display Citroen DS3 2011 1.G User Guide

45Monitoring






Black panel

System allowing cer tain displays to be switched
off for night driving.
The instrument panel remains illuminated with
only the vehicle speed and cruise control or
speed limiter information, if in use.
If there is an aler t or a change in a function
or to a setting, the black panel mode is
interrupted.
Activation



)
With the lighting on, press the left hand
button of the instrument panel several
times to progressively reduce the
dashboard lighting level.

)
Press the button again to reduce the
lighting to the minimum level and switch off
the interior mood lighting.

)
Press the button again to activate the black
panel.

Tr i p c o m p u t e r







Monochrome screen A


Information displays



)
Press the button, located at the end of the
wiper stalk
, to display the various items of
trip computer information in succession. The trip computer provides the following
information:


- range,

- current fuel consumption,

- Stop & Star t time counter,

- distance travelled,

- average fuel consumption,
- average speed.

)
The next press then returns you to
the normal display.

System that gives you current information on your journey (range, fuel consumption…).


Zero reset



)
Press the control for more than
two seconds to reset to zero the distance
travelled, the average fuel consumption
and the average speed.

47Monitoring





Monochrome screen C


Information displays



)
Press the button, located at the end of
the wiper stalk
, to display the various trip
computer tabs in succession.

- the current information tab
with:


●
the range,

●
the current fuel
consumption,

●
the distance remaining to
be travelled or the Stop &
Star t time counter.



- the trip "1"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the first trip.



- the trip "2"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the second trip.


)
Pressing the button again returns you to
the normal display.


16/9 colour screen (MyWay)


Trip zero reset



)
When the trip required is displayed, press
the button on the end of the wiper stalk for
more than two seconds.
Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures, and trip "2"
for monthly figures.

A few definitions…


Range

(miles or km)
This indicates the distance
which can still be travelled with the fuel
remaining in the tank in relation to the average
fuel consumption over the last few miles
(kilometres) travelled.

Current fuel consumption

(mpg or l/100 km or km/l)

This is the average fuel consumption
during the last few seconds.

Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel consumption since the
last trip computer zero reset.


Average speed

(mph or km/h)
This is the average speed calculated
since the last trip computer zero reset
(ignition on).


Distance travelled

(miles or km)
This indicates the distance
travelled since the last trip computer zero reset.









Stop & Start time
counter
(minutes /sec onds or hour s /minutes)
If your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode during a journey.
It resets to zero every time the ignition is
switched on with the key.
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop. This function is only displayed from
20 mph (30 km/h).
When the range falls below 20 miles (30 km),
dashes are displayed. After filling with at least
5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).


Distance remaining to
destination
(miles or km)
This is the distance remaining to be travelled
to the final destination. It can be entered by
the user.
If the distance is not entered, dashes are
displayed in place of the digits.

Monochrome screen A

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- status of the doors and boot,

- audio sources (radio, CD...),

- trip computer (refer to the "Instruments and
Controls" section).
Warning messages (e.g.: "Emission control
system faulty") or information messages
(e.g.: "Boot open") may appear temporarily.
These can be cleared by pressing the "ESC"

button.


Displays on the screen

From the control panel of your Audio system,
you can:


)
press the "MENU"
button to gain access to
the main

menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change
the permanent application (date, audio
source...),

)
press the " 
" or " 
" buttons to change a
setting value,

)
press the "OK"
button to confirm,
or

)
press the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button to gain access
to the main

menu
, then press the " 
" or
" 
" buttons to scroll through the various
menus:


- radio-CD,

- vehicle configuration,

- options,

- display settings,

- languages,

- units.

)
Press the "OK"
button to select the menu
required.


Main menu

Languages

Once the "Languages" menu has been selected,
you can change the language used by the display
(Français, Italiano, Nederlands, Portugues,
Portugues-Brasil, Deutsch, English, Espanol).


Units

Once the "Units" menu has been selected,
you can change the units of the following
parameters:


- temperature (°C or °F),

- fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption units have
been set to mpg, the information in the
instrument panel screen on speed and
distance will also be in mph and miles. For safety reasons, configuration by the
driver of the multifunction screen must
only be done when stationary.


Display settings

Once the "Display settings" menu has been
selected, you can gain access to the following
settings:


- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.

)
Once you have selected a setting, press
the " 
" or " 
" buttons to change its value.

)
Press the " 
" or " 
" buttons to switch
respectively to the previous or next setting.

)
Press the "OK"
button to save the change
and return to the normal display or press
the "ESC"
button to cancel.

55Multifunction screens











Monochrome screen C

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- status of doors and boot,

- audio sources (radio, CD, USB por t, jack
socket etc.),

- trip computer (refer to the "Instruments and
controls" section).
Warning messages (E.g. "Emisions control
system faulty") or information messages
(E.g.: Automatic headlamps active") may
appear temporarily. These can be cleared by
pressing the "ESC"
button.


Displays on the screen

From your Audio system control panel, you can:


)
press the "MENU"
button to gain access to
the main

menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change the
permanent application (trip computer, audio
source...),

)
press the " 
" or " 
" buttons to change a
setting value,

)
press the "OK"
button to confirm,
or


)
press the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button to gain access to
the main

menu
:


- audio functions,

- the trip computer,

- personalisation-configuration,

- telephone (hands-free kit).

)
Press the " 
" or " 
" buttons to select the
menu required, then confirm by pressing
the "OK"
button.



Main menu

With the Audio system switched on, once this
menu has been selected you can activate
or deactivate the functions linked with use
of the radio (RDS, REG, RadioText), the CD
(introscan, shuffle, CD repeat) or the MP3
player (USB por t /jack socket).
For more information on the "Audio functions"
application , refer to the Audio system par t of
the "Audio and Telematics" section.


"Au d i o f u n c t i o n s"
menu
"Trip computer" menu

Once this menu has been selected, you can
consult information concerning the status of the
vehicle (warnings log, status of functions, etc.).

Alert log

This summarises the active warning messages,
displaying them in succession on the
multifunction screen.


Status of functions

This summarises the status (active or inactive)
of the vehicle's functions.


Enter distance to destination

This allows you to enter an approximate
distance until your final destination.


)
Press the "MENU"
button to gain access to
the general menu.

)
Press the arrows, then the "OK"
button to
select the "

Tr i p c o m p u t e r

"
menu.

)
In the "

Tr i p c o m p u t e r

"
menu, select one
of the following applications:

57Multifunction screens

"Personalisation-
Configuration" menu
Once this menu has been selected, you can
gain access to the following functions:


- define the vehicle parameters,

- display configuration,

- choice of language.


Defi ne the vehicle parameters

Once this menu has been selected, you can
activate or deactivate the following equipment:


- wiper linked to reverse gear (refer to the
"Visibility" section),

- guide-me-home lighting and duration (see
"Visibility" section),

- parking sensors (refer to the "Driving"
section). Example: setting of the duration of the guide-
me-home lighting


)
Press the " 
" or " 
" buttons, then the
"OK"
button to select the menu required.

)
Press the " 
" or " 
" buttons, then the
"OK"
button to select the "Guide-me-home
headlamps" line.

)
Press the " 
" or " 
" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
button to confirm.
)
Press the " 
" or " 
" buttons, then the
"OK"
button to select the "OK"
box
and confirm or press the "ESC"
button
to cancel.

Display confi guration

Once this menu has been selected, you can
gain access to the following settings:


- brightness-video setting,

- date and time setting,

- selection of units.
Once the fuel consumption units have
been changed to mpg, the information
in the screen relating to speed and
distance also changes to mph and
miles respectively. For safety reasons, configuration by the
driver of the multifunction screen must
only be done when stationary.



Choice of language

Once this menu has been selected, you can
change the language used by the display
(Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-Brasil,
Türkçe * ).

*
According to country of destination. With Audio system on, once this menu is
selected you can configure your Bluetooth
hands-free system (pairing), view the various
telephone directories (list of calls, ser vices...)
and manage your calls (call, hang up, second
call, secret mode...).
For more information on the "Telephone"
function, refer to the Audio system par t of the
"Audio and telematics" section.


"Telephone" Menu