Citroen C4 PICASSO RHD 2014.5 1.G Owner's Manual

Page 251 of 428

249
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
  the   case   of   universal   and   semi-universal   ISOFIX   child   seats,   the   ISOFIX   size   category,   determined   by   a   letter   from   A to G,
  is   indicated   on   the   child  
s

eat   next   to   the   ISOFIX   logo.
*
  Sleeper   cots   cannot   be   fitted   to   the   front   passenger's   seat.**
  
A
n   ISOFIX   sleeper   cot,   secured   to   the   lower   rings   of   an   ISOFIX   seat,  
o

ccupies   the   full   width   of   the   rear   seats.
Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up
  to   approx.  
6 m

onthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   approx.   1   yearFrom 9 to 18 kg (group 1)
From
  approx.   1   to   3   years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
 p

assenger
 sea
t
n
ot IS
o
FIX
Outer
  rear   seats,   fixed IL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Outer
 r

ear
 s
eats,
 a
djustable
 l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
Rear
  seat   in   the   3
rd rown ot ISo FIX
6
Safety

Page 252 of 428

250
I UF: seat suitable for the installation of an
ISoFI X Universal seat, " For ward
  facing"  
s

ecured   using   the   upper   strap   to   the   top   tether  
o

n   ISOFIX   seats.
IL- SU: seat suitable for the installation of an
I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-
 
a
  sleeper   cot   fitted   with   an   upper   strap   or   a  
s

upport   leg. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
For
  advice   on   securing   the   upper   strap,   refer   to  t
he   "Isofix   Mountings"   section.
X: seat not suitable for the installation of a
child
  seat   or   sleeper   cot   for   the   weight   group  
i

ndicated.
Safety

Page 253 of 428

251
Child seats
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection   in  
t

he   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harnesses   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
For
  the   installation   of   a   child   seat   using   a  
s

eat   belt,   ensure   that   this   is   well   tensioned  
o

n   the   child   seat   and   that   it   is   holding   the  
c

hild   seat   firmly   against   the   seat   of   your  
v

ehicle.   If   your   front   passenger   seat   is  
a

djustable,   move   it   for ward   if   necessary.
at t

he rear seats, always leave sufficient
space
  between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   feet   of   a   child   seated   in   a   for ward  
f

acing   child   seat.
Recommendations
For this, move the front seat for ward and if necessary   straighten   its   backrest.
For
 o

ptimum
 in
stallation
 o
f
 t
he
 fo
rward
 f
acing
 c

hild   seat,   ensure   that   the   back   of   the   child  
s

eat   is   as   close   as   possible   to   the   backrest  
o

f   the   vehicle's   seat,   or   in   contact   if   possible.
The
  head   restraint   must   be   removed   before  
i

nstalling   a   child   seat   with   a   backrest   on   the  
p

assenger
 sea
t.
Ensure
  that   the   head   restraint   is   stowed   or  
a

ttached   securely   so   that   it   is   not   thrown  
a

round   the   vehicle   in   the   event   of   sharp  
b

raking.
Refit
  the   head   restraint   as   soon   as   the   child  
s

eat   is   removed.Installing a booster
cushion
As a safety precaution, do not leave:
-  o ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   child   lock.
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
The
  chest   part   of   the   seat   belt   must   be  
p

ositioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes   correctly   over   the   child's   thighs.
CITROËN   recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
The
 
legislation
 
on
 
carrying
 
a
 
child
 
on
 
the
 
f

ront
 
passenger
 
seat
 
is
 
specific
 
to
 
each
 
c

ountry.
 
Refer
 
to
 
the
 
legislation
 
in
 
force
 
in
 
t

he
 
country
 
in
 
which
 
you
 
are
 
driving.
Deactivate
 
the
 
passenger's
 
front
 
airbag
 
w

hen
 
a
 
rear ward
 
facing
 
child
 
seat
 
is
 
installed
 
o

n
 
the
 
front
 
passenger
 
seat.
 
