
ware version of the MMI and the navigation da­
tabase* is displayed. In addition, you can use
the Software information function to display
information on the MMI's software and licence
conditions.
259

System settings
Volume of announcements: You can adjust the
volume of traffic announcements by turning the
rotary pushbutton.
Speech dialogue system

Applies
to: vehicles with speech dialogue system
Command display: Refer to
<=>page
256.
Short dialogue: Refer to
^>page
256.
Volume: Refer to
^>page
256.
Individual speech training: Refer to
^>page
256.
Parking
aid*

You can adjust the volume of the sounds by
turn­

ing the rotary pushbutton.
- To adjust the front volume: Select and confirm

high,
medium or low.
- To adjust the rear volume: Select and confirm

high,
medium or low.
MMI touch*
You can adjust the volume of the MMI touch*
spoken cues by turning the rotary pushbutton.
Restarting the MMI
system

_

Fig.
207 Combination of buttons for restart

•
Briefly press the rotary pushbutton and
simul­

taneously press the two buttons for calling up
menus directly upwards
^>Fig.
207.
Notes on software
Licences
Information on the MMI system's software and
its licence conditions
- Select:
|MENU|
button > Settings > left control
button > System maintenance
>
Version infor­

mation.

- Or: On the Internet at www.audi.com/softwar-

einfo.

Information on the head-up display's software
and its licence conditions
- Important: The vehicLe must be stationary.
- After switching on the ignition, press and hold
the button for the head-up display for at least
five seconds
<P.

- Press the rotary pushbutton to close the infor­
mation box. Or: Drive off.
Information on the instrument cluster's soft­
ware and its licence conditions
Press the reset button
(£) ^>page
12, Fig. 4 twice
in the first five seconds after switching on the ig­

nition.

262

Seat belts
- Do not wear the belt over hard or fragile ob­
jects (such as glasses or pens, etc.) because
this can cause injuries.
- Loose, bulky clothing (such as an overcoat
over
a
jacket) impairs the proper fit and
function of the belts.
- The belts must be kept clean, otherwise the
retractors may not work properly

•=>
tab. Cleaning the interior on page 314.
- The slot in the seat belt buckle must not be
blocked with paper or other objects, as this
can prevent the latch plate from engaging
properly.
-The latch plate of the belt must always be
engaged in the correct buckle for that seat,
otherwise the belt will not be fully effective.
- Check the condition of the seat beLts at
reg­

ular intervals. If
you
notice that the belt

webbing,
fittings, retractor mechanism or
buckle of any of the belts is damaged, the
belt must be replaced by a qualified work­

shop.

- The seat belts must not be removed or
modified in any way. Do not attempt to re­
pair
a
damaged belt yourself.
- Seat belts which have been worn in an
acci­

dent and stretched must be replaced by a
qualified workshop. The belt anchorages
should also be checked.
Forces acting in a
collision
The physical principles involved in a frontal
impact

Very
large forces are generated during a
colli­

sion; these forces have to be absorbed.

Fig.
216 Passengers of
a
vehicle which is headed for a
brick
wall.
They are not using seat belts.

Fig.
217 The vehicle crashes into the wall
The physical principles involved in a frontal
colli­

sion are relatively simple:
Both the moving vehicle and the passengers pos­
sess energy, which is known as "kinetic energy"

^>Fig.
216. The amount of "kinetic energy" de­
pends on the speed of the vehicle and the weight
of the vehicle and passengers. The higher the
speed and the greater the weight, the more ener­
gy there is to be absorbed in an accident.
The most significant factor, however,
is
the
speed of the vehicle. If the speed doubles from
25 km/h to 50 km/h, for example, the kinetic en­
ergy increases by
a
factor of four. Because these
passengers are not restrained by seat belts, the
entire amount of kinetic energy has to be absor­
bed
at
the point of impact
^>Fig.
217. This would
result in serious or potentially fatal injury.
276

Airbag system
Description of front airbags How the
front
airbags work

CO

â
rN
IV
rN
•-i
§
•H
00

The
airbag system is not a substitute for the seat
belts.
When fully inflated, the airbags reduce the risk
of head or chest
injury.

Fig.
228 Steering wheel: Driver's airbag

SiMlP

Fig.
229 Dashboard: Front passenger
s
airbag
The front airbag for the driver is Located in the
padded hub of the steering wheel
^Fig.
228. The
front airbag for the front passenger is in the
dashboard above the glove box
^Fig.
229. The
locations of the airbags are marked with the
word "AIRBAG".
In conjunction with the three-point seat belts,
the front airbags give additional head and chest
protection for the driver and front passenger in
the event of
a
severe frontal collision
•=>
A'n
Im­
portant safety notes on the front airbag system
on page 284.

