Citroen C4 PICASSO 2010.5 1.G Service Manual

II
44
M U L T I F U N C T I O N S C R E E N S
MONOCHROME SCREEN A
Displays in the screen
This screen can display the follow-
ing information:
- time
- date
- ambient temperature
When the ambient temperature is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the ve-
hicle is parked in the sun.
- the current audio source,
- trip computer (see the end of the section).
Alert messages (e.g.: "Antipollution
system faulty") or information mes-
sages (e.g.: "Boot open") may appear
temporarily. They can be removed by
pressing "ESC" .
A. Access to the "Main menu".

B. Navigation in the screen menus

C. Confi rmation of the selection of a
function in a menu or of a value
modifi ed

D. Cancellation the current operation.

E. Selection of the type of infor-
mation (date, audio-CD and trip
computer)

B or F. In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of settings.
 Press button A , then using B ,
you have access to the following
menus:
- radio-CD
- vehicle confi g
- options
- display adjust
- languages
- units

 Press button C to confi rm.
Controls Main Menu
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

II
45
M U L T I F U N C T I O N S C R E E N S Vehicle config
Options
This menu is used for diagnosis of
the state of systems (active, inac-
tive, faulty).
Radio-CD
With the Audio system on, you can
activate or deactivate functions of
the radio (RDS station tracking,
REG mode), CD or CD changer (CD
introscan, shuffl e, repeat).
For more information on the
"Radio-CD" application, refer to the
Audio system section in "Audio et
Telematics". Display adjust
The "Display adjust" menu is used
for the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Languages
You can select the screen dis-
play language (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).
Units
This menu is used to select the units
for temperature (°C or °F) and fuel
consumption (l/100 km, mpg or km/l).
* Depending on destination country.
The "Vehicle confi g" menu is used
to activate/deactivate the following
functions:
- rear wiper coupled to reverse gear (refer to the "Visibility" section),
- guide-me-home and welcome lighting (refer to the "Visibility"
section),
- automatic functions (application/ release) of the electric parking
brake * ,
- selective door locking,
- daytime running lamps (refer to the "Visibility" section).

II
46
M U L T I F U N C T I O N S C R E E N S
MONOCHROME SCREEN C Main Menu
Displays in the screen Controls
This screen can display the follow-
ing information:
- time
- date,
- ambient temperature
When the ambient temperature is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the ve-
hicle is parked in the sun.
- the current audio source
- trip computer (see the end of the section),
- visual parking sensors.
Alert messages (e.g.: "Antipollution
system faulty") or information mes-
sages (e.g.: "Boot open") may appear
temporarily. They can be removed by
pressing "ESC" . For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

A. Access to the "Main Menu"

B. Navigation in the screen menus

C. Selection and confi rmation in the
menus of the function chosen or
the value modifi ed

D. Cancellation of the current op-
eration

E. Selection of the type of informa-
tion (date, radio-CD/audio, tel-
ephone and trip computer).

B or F. In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of settings.
 Press button A , then using B ,
you have access to the following
menu:
- audio functions,
- trip computer,
- personalisation-confi guration,
- Bluetooth telephone (hands-free system).

 Press button C to confi rm.

II
47
M U L T I F U N C T I O N S C R E E N S
Warning log
This lists alert messages, displaying
them successively on the multifunc-
tion screen.
Audio functions
Trip computer
Bluetooth telephone
(hands-free system)
You can see information on the state
of the vehicle.
With the Audio system on, you can
activate or deactivate functions as-
sociated with the radio (RDS, REG,
Radio Text), CD or CD changer (CD
introscan, shuffl e, repeat).
For more information on the "Audio
functions" application, refer to the
Audio system section in "Audio and
Telematics". With the Audio system on, you can
confi gure your Bluetooth hands-free
system (pairing), view the various
telephone directories (calls log, serv-
ices..) and manage calls (call, hang
up, double call, secret mode...).
For more information on the
"Telephone" application, refer to the
Audio system section in "Audio and
Telematics".
Status of functions
This allows diagnosis of the state of
systems (active, inactive, faulty).
Enter the distance to destination
You can enter a value for the dis-
tance to your fi nal destination.