Other wise,
 
the
 
c

hild
 
would
 
risk
 
being
 
seriously
 
injured
 
or
 
k

illed
 
if
 
the
 
airbag
 
were
 
deployed.
Children at the front
6
Safety

Page 254 of 428

252
Child lock
This mechanical system prevents opening of the rear door using its interior control.
T he   control   is   located   on   the   edge   of   each   rear   door   and   locking   is   independent   for   each   door.
Locking
F Using  the   integral   ignition   key,   turn   the  c
ontrol   as   far   as   it   will   go:
-
 
t
o   the   left   on   the   left-hand   rear   door,
-
 
t
o   the   right   on   the   right-hand   rear   door.
Unlocking
F Using  the   integral   ignition   key,   turn   the  c
ontrol   as   far   as   it   will   go:
-
 
t
o   the   right   on   the   left-hand   rear   door,
-
 
t
o   the   left   on   the   right-hand   rear   door.
Safety

Page 255 of 428

253
This kit is  installed  i n  t he  s torage  b ox,  u nder  t he  b
oot   floor.
Complete
 
system
 
consisting
 
of
 
a
 
compressor
 
a

nd
 
a
 
sealant
 
cartridge
 
which
 
permits
 
t

emporary repair
of a tyre so that you can
drive
 
to
 
the
 
nearest
 
garage.
It
 
is
 
designed
 
to
 
repair
 
most
 
punctures
 
which
 
c

ould
 
affect
 
the
 
tyre,
 
located
 
on
 
the
 
tyre
 
tread
 
o

r
 
shoulder.
Temporary pu
ncture r epair k it
Access to the kit
Depending on version, the kit is stowed under t
he   front   passenger's   seat   or   in   the   storage  
b

ox   under   the   second   row   footwell.
7
Practical information

Page 256 of 428

254
List of tools
* Depending on equipment.
al
l of these tools are specific to your vehicle
and   can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 1
2   V   compressor.
 C

ontains   a   sealant   cartridge   for   the  
t

emporary   repair   of   a   tyre   and   can   also   be  
u

sed   for   adjusting   tyre   pressures.
2.
 C
hocks*   to   immobilise   the   wheels   of   the  
v

ehicle.
3.
 B
olt   cover   removal   tool*.
 F

or   removing   the   wheel   bolt   finishers  
(

covers)   on   alloy   wheels.
4.
 R
emovable   towing   eye.
 S

ee   the   "Towing   the   vehicle"   section.
Practical information

Page 257 of 428

255
A. "Sealant"  or   "Air"   position   selector.
B. on "
I"  /   off   "O" s witch.
C.
 D

eflation   button.
D.
 P

ressure   gauge   (in   bar   and   p.s.i.).
E.
 C

ompartment
 h
ousing:
-
 
a
  cable   with   adaptor   for   12   V   socket,
-
 
v
arious   inflation   adaptors   for  
a

ccessories, such as balls,
bicycle tyres...
Description of the kit
The speed limit sticker I must be affixed t o   the   vehicle's   steering   wheel   to   remind  
y

ou   that   a   wheel   is   in   temporary   use.
Do
  not   exceed   a   speed   of   50   mph  
(

80   km/h)   when   driving   with   a   tyre  
r

epaired   using   this   type   of   kit.
F.
 S

ealant
 c
artridge.
G.
 W

hite   pipe   with   cap   for   repair.
H.
 B

lack   pipe   for   inflation.
I.
 S

peed   limit   sticker.
The
 
tyre
 
inflation
 
pressures
 
are
 
given
 
on
 
this
 
lab

el.
The
 
vehicle's
 
electric
 
system
 
allows
 
the
 
c

onnection
 
of
 
a
 
compressor
 
for
 
long
 
e

nough
 
to
 
inflate
 
a
 
tyre
 
after
 
a
 
puncture
 
r

epair
 
or
 
for
 
inflating
 
a
 
small
 
inflatable
 
a

ccessory.
7
Practical information

Page 258 of 428

256
1. Sealing
Repair procedure
Avoid removing any foreign bodies which   have   penetrated   into   the   tyre.F

