Citroen C4 PICASSO DAG 2007.5 1.G User Guide

A9
0
IN BRIEF
I
14
G E T T I N G S T A R T E D
Adjusting the seat belt
height
To adjust the seat belt, pinch the
control and slide it in the direction
required.Electric windows
controls
From the driver’s seat position,
the controls located on the door
enable the electric windows to be
controlled. Sliding sun visors
- Slide the blind on the visor to the
desired position by pushing the
area A.
The blinds are extended on the
sun visor struts.
- Fold the visor downwards, to protect against being dazzled.
Panoramic glass roof blind
Opening (positions 1 to 9)
Closing (position 0)
The blind has an anti-pinch de -
vice.
 86 97
 87

4
3
2
1
AB
3
2
1
0
4
A
B
C
D
E
F
IN BRIEF
I
15
D R I V I N G
LIGHTING CONTROL
Ring A
1
Off
2 Automatic lighting
3 Sidelamps
4 Dipped beams / Main
beams
Ring B
Front foglamps
Rear foglamps Windscreen wiper
3
Rapid wipe.
2 Normal wipe.
1 Intermittent wipe.
0 Off.
4 Automatic wipe by pressing
downwards, and single wipe.
Note : To deactivate automatic wipe :
- go to position 1, then return to
position 0.
Rear screen wipe Stop.
Intermittent.
Timed wash and wipe. A
Warning lamps for vehicle
lamps and direction indicators
B Audio system controls
C Multifunction display
controls
D Horn
E Optional function controls
F Cruise control and speed
limiter
 80
 82-88

+–
IN BRIEF
I
16
D R I V I N G
(6-Speed) electronic gearbox
system
R Reverse
N Neutral
A Automatic mode
M Manual mode
Using control levers + and - :
- Gear changing in manual mode
- Temporary manual operation in automatic mode.
To start
(6-Speed) electronic gearbox
system
- Check that you are in neutral (position N).
- Press firmly on the brake pedal and turn the ignition key. Position
selector Position
selector
Automatic gearbox
P Park
R Reverse
N Neutral
D Automatic mode
M Sequential mode
Using control levers + and - :
- Gear changing in sequential mode
- Temporary manual operation in automatic mode.
To start
Automatic gearbox
- Check that you are in position P
or N and turn the ignition key.
Note : To exit position P, press on
the brake pedal before moving the
selector.
Control
Control
 58-62 63-66
Position selector

A
A
IN BRIEF
I
17
D R I V I N G
Electronic parking
brake
This device combines :
- automatic functions :
Automatic application when the
engine stops and automatic re -
lease on use of the accelerator
(automatic operation by default) ;
- manual use :
Permanent manual application / release of parking brake is pos -
sible by pulling control A.
 68-74
Hill start assist
To aid starting on a gradient, your
vehicle is equipped with a system
which keeps it immobilised for
about 2 seconds, the approximate
time it takes to move your foot
from the brake pedal to the accel -
erator pedal.
 75 Navidrive Multifunction

display
Before leaving the vehicle,
check that the electronic
parking brake warning lamp P (red) is permanently on.
If you leave the vehicle with
the engine running, manually
apply the parking brake.
Never leave a child alone
inside the vehicle with the
ignition on,
as they could release the
parking brake. Parking space sensor
You can select the « parking space sen
-
sor » function by pressing on button A.
Once the space has been measured, the
function displays the following messages :
Warning
lamps displayWarning
lamps displayInstrument panel
Multifunction display
Instrument panel
< 20 km/h
(approx. 12 mph)
Parking possible
Parking difficult
Parking not advised
 32-33
 34 76-77

IN BRIEF
I
18
Air recirculation, automatic
(depending on version) Automatic comfort
regulation
Air
conditioning Rapid deicing /
demisting of front
and rear windows and rear view mirrors
Adjustment and display of temperature
(comfort requirement)
REST function
(retention of ventilation with the engine switched off)
Adjustment
of air blower speed
Adjustment of air distributionMode of
adjustment for
rear passengers Black panel function
(extinction of air
conditioning displays and button
backlighting) Deicing /
demisting of rear screen
and rear view mirrors Adjustment
of air
blower speed
 104-110
DRIVER’S AND PASSENGER’S
CONTROL PANEL REAR PASSENGERS’ CONTROL
PANEL
V E N T I L A T I O NA u t o m a t i c a i r c o n d i t i o n i n g
With additional air conditioning
(no warm air distribution)
Temperature
adjustment

IN BRIEF
I
19
V E N T I L A T I O NH e a t i n g a n d m a n u a l a i r c o n d i t i o n i n g
Display of air distribution Adjustment of blown air
temperature
Rapid deicing / demisting
of front and rear windows and rear view mirrors
Adjustment
and display
of air blower speed
Adjustment of
air distribution Mode of
temperature
adjustment for passenger Air recirculationAir conditioning
(not available in
heating version) Deicing /
demisting of rear screen and rear view mirrors Status of temperature
adjustment (active/inactive)
Temperature adjustment
 101-103
DRIVER’S CONTROL PANEL PASSENGER’S CONTROL PANEL

A
IN BRIEF
I
20
M O N I T O R I N G
Seat belts not
fastened / unfastened
warning lamp
This warning lamp informs you if the
front passenger’s seat belt is not
fastened / unfastened and if the sec-
ond- and third-row rear passengers’
seat belts are unfastened. The lit up
positions represent the passengers
whose seat belts are not fastened /
unfastened. Locking from inside
You can use electrical central
locking or unlocking by pressing
on button
A.
If one of the doors is open or is
not closed properly, central lock-
ing will not work.
Anti-intrusion security
When starting the engine, the sys-
tem automatically locks the doors
once you reach approximately
10 km/h (approximately 6 mph). Tyre deflation
detection
This function warns you if a tyre is
deflated or punctured.
This system does not absolve
the driver of the need to regularly
check the tyre pressures.
The SERVICE warning
lamp lights up, and a ve-
hicle outline is displayed,
accompanied by a mes-
sage and a sound signal.
Deflation warning
The STOP warning lamp
lights up, and a vehicle
outline is displayed, ac-
companied by a message
and a sound signal.
Puncture

36
 98 190

AC
BA
IN BRIEF
I
21
P A S S E N G E R S A F E T Y
Deactivation of front
passenger airbag
1. Insert key into
(A) .2. Select «OFF» position.
3. Remove key.
CHILD SAFETY
Manual control
The rear doors are locked by op -
erating the lever (aperture at an
angle). ISOFIX fixing system
The 3 second-row rear seats
and the front passenger seat of
your vehicle are fitted with regu
-
lation ISOFIX anchoring points,
with 3 rings for each seat position
(A B C) .
This fixing system is designed for
children weighing up to 18 kg.
Electric control
Pressing on the button prohibits
operation of the electric windows
and opening of the rear doors from
the rear of the vehicle.
 123
 124
 128

A
B
C
D
22
II
R E M O T E C O N T R O L
Central unlocking
- A short press on button B un-
locks your vehicle.
The unlocking is confirmed by the
flashing of the direction indicators,
and by the disarming of the alarm
if the vehicle has one
.
The unlocking activates:
- the deployment (to the last po- sition registered) of the exterior
rear view mirrors,
- the direction indicator side re- peaters (located underneath the
exterior rear view mirrors),
- the timed lighting of the interior lamps and the sill lighting for
around 30 seconds,
- the timed lighting of the exterior side lighters (located underneath
the exterior rear view mirrors) for
around 30 seconds. It is dangerous to operate the deadlocking when someone
is
inside the vehicle because it is impossible to unlock the vehicle
from the inside (without the remote control).
When you are closing the windows and/or the panoramic glass
roof blind with the remote control, you must make sure tha t
no-one is obstructing them from closing properly.
Note : if none of the doors is
opened within thirty seconds fol-
lowing unlocking, the doors auto-
matically relock.
Central locking - Deadlocking
- A short press on button
A locks
your vehicle.
- A long press on button A also
closes the windows and the pan-
oramic glass roof blind.
The locking is confirmed by the
continuous lighting of the direction
indicators and the arming of the
alarm.
The locking activates:
- folding of the exterior rear view mirrors,
- operation of the guide-me-home lighting, if it is activated,
- the exterior side lighters. If any of the doors, or the boot, is
open or not properly closed, a re-
bound sound signals to you that it
is impossible to lock the vehicle.
For vehicles equipped with dead-
locking
, two successive presses
on button A deadlock the vehicle.
It is then impossible to open the
doors either from the inside or from
the outside.
Selectivity of doors
If you have selected « driver » in
the « access to the vehicle » menu
of the multifunction screen :
- a press on button B opens the
driver’s door,- a second press opens all the doors.
This function is not available using
the key.

II
23
R E M O T E C O N T R O L
Guide-me-home lighting
A press on button
C operates the
guide-me-home lighting (lighting
of the sidelamps, dipped beams,
number plate lamps and side light-
ers (located underneath the exte-
rior rear view mirrors).
A second press before the end of
the timing cancels the guide-me-
home lighting.
Vehicle location
To locate the vehicle on a carpark,
press button A. The location of the
vehicle is revealed by :
- the flashing of the direction indi- cators and side repeaters for a
few seconds,
- the lighting of the interior lamps for around 30 seconds,
- the lighting of the side lighters.
The vehicle remains locked.
Foldaway and ejection of the
key
Button D folds the key in and out of
its housing in the remote control.
If you do not press on button D, you
could damage the mechanism. Simultaneous use of other high frequency equipment
(mobile telephones, domestic alarms, etc.) may interfere temporarily with the operation of the remote control. If it
malfunctions on a permanent basis, you must re-initialise the
remote control.
Except for re-initialisation, the remote control cannot functio n
while the key is in the ignition, even with the ignition switched off.
Be aware that an inadvertent manipulation of
the remote control in your pocket could cause the vehicl e doors
to unlock without your knowledge.
However, if no door is opened within thirty seconds
following an unlocking, the doors will automatically re lock.
Warning : there is a risk of damage if the replacement battery is not in conformity.
Use only those batteries that are identical or equivalent
to those recommended by CITROËN.
Remote control battery spent
This information is given by a message on the multi
function screen, accompa-
nied by a sound signal and the lighting of the SERV ICE warning lamp.
Changing the remote control battery
Detach the housing to access the battery.
Battery : CR 0523, 3V.
Re-initialising the remote control
After a change of battery, it is necessary to re-initialise the remote control.
For that, switch on the ignition and immediately press butto n A on your
remote control until the action desired is triggered. This manœ uvre may
take some ten seconds.
Note : Make a careful note of the numbers for your keys and remote con-
trol on the ASSISTANCE card. Keep this in a safe place.
Do not throw away spent batteries. Return them to a CITROËN dealer
or to an approved collection point (photo shops, etc.).