change CITROEN C1 2021 Owner's Manual

Page 151 of 269

149
C1_en_Chap07_info-pratiques_ed01-2016
The brake fluid level should be close to   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
Topping-up the engine oil
Oil grade
The  oil   must   be   the   correct   grade   for   your  
e

ngine   and   conform   to   the   manufacturer's  
r

ecommendations.
Refer
  to   the   under-bonnet   view   for   the   location  
o

f   the   oil   filler   cap   on   your   vehicle.
F

U
nscrew the filler cap for access to the
filler
  orifice.
F
 
P
our   in   the   oil   in   small   quantities,   avoiding  
s

pills   onto   the   engine   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
T
op-up   again   if   necessary.
F
 
A
fter   checking   and   topping   up,   carefully  
r

efit   the   oil   filler   cap   and   the   dipstick   to   its  
h

ousing.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd   emissions   control   system,   never   use  
a

dditives   in   the   engine   oil.
7
Practical information

Page 153 of 269

151
C1_en_Chap07_info-pratiques_ed01-2016
Checks
12 V battery
The battery does not require any maintenance.
H owever,   check   regularly   that   the   terminals a

re   correctly   tightened   (versions   without   quick
 r

elease   terminals)   and   that   the   connections
 a

re   clean.Refer to the manufacturer's service   schedule   for   details   of   the  
r

eplacement   intervals   for   these  
c

omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
Oil filter
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise,   have   them   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
Depending
  on   the   environment   (e.g.   dusty  
a

tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.
When
  carrying   out   any   operation   on   the  
12
  V   battery,   refer   to   the   corresponding   section  
f

or   details   of   the   precautions   to   be   taken   before  
s

tarting   work.
Manual gearbox
The gearbox does not require any maintenance   (no   oil   change).
Refer
  to   the   manufacturer's   service  
s

chedule   for   the   checking   interval   for  
t

his
 c
omponent.
Clutch
The clutch is operated mechanically and requires r egular a djustment.
Refer
  to   the   manufacturer's   service   schedule  
f

or   information   on   when   the   adjustment   should  
be c

hecked.In
  the   event   of   an   operating   fault  
(

difficulty   moving   off,   for   example),  
c

ontact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Versions
 
equipped
 
with
 
Stop
 
&
 
Start
 
are
 
f

itted
 
with
 
a
 
12
 
V
 
lead-acid
 
battery
 
of
 
s

pecific
 t

echnology
 a

nd
 s

pecification.
Its
 
replacement
 
should
 
be
 
carried
 
out
 
o

nly
 

by
 

a
 

CITROËN
 

dealer
 

or
 

a
 

qualified
 w

orkshop.
7
Practical information

Page 154 of 269

152
C1_en_Chap07_info-pratiques_ed01-2016
ETG gearbox
The ETG gearbox does not require any   maintenance   (no   oil   change).
Refer
  to   the   manufacturer's   service  
s

chedule   for   information   on   when   this  
u

nit   should   be   checked.
Brake
  wear   depends   on   the   style  
o

f   driving,   particularly   in   the   case  
o

f   vehicles   used   in   town,   over   short  
d

istances.   It   may   be   necessary   to  
Brake pads
For information on checking brake disc   wear,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop.
Brake disc wearOnly use products recommended by CITROËN   or   products   of   equivalent  
q

uality
 an
d
 sp
ecification.
In
  order   to   optimise   the   operation   of  
u

nits   as   important   as   those   in   the  
b

raking   system,   CITROËN   selects   and  
o

ffers   very   specific   products.
After
  washing   the   vehicle,   dampness,  
o

r   in   wintry   conditions,   ice   can   form  
o

n   the   brake   discs   and   pads:   braking  
e

fficiency   may   be   reduced.   Make   light  
b

rake   applications   to   dry   and   defrost  
t

he   brakes.
Parking brake
If excessive travel or a loss of effectiveness   of   this   system   is  
n