II
48
M U L T I F U N C T I O N S C R E E N S
Choice of language
You can change the screen dis-
play language (Deutsch, English,
Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Türkçe * ).
* Depending on destination country.
This menu is used to activate/deac-
tivate the following functions:
- defi ne the vehicle parameters,
- display confi guration,
- choice of language. Defi ne the vehicle parameters
You can activate or deactivate the
following systems:
-
rear wiper coupled with reverse
gear (refer to the "Visibilty" section),
- automatic guide-me-home lighting,
- directional headlamps,
- automatic functions (application/
release) of the electric parking
brake *
- selective door locking,
- daytime running lamps (refer to the "Visibilty" section),
Display confi guration
You can make the following adjust-
ments:
- video brightness,
- date and time,
- choice of units.
Personalisation -
Configuration

II
49
M U L T I F U N C T I O N S C R E E N S
MYWAY MULTIFUNCTION SCREEN
This screen can display the follow-
ing information:
- time,
- date,
- ambient temperature
When the ambient temperature is between +3 °C and -3 °C,
the display fl ashes (risk of ice).
The temperature displayed may
be higher that the actual tem-
perature if the vehicle has been
parked in the sun.
-
warning and vehicle function status
messages, displayed temporarily,
- audio functions,
- trip computer (see the end of the section),
- visual parking sensor information,
- satellite navigation system infor- mation. Controls
Displays in the screen
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.
You can press:

A. Opens a contextual menu.

B. Navigation through the screen
menus.

C. Confi rmation of the selection
made in a menu or a modifi ed
value.

D. Abandon the current operation.

E. Selection of main display (date,
radio-CD/audio, telephone, map,
navigation and trip computer).

B or F.
In the menus, navigation, se-
lect activation/deactivation of
functions and select settings.
To select one of the applications:

 press the dedicated "RADIO" ,

"MUSIC" , "NAV" , "TRAFFIC" ,

"SETUP" or "PHONE" button to
open the corresponding menu,
For more information on these ap-
plications, refer to the "Audio and
Telematics" section.
Menus in the control panel

II
50
M U L T I F U N C T I O N S C R E E N S
SETUP menu

 Press the "SETUP" button to
open the confi guration menu.
This allows you to select from
the following functions:
- "System language",
- "Date and time",
- "Display",
- "Vehicle",
- "Units",
- "System".
System language
This menu allows you to select
the language used by the dis-
play: Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Türkçe * .
* According to country.
Date and time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio and Telematics" section).
Display
This menu allows you to set the
brightness of the screen, the screen
colour scheme and the colour of the
map (day/night or auto mode).
Vehicle
This menu allows you to activate or
deactivate certain driving and com-
fort equipment:
- wiper linked with reverse gear
(refer to the "Visibility" section),
- guide-me-home and welcome lighting (refer to the "Visibility"
section),
- directional headlamp lighting (re- fer to the "Visibility" section),
- interior mood lighting (refer to the "Visibility" section),
- electric parking brake automatic functions (automatic application/
release) * ,
- selective door locking,
- daytime running lamps (refer to the "Visibility" section), Units
This menu allows you to select the
units: temperature (°C or °F) and
consumption (km/l, l/100 or mpg).
System
This menu allows you to restore the
factory confi guration, display the soft-
ware version and activate scrolling
text.

II
51
M U L T I F U N C T I O N S C R E E N S
NAVIDRIVE MULTIFUNCTION SCREEN
Displays in the screen
The screen can display the following
information:
- time
- date
- ambient temperature
When the ambient temperature is between +3 °C and -3 °C, the
temperature display fl ashes (risk
of ice). The ambient temperature
displayed may be higher than
the actual temperature if the ve-
hicle is parked in the sun.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary. Controls

A. Access to the "Main Menu"

B. Navigation in the screen menus

C. Selection and confi rmation in the
menus of the function chosen or
the value modifi ed.

D. Cancellation of the current op-
eration or return to the previous
display.

E. Selection of the principal dis-
play (date, radio-CD/audio, tele-
phone, map, navigation and trip
computer).

B or F. In the menus, navigation,
choice of activation/deactiva-
tion of functions and choice
of setting.
- alert messages and state of ve-
hicle systems, displayed tempo-
rarily
- audio functions,
- trip computer (see end of the section),
- visual parking sensors,
- satellite navigation system infor- mation.

II
52
M U L T I F U N C T I O N S C R E E N S
Main Menu

Traffi c Information

Navigation/Guidance

Map

Audio Functions

Telematics

Confi guration,
to confi gure the screen
(date, time...) and defi ne ve-
hicle parameters

Video

Vehicle Diagnostics
- "Alert log",
- "Status of functions".
Press button
A to display the "Main
Menu":
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).
Monochrome screen A
Information displays
 Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.

 The next press then returns you
to the normal display.

 Press the button, located at the
end of the wiper stalk , to display
the various items of trip computer
data in succession.

II
52
M U L T I F U N C T I O N S C R E E N S
Main Menu

Traffi c Information

Navigation/Guidance

Map

Audio Functions

Telematics

Confi guration,
to confi gure the screen
(date, time...) and defi ne ve-
hicle parameters

Video

Vehicle Diagnostics
- "Alert log",
- "Status of functions".
Press button
A to display the "Main
Menu":
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).
Monochrome screen A
Information displays
 Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.

 The next press then returns you
to the normal display.

 Press the button, located at the
end of the wiper stalk , to display
the various items of trip computer
data in succession.