Fig.
230 Front airbags in inflated condition
The driver's and front passenger's airbag are
trig­

gered in certain frontal collisions
^>Fig.
230. Fur­
ther airbag systems may also be triggered, de­
pending on the circumstances.
When the system is triggered, the airbags fill
with a propellant gas and open out in front of the
driver and front passenger
^>Fig.
230. In order to
provide the desired extra protection in an
acci­

dent, the airbags have to inflate extremely rapid­
ly (within fractions of
a
second). The fully de­
ployed airbags cushion the forwards movement
of the front occupants and help to reduce the risk
of injury to the head and the upper part of the
body.
Special openings in the airbag allow the gas to
escape at
a
controlled rate to restrain the for­
ward movement of the occupant's head and tor­

so.
Once the impact has been absorbed, the air-
bag deflates sufficiently for the front occupants
to see forward.
283

Checking and topping up fluids

CO

<
O
rN
IV
rN
t-H
o <
- Make sure you never spill fuel in the
vehi­

cle or in the luggage compartment. Fuel
vapour is explosive - danger to life!
© Note
(7) CAUTION
- If any fuel is spilt onto the vehicle, it should
be removed immediately as it could other­
wise damage the paintwork.
- Never run the tank completely dry. If there
is an irregular fuel supply, misfiring can oc­
cur. As a result unburnt fuel can enter the
exhaust system and cause damage to the
catalytic converter(s).
- Applies to vehicles with diesel engine: When
filling the fuel tank after having run it com­
pletely dry, the ignition must be switched
on for at least 30 seconds before the engine
is started. When you then start the engine it
may take longer than normal (up to one mi­
nute) for the engine to start firing. This is
because air needs to be bled from the fuel
system while starting.
® For the sake of the envir
Do not try to put in more fuel after the auto­
matic filler nozzle has switched off; this may
cause the fuel to overflow if it becomes warm.

(T)
Note
Applies to: vehicles with diesel engine
Diesel vehicles are equipped with an incorrect
fuelling protection
system1).
This system en­
sures that the tank can only be fuelled from a
diesel filler nozzle.
- If the filler nozzle is old, damaged or too

small,
it may not be able to open the pro­
tection mechanism on the fuel tank. In this

case,
try turning the filler nozzle before in­
serting it in the fuel filler neck, use a differ­
ent filling pump or seek professional assis­

tance.

- The protection mechanism will not open if
you try to add fuel from a spare fuel canis­
ter. You can get round this simply by adding
the diesel fuel slowly.

1)
May vary in different countries
The tank flap is not locked when you lock the
vehicle from the inside.
Releasing the tank flap manually

The
tank flap can be released manually if the
central locking system should fail to operate.

Fig.
240 Luggage compartment (rear right): Manual re­
lease under luggage compartment floor
The manual release mechanism is located under
the floor panel in the side trim on the right of the
luggage compartment.

•
Lift up the floor panel until it is fixed in position
behind the retaining tabs on the two side sec­
tions
•=>
page 319.
• Take the screwdriver out of the vehicle tooL kit

^>page
319. Use the flat-blade side of the re­
versible insert.

•
Use the screwdriver to prise off the cover
(l)

and remove
it(|).

• Release the ring from its holder and carefully
pull the ring
(S)
-arrow-
•=>([)•
The tank flap is
then released.

•
Press the left side of the tank flap to open it

•=>
page 290, Fig. 238.
© CAUTION
Stop pulling the ring when you feel resistance
at the ring/cover (the release mechanism is
not audible). Otherwise, you could damage
the manual release mechanism.
291

Wheels

WheeLs

Tyres and rims
General notes

•
Inspect the tyres regularly for damage (cuts,
cracks or blisters, etc.). Remove any foreign
bodies embedded in the treads.

•
If
you
have to drive over
a
kerb or similar obsta­

cle,
drive very slowly and as near as possible at
a right angle to the kerb.
• Damaged rims or tyres must be replaced imme­
diately.

•
Keep grease, oil and fuel off the tyres.

•
Mark the wheels before taking them off so that
they rotate in the same direction when refitted.

•
When removed, the wheels should be stored
flat in a
cool,
dry and preferably dark place.

CO

<
O
rN
IV
rN
t-H
o <

(l)
CAUTION
- Please note that summer and winter tyres
are optimised for the prevailing road condi­
tions at different times of
year.
We recom­
mend that you use winter tyres during the
winter months. At low temperatures, sum­
mer tyres lose their elasticity and grip, and
braking performance also suffers as a re­
sult. Cracks can form in the tread block on
summer tyres if they are used at very cold
temperatures, and this can cause perma­
nent damage to the tyres. An increase in
rolling noise and tyre imbalance may result
from this damage.
- Machined, polished or chrome-plated rims
must not be used in winter conditions. The
process used to manufacture these types of
wheel rim does not provide adequate sur­
face protection against corrosion, and the
rims can be permanently damaged by road
salt or similar.
New wheels or tyres
It is best to have all servicing of wheels and tyres
performed by a qualified workshop, since they
have the necessary special tools and replacement
parts in addition to trained personnel.

