Citroen C CROSSER 2008 1.G Owner's Manual

Page 201 of 216

ABCDE
FGHIJ
KLM
RQPON
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
198
Information displayed in DVD mode
The DVD button is only active if the
player contains a DVD. Press Open to return the display to the
vertical position. For safety reasons, the video
is not displayed while driving,
however the audio can be
played.
To display the picture and watch
a DVD, park the vehicle in a safe
place.

K. To display the DVD title menu.
L. To scroll up or down through the
chapters.
Press and hold for fast backwards
or forwards play.

M. To scroll up or down through the
titles.

N. To enter a title or chapter number.

O. To change the angle.

P. To change the language of the
subtitles.

Q. To change the language .

R. To select a chapter or title or specify
a number.

A. This icon is displayed when the
operation requested cannot be
carried out.

B. The number of the chapter currently
being played is displayed.

C. The number of the title currently
being played is displayed.

D. Symbols display the current status
of the player.

E. The playing time is displayed.

F. To resume normal play when play is
paused or during slow-motion play.

G. To stop play temporarily.

H. To stop play. Press the screen to
access the menu.

I. For slow-motion play.

J. To play the previously selected zone
on the disc.

Page 202 of 216

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
199
Playing a DVD Result
Explanations
Selecting a chapter
Press the MODE button then DVD, if the player already contains
a DVD.
Otherwise, insert a DVD in the player, the picture is displa yed
automatically. Press the screen to access the menus.
While driving, the sound band alone is played and no pi cture is dis-
played.
Press [  Chapter] to select the previous chapter or return to the begi n-
ning of the chapter currently being played.
Press and hold for rewind play.
Press [ Chapter  ] to select the next chapter.
Press and hold for fast forwards play.
Selecting a title
Press [  Title] to select the previous title.
Press [Title  ] to select the next title.
Press

Page 203 of 216

ABCB1B2
B3
C1C2C3C4C5
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
200

A - Choose to switch off the display.
To switch it back on, touch the
screen or press any button.
B - Choose the settings of the sound
in the vehicle, if an audio source is
selected (FM, CD, ...), for:

B1 - the sound distribution or the volume
such as the front-rear balance, the
bass, the medium, the treble, the
volume adjustment in relation to
the vehicle speed,
B2 - the type of music (with surround
option) such as classic, jazz, pop,
rock, hip hop, country, normal, ...
B3 - the sound fi eld (with surround
option) such as stage, live, hall,
normal, ...

C - Choose the quality of the picture
for:
C1 - the colour (when playing DVDs),
C2 - the intensity of the colours (when playing DVDs),

C3 - the brightness,

C4 - the contrast,

C5 - the level of black.
SETTINGS
Display, sound, picture

Page 204 of 216

DE
E1E2E3E4
D1D2
D3D4
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
201
Time and date, language, unit,
picture size
E - Choose the size of the DVD picture
for:
E1 - normal 4/3,
E2 - extends the picture evenly to the right and to the left in wide screen mode,

E3 - extends the right and left parts only
leaving the centre as it stands in wide
screen mode,
E4 - enlarges the picture in 4/3 format.The top and the bottom are outside the
frame.
D
- Choose the base settings of the
system for:

D1 - setting of the time by the RDS signal,
time zone, summer time,

D2 - the language (English, Français,
Deutsch, Nederlands, Portuguese,
Español, Svenska, Italiano, Dansk),

D3 - the units for calculation of the
distances (km or miles and °C or °F),

D4 - other settings such as:
- the voice guidance volume,
- the type of voice guidance voice (female or male),
- the volume of the operation bleeps (1 to 3 and 0=no bleep),
- the type of inputting keypad (alphabet or PC),
- the range of menu colours (red or blue),
- the displaying or not of the audio playing icons on the map screen,
- the reinitialisation of the vehicle sensor,
- the interruption or not of the display when the air conditioning is used.

Page 205 of 216

H
G
F
F1
F2
F3
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
202
Equipment, contrast, traffic information (TP) F - Choose to adjust or set the
parameters of certain equipment
offered in your vehicle (e.g.
unfolding/folding of the mirrors,
raising of the windows on
locking, timing and sensitivity of
the automatic lighting, direction
indicators motorway function,
etc.):
F1 - to scroll up the list,
F2 - to scroll down the list,
F3 - to reinitialise all of the settings
(manufacturer’s settings).
Press each setting to select or
change the parameters.
G - Choose to adjust the contrast of the
display in relation to the exterior
light (day, night or automatic).
H - Choose to activate or deactivate
the traffi c information (TP).

