reset BUICK LUCERNE 2006 Get To Know Guide

Navigation System 2006 Buick Lucerne Step by Step Information

Vehicle List
A list of vehicles that use this system appears below. If the vehicle name appears as
a link, a Navigational Supplement is available for that vehicle.

2006 Buick Lucerne

Topics Included
Section I: System Diagram


Section II: Map DVD

Loading and Ejecting the Map DVD

The Caution Screen


Section III: Setting and Deleting Destinations

Setting a Destination by Address

Setting a Destination by Point of Interest (POI)

Creating an Address Book Entry

Setting a Destination to an Address Book Entry

Adding or Changing Preset Destinations

Setting a Destination by Preset Destinations

Setting a Destination by Previous Destination

Setting a Destination by Picking from the Map

Setting a Destination by Map Coordinates

Setting a Destination by Intersection (Cross Street)

Storing Voice Tags

Setting a Destination through Voice Recognition

Deleting a Destination

Adding a Stopover

Deleting a Stopover


Section IV: Other Nav Features

Displaying POI Icons on Screen

Adjusting Route Preferences

Choosing from Multiple Route Options

Setting Detours

Avoiding Turns

Previewing the Route

Suspending and Resuming Guidance

Map Orientation

Editing and Deleting Address Book Entries

B. FULL MAP screen
button Touching this screen
button displays the screen
in full map view.
Touching the audio screen
button next to it will split
the screen between the
map and the current audio
source menu.
C. No GPS symbol When this symbol
appears, the vehicle is not
receiving a Global
Positioning System (GPS)
signal.
D. Power/Volume knob Press this knob to turn the
system on and off. Turn
the knob to increase or
decrease the volume to
the audio system.
E. North Up/Heading Up
symbol Indicates the orientation
of the screen. Touch this
screen button to change
the map orientation.
F. NAV (Navigation) hard
key Press this key to view
your vehicle’s current
position on the map. Each
press of this key cycles
you through the F
ULL MAP
tab and the current audio
source tab.
G. DEST (Destination)
hard key Press this key to access
the DESTINATION ENTRY
screen. When a route has
been planned, pressing
the button will access the
ROUTE screen.
H. RPT (Repeat) hard key Press this key to repeat
the last voice command.
I. FAV (Favorite) hard
key Press this key to access
the preset stations.
J. Map Scale Displays the current map
scale.
K. (Zoom In) screen
button Zooms in on the map.
L. MARK screen button Allows you to add a

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the A
DDRESS BOOK screen button. The ADDRESS BOOK screen will
appear listing your address book entries.



3. Touch the G
O screen button next to the address you wish to select. The map
screen, with the destination marked will display.

4. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

5. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Refer to the following for further info:
Creating an Address Book Entry

Deleting a Destination


Adding or Changing Preset Destinations

There are two ways to add a preset destination:

1. Method I: To store the current final destination as a preset destination:
a. Touch the M
ARK screen button from the map screen to add the current final
destination. The ADDRESS BOOK screen will appear.
b. Touch the N
AME screen button. An alpha keyboard will display. Enter
the name.
c. Press and hold one of the buttons at the bottom of the screen until the name
appears in that preset destination screen button. It is now available to select from
the DESTINATION ENTRY screen.

2. Method II: To store an address book entry as a preset destination:

a. Press the MENU hard key.
b. Touch the NAV screen button or press the MENU hard key until NAV is
selected.



d. Select the address book entry that you would like to store as the preset
destination. Touch the N
AME screen button to add a name, if needed.
e. Press and hold one of the buttons at the bottom of the screen until the name
appears in that preset destination screen button. It is now available to select from
the DESTINATION ENTRY screen.

Refer to the following for further info:
Setting a Destination by Preset Destinations


Setting a Destination by Preset Destinations

This method allows you to set a destination by selecting from one of five previously stored
destinations. You can use this method while the vehicle is moving.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear. The
preset destinations are shown across the bottom of the screen and are labeled with
the name that was selected when the destination was stored. If a screen button is
dimmed, no destination has been assigned to that button.

2. Touch the desired preset destination screen. The map screen with the
destination marked will display.

3. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

4. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Refer to the following for further info:
Deleting a Destination


Setting a Destination by Previous Destination

This method allows you to select a destination from a list of previous destination
points. Up to 100 previous destinations will be stored. As new destinations are
entered, the system will automatically delete the oldest destinations.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the P
REVIOUS DESTINATION screen button. The PREVIOUS DESTINATION
screen will appear listing your previous destinations.