U
ncoil the white pipe G  
f
ully.
F  
U
nscrew   the   cap   from   the   white   pipe.
F
C
onnect the white pipe to the valve of the
tyre   to   be   repaired.
F
 
S

witch   off   the   ignition.
F

T

urn the selector A to the "sealant"
position.
F
 
C

heck   that   the   switch   B is in
position "O" . F  
C
onnect   the   compressor's   electric   plug   to  
t

he   vehicle's   12   V   socket.
F  
S
tart   the   vehicle   and   leave   the   engine  
r

unning.
Take care, this product is harmful (
e.g.   ethylene-glycol,   colophony...)   if s

wallowed   and   causes   irritation   to   the   eyes.
Keep this product out of the reach of children. Do
  not   start   the   compressor   before  
c

onnecting   the   white   pipe   to   the   tyre  v
alve:   the   sealant   product   would   be  e
xpelled   through   the   pipe.
Practical information

Page 259 of 428

257
F Switch  on   the   compressor   by   moving  t
he switch B to position "I" until the tyre
pressure
  reaches   2.0   bars.
 T

he   sealant   is   injected   into   the   tyre   under  
p

ressure;   do   not   disconnect   the   pipe   from  
t

he   valve   during   this   operation   (risk   of  
sp

lashing).
If
  after   around   5   to   7   minutes   the  
p

ressure   is   not   attained,   this   indicates  
t

hat   the   tyre   is   not   repairable;   contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   assistance. F
 R emove   the   kit   and   screw   the   cap   back   on  t
he   white   pipe.
 T

ake   care   to   avoid   staining   your   vehicle  
w

ith   traces   of   fluid.   Keep   the   kit   to   hand.
F
 
D
rive   immediately   for   approximately  
t

hree   miles   (five   kilometres),   at   reduced  
s

peed   (between   15   and   35   mph  
(20
  and   60   km/h)),   to   plug   the   puncture.
F
 
S
top   to   check   the   repair   and   the   tyre  
p

ressure   using   the   kit.
Tyre under-inflation
detection
After repair of the tyre, the warning lamp   will   remain   on   until   the   system   is  
r

einitialised.
For
  more   information,   refer   to   the  
"

Under-inflation
 d
etection"
 s
ection.
7
Practical information

Page 260 of 428

258
2. Inflation
F Turn the selector A to the "air" position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
v

alve   of   the   wheel. F
 C onnect   the   compressor's   electric   plug   to  t
he   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   again   and   leave   the  
e

ngine
 r
unning.
As
  soon   as   possible,   go   to   a   CITROËN  
d

ealer   or   a   qualified   workshop.
You
  must   inform   the   technician   that   you  
h

ave   used   this   kit.   After   inspection,   the  
t

echnician   will   advise   you   on   whether  
t

he   tyre   can   be   repaired   or   if   it   must   be  
r

eplaced.F
 A djust   the   pressure   using   the   compressor  (
to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  in   accordance   with   the  
v

ehicle's  
t
yre   pressure   label   (located   on   the  
l

eft   hand   door   aperture).  
 
A

  loss   of   pressure   indicates   that   the  
p

uncture   has   not   been   fully   plugged;  
c

ontact   a   CITROËN   dealer   or   qualified  
w

orkshop   for   assistance.
F
 
R
emove   and   stow   the   kit.
F
 
D
rive   at   reduced   speed   (50   mph   [80   km/h]  
m

ax)   limiting   the   distance   travelled   to  
a

pproximately   120   miles   (200   km).
Practical information

Page:   < prev 1-10 ... 211-220 221-230 231-240 241-250 251-260 261-270 271-280 281-290 291-300 ... 430 next >