oticed,   the   parking   brake   must   be  
c

hecked,
 e
ven
 b
etween
 t
wo services.
Checking
 
this   system   must   be   done   by   a  
C

ITROËN
  dealer   or   a   qualified   workshop.
have
 
the
 
condition
 
of
 
the
 
brakes
 
checked,
 
even
 
b

etween
 v

ehicle
 s

ervices.
Unless
 
there
 
is
 
a
 
leak
 
in
 
the
 
circuit,
 
a
 
drop
 
in
 
t

he
 
brake
 
fluid
 
level
 
indicates
 
that
 
the
 
brake
 
p

ads
 
are
 
worn. To
  avoid   damaging   the   electrical   units,  
n

ever use   a   high   pressure   jet   wash   in  
t

he   engine   compartment.
Practical information

Page 160 of 269

158
C1_en_Chap08_en-cas-pannes_ed01-2016
Spare wheel
F As  far   as   possible,   immobilise   the   vehicle  o
n   level,   stable,   non-slippery   ground.
F
 
A
pply   the   parking   brake.
F
 
S
witch   off   the   ignition   ("OFF "
  mode   for  
v

ehicles   fitted   with   "Keyless   Entry   and  
S

tarting").
F
 
E
ngage   first   gear   or   reverse   for   a   manual  
g

earbox.
F
 
P
lace   the   gear   selector   at   position   N for an
ETG
  electronic   gearbox.
Parking the vehicle
Procedure for replacing a wheel with a damaged tyre by the spare wheel using the tools supplied with the vehicle.
F  
I
f   necessary,   chock   the   wheel   diagonally  
o

pposite   the   wheel   to   be   changed.
F
 
Y
ou   must   ensure   that   the   occupants   leave  
t

he   vehicle   and   wait   in   a   safe   location.
In the event of a breakdown

Page 166 of 269

164
C1_en_Chap08_en-cas-pannes_ed01-2016
Direction indicators
(PY 21W amber)
Sidelamps (W5W)
F Turn
  the   bulb   holder   one   quarter   of   a   turn  a
nd   remove   it.
F
 
R
emove   the   bulb   and   change   it.
If
  you   encounter   any   difficulties,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
F
 T
urn
 
the
 
bulb
 
holder
 
one
 
quarter
 
of
 
a
 
turn
 a
nd
 
remove
 
it.
F
 
R

emove
 
the
 
bulb
 
and
 
change
 
it.
Dipped beam headlamps
(H7 - 55W)
F Remove   protective   cover   by   pulling   on  t
he tag.
F
 
S
pread   the   spring   to   free   the   bulb   holder.
F
 
R
emove   the   bulb   holder   and   change   the  
b

ulb.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
If
  you   encounter   any   difficulties,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
In the event of a breakdown

Page 167 of 269

165
C1_en_Chap08_en-cas-pannes_ed01-2016
Main beam headlamps (H7-55W)
F Remove  protective   cover   by   pulling   on  t
he tag.
F
 
S
pread   the   spring   to   free   the   bulb   holder.
F
 
R
emove   the   bulb   holder   and   change   the  
b

ulb.
To
 
r
eassemble,  
c
arry  
o
ut  
t
hese  
o
perations  
i
n  
r

everse
 o
rder.
If
  you   encounter   any   difficulties,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
LED daytime running lamps
For the replacement of these lamps, contact a CITROËN   dealer   or   qualified   workshop.
8
In the event of a breakdown

Page 168 of 269

166
C1_en_Chap08_en-cas-pannes_ed01-2016
1. Brake  lamps   (P21/5W)
2. S idelamps ( P21/5W)
3.
 D

irection   indicators   (PY21W)
4.
 R

eversing   lamp   (P21W),   near   side
 F

oglamp   (P21W),   offside
Rear lamps
These bulbs are changed by removing the lamp unit:
F
 