Page 206 of 216

AB
A2A1
A3
B1B2
B3B4
B5B6B7B8
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
203
INFORMATION
A - Consult the system information:
A1 - the software version,
A2 - the map data version,
A3 - the system information database version.
To update the versions, insert
the DVD containing the new data
and follow the instructions on the
screen.
B - Consult the GPS information:
B1 - the satellite positions diagram with the direction of movement of the
vehicle. Plus the position of the
satellite signal receivers,
B2 - the name of the current location,
B3 - the longitude and latitude of the current location,
B4 - the position measurement status (2D=3 satellites or fewer, 3D=4
satellites or more),

B5 - the number of receiving satellites,
B6 - to have north at the top of the
map,

B7 - to have the direction of the vehicle
at the top of the map,

B8 - to pivot the map from overhead or
change the angle of the map.
System version, satellite

Page 207 of 216

D
C
D1D2D3
D4D5
D6D7D8
D7
D9D10D11D12
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
204
Calendar, trip These double arrows permit
access to the driving information
screen, previous or next.
D - Consult the driving information:

D1 - the average speed,
D2 - the average consumption,

D3 - the current consumption,

D4 - for speed and consumption
graphs in 5 minute intervals,
D5 - choose an automatic reini- tialisation (key at off for more
than 4 hours) or manual
reinitialisation (press reset),

D6 - the distance which can still be
travelled (in relation to the fuel
remaining and the recent aver-
age consumption),
D7 - the distance travelled since the fuel tank was last fi lled (press
refuel to reinitialise),

D8 - the driving time (dura-
tion between the key being
turned to on then to off).
- press start to measure intermediate times with:

D9 - the duration,
D10 - the distance,
D11 - the speed,

D12 - the consumption.
C - Make a note on the calendar of
special days, birthdays, etc.
Use the arrows to fi nd a date
and press directly on the day
required to enter the event.

Page 208 of 216

G
EFF1F2
F3F4
F5
F6
E1
E2
E3
G1G2
G3
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
205

F - Consult the air conditioning
conditions:
F1 - the fan speed indicator,
F2 - the air selection indicator,
F3 - the windscreen demisting indicator light,
F4 - the air conditioning indicator,

F5 - the rear screen demisting
indicator light,
F6 - the AUTO mode indicator.

E - Consult the environment
information:

E1 - the altitude,

E2 - the atmospheric pressure,
E3 - the exterior temperature. The ice
symbol fl ashes if there is a risk
of ice.

G - Make and receive telephone
calls:
G1 - enter the telephone number,
G2 - delete a character,

G3 - make the call.
Refer to the hands-free telephone
section to connect your Bluetooth ®

mobile telephone.
Environment, air conditioning,
telephone

Page 209 of 216

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
206
HANDS-FREE TELEPHONE
What is the Bluetooth® hands-free telephone with voice
recognition?
The system uses wireless communication technology referred to as
Bluetooth® which allows you to make hands-free telephone calls in
SPEAK
Pressing activates the voice recognition (“Listening” is displayed).
During voice recognition, a brief press pauses this recognition.
An extended press deactivates the recognition.
A brief press will activate the recognition even if a telep hone call is
progress.
Increasing of the audio volume.
PICK UP
Press to answer an incoming call.
If a second incoming call is received,
press this button to place the fi rst
call on hold and speak to the second
caller.
In this case, a brief press switches
between callers.
To establish a three-way conver-
sation, press the SPEAK button to
switch to voice recognition mode and
say “Incorporate the call”.
HANG UP
Press to reject an incoming call.
During a call, pressing ends this call.
General notes
Decreasing of the audio volume. Audio system on/off. your vehicle via your Bluetooth® com-
patible mobile telephone.
It has a voice recognition function which
allows you to make telephone calls us-
ing a microphone, located in the courte-
sy light, and also by means of easy use
of the steering wheel controls or using
voice commands. Five languages are
available: English (by default), Spanish,
French, German and Italian.

Page 210 of 216

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
207
Changing the language,
programming the voice
Changing the language of the voice
commands
By default, the recognition system is in
English. Programming the user’s voice
You can use the user’s voice programming
function to create a voice model for one
person per language.
The characteristics of your voice and
your pronunciation are recorded in this
model for improved voice recognition.
It is essential that the vehicle is parked
in a safe place, with the handbrake
applied.
Switch off your telephone during the
process to avoid any interruption.
1 - Press the SPEAK button. 5 - The system says the fi rst of 45
typical phrases.
If you do not start the programming
process within approximately 3 min-
utes after pressing the SPEAK but-
ton, the process is cancelled.
If you press the SPEAK button with-
in 5 seconds following the reading of
a voice command, the recording of
this command is repeated.
1 - Press the SPEAK button.
2 - Say “Setup”.
3 - Say “Language”.
5 - Say the language of your choice in English, example:
say “French” for French.
7 - Say “Yes” to start the change of language process or say
“No” to return to steps 4 to 7.
8 - The system repeats the language chosen and completes the change
of language process. 2 - Say “Word training”.
4 - When you are ready to start, press and hold the SPEAK
button. 6 - Repeat each phrase in the
table on the next page.
The system records your voice and
moves on to the recording of the next
command.
Continue the process until all of the
phrases have been recorded.
4 - The system says “Select a language: English, Spanish, French, German
or Italian”.
6 - The system then says “French selected. Is this correct?”
3 - An explanation message is given. 7 - After reading all the voice commands,
the system says “The word enrolment
is complete” and ends the process.

Page:   < prev 1-10 ... 161-170 171-180 181-190 191-200 201-210 211-220 next >