•
New tyres do not yet give maximum grip. When
driving with new tyres, drive at moderate
speeds and be especially careful during the first
500 km.

•
All four wheels must be fitted with tyres of the
same type, size (rolling circumference) and
preferably the same tread pattern.
• Tyres should be replaced in pairs and not
indi­

vidually (i.e. both front tyres or both rear tyres
together).

•
We recommend the use of Audi Genuine Tyres.
If
you
wish to use other tyres, please note that
the actual size can differ from the nominal size
marked on the tyre
•=> /\.
•
If
you
wish to purchase a different combination
of rims and tyres than the ones fitted on the ve­
hicle during production, it is advisable to
con­

sult
a
qualified workshop beforehand
<=> /\.

The sizes of the rims and tyres approved
for
your
vehicle are listed in the vehicle's documents (e.g.

EC
Certificate of Conformity or COC
document1)).

The vehicle documents vary depending on the
country in which the vehicle is registered.
If the spare wheel* is
not
the same type as the
tyres fitted on the car (for example if the car has
winter tyres or wide-section tyres) you should on­
ly use the spare wheel* if
a
puncture occurs, and
then
only
for
a
short period of time. In this case,
please drive with extra care. Refit
a
normal road
wheel as soon as possible.
Applies to vehicles with four-wheel drive: All four
wheels must always be fitted with tyres of the
same type, make and tread pattern, as the drive-
line could otherwise be damaged by variations in
the wheel speeds. For the same reason, only use
a spare wheel* which has the same rolling cir­
cumference as the normal road wheels.
Manufacturing date
The manufacturing date is indicated on the tyre
sidewall (possibly only on the inner side of the
wheel): •

15 COC
= Certificate of conformity
305

Care of vehicle and cleaning
- Never clean the camera lens with cleaning
agents which are abrasive or contain alco­
hol - danger of scratches and cracks ap­

pearing.

- Windows and windscreen
- Remove snow and ice from windows and
exterior mirrors with a plastic scraper on­
ly. To avoid scratches, the scraper should
only be pushed in one direction and not
moved to and fro.
- Never use warm or hot water to remove
snow and ice from windows and mirrors.
This could cause the glass to crack!
-To avoid damaging the heating element,
do not put stickers on the inner side of the
rear window.
- Ornamental trim/mouldings
- Do not use chrome cleaning agents.
- Paintwork
- The vehicle must be free of dirt and dust
before applying polish/wax - otherwise
the paintwork may be damaged.
- Do not polish/wax the vehicle in direct
sunLight - this can damage the paint!
- Do not attempt to polish out surface rust
deposits - this can damage the paint!
- Remove cosmetics and sun Lotion immedi­
ately - otherwise the paintwork may be

damaged.

- Displays/instrument cluster
-The displays/instrument cluster and the
surrounding trim must not be cleaned
with a dry cloth - this can scratch the sur­

faces!

- Before cleaning, ensure that the instru­
ment cluster is switched off and
cool.

- Do not let any Liquid get between the in­
strument cluster and the trim - risk of
damage!
- Do not exert heavy pressure on the head-
up display* when cleaning it. This could
push the dispLay out of its guide rails - risk
of damage!
- Control consoles
- Do not let any liquid get inside the control
consoles - risk of damage!
- Seat belts
- Do not remove the seat belts to clean

them.

- Do not use chemical cleaning agents, cor­
rosive liquids, solvents or sharp instru­
ments to clean the seat belts or their com­
ponents - this can damage the belt web­

bing!

- If
you
find any damage to the belt web­

bing,
the belt fittings, the belt retractor or
the buckle, have the belt in question re­
placed by
a
qualified workshop.
- Fabrics/leatherette/Alcantara
- Do not use leather care products,
sol­

vents,
wax polish, shoe cream, stain
re­

movers, or any similar products on leath­
erette/Alcantara fabrics.
-To avoid damage, stubborn stains should
be removed by
a
qualified workshop.
- Never use steam cleaners, brushes, hard
sponges or similar utensils.
- Do not use the seat heating* to dry the

seats.

- Sharp-edged objects on clothing, such as
zip fasteners, rivets or belts, can also
damage the surface of the fabric.
- Please make sure you close any velcro fas­
teners, e.g. on your clothing, as these
could otherwise damage the upholstery.
- Natural leather
- Do not use solvents, wax polish, shoe

cream,
stain removers, or any similar
products on leather fabrics.
- Sharp-edged objects on clothing, such as
zip fasteners, rivets or belts, can also
damage the surface of the fabric.
- Never use steam cleaners, brushes, hard
sponges or similar utensils.
- Do not use the seat heating* to dry the

seats.

- Avoid exposing leather to direct sunlight
for long periods, otherwise it may tend to
lose some of its colour. If the car is
Left
for
a prolonged period in the bright sun, it is

best
to cover the leather. •
316