O
pen   the   boot.
F
 
T
ip   the   plastic   cover   and   remove   the   screw.
F
 
M
ove   the   boot   trim   firmly   aside.
 D

eformation   of   the   trim   is   normal.
F
 
U
nscrew   the   nut   and   remove   it   (take   care  
n

ot   to   drop   it   in   the   wing).
F
 
R
emove   the   lamp   unit   by   pulling   it   firmly  
o

utwards. F
 A t   the   back   of   the   lamp,   remove   the   failed  
b

ulb   and   change   it.
When
  refitting,   proceed   in   the   reverse   order,  
t

aking   care   to   position   the   lamp   unit   correctly.
In the event of a breakdown

Page 169 of 269

167
C1_en_Chap08_en-cas-pannes_ed01-2016
Number plate lamps (W5W)
F Insert  a   thin   screwdriver   into   one   of   the  c
utouts   in   the   the   lens.
F
 
P
ush   it   outwards   to   unclip   it.
F
 
R
emove   the   lens.
F
 
C
hange   the   faulty   bulb.
Third brake lamp
(4 W5W bulbs)
F With  the   boot   open,   unclip   the   plastic   cover.
F  P ress   the   metal   clips   to   disengage   the   lamp.
F
 
R
emove   the   lamp   via   the   exterior   of   the  
t

ailgate.
F
 
R
emove   the   bulb-holder   by   squeezing   the  
p

lastic   catches.
F
 
C
hange   the   failed   bulb(s).
Direction indicator side repeaters
(WY 5W amber)
F Push  the   repeater   for wards   or   rear wards  a
nd   detach   it   by   pulling   towards   you.
F
 
D
isconnect   the   bulb   holder   and   change   it.
To
 
refit,
 
press
 
on
 
the
 
lens
 
to
 
clip
 
it
 
in
 
place. To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown

Page 190 of 269

188
C1_en_Chap10a_ Autoradio-Toyota-tactile-1_ed01-2016
Steering mounted controls
Change multimedia source.
P ress   and   hold:   mute   /   restore  
s

ound   from   the   radio   or   pause   media  
s

ources. Increase
  volume.
Decrease   volume.Reject
  the   incoming   call.
End
  the   call   in   progress.
Other
  than   on   a   call:   press   to   return  
t

o   the   radio   screen   or   the   clock   if   the  
r

adio   is   not   active.
Radio:
  change   to   preset   radio  
s

tations   in   ascending   order.
Media:   next   track.
Radio:   change   to   preset   radio  
s

tations   in   descending   order.
Media:   previous   track.
Accept   an   incoming   call.
Other   than   on   a   call:   press   to   open  
t

he   list   of   contacts;   a   second   press  
o

pens   the   calls   history.
A

Page 193 of 269

191
C1_en_Chap10a_ Autoradio-Toyota-tactile-1_ed01-2016
Level 1Level 2 Level 3 Comment
Audio source FM FM
radio
configuration Update
  the   list   of   stations Update   the   list   to   take   account   of   reception.
List of stations Choose
  to   list   by   "Broadcaster"   or   "Alphabetic".
FM
  traffic   announcementsActivate
  or   deactivate   options.
FM
  alternative   frequencies
Change
 r

egional
 c
ode
FM
  radiotext
Presets List
  of   preset   stations.
Stations List
  of   radio   stations   received.
Manual Search for stations step by step or
automatically.
Audio source
AM Presets
List
  of   preset   stations.
Manual Search for stations step by step or
automatically.
Audio source DAB DAB radio
configuration
Update
  the   list   of   stations Update   the   list   to   take   account   of   reception.
L- B a n d
Activate
  or   deactivate   options.
DAB
  traffic   announcements
DAB
  alternative   frequencies
DAB
  radiotext
Presets List
  of   preset   stations.
Stations List
  of   radio   stations   received.
Manual Search for stations step by step or
automatically.
.
Audio and Telematics

Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >