ECO mode Citroen GRAND C4 PICASSO RHD 2016 2.G Owner's Guide

153
Switching on / Pause
F Turn  thumbwheel   1 to the "LIMIT"  position:  t
he   speed   limiter   mode   is   selected   but   is  
n

ot   switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4,
  if   the   speed   displayed  
i

s   suitable   (by   default,   the   last   speed  
pro

grammed).
F
 
Y
ou   can   temporarily   stop   the   speed   limiter  
b

y   pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You
  do   not   have   to   switch   the   speed   limiter   on  i
n   order   to   set   the   speed.
Once
  the   function   is   selected,   you   can   modify  
t

he   speed   setting   by:
-
 
u
sing   buttons   2   and   3,
  raising   or   lowering  
t

he   speed   displayed   :
F
 
b
y   successive   short   presses,   to   modify  
b

y   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
4
Driving

155
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selection   indication.
8.
 Spe

ed
 s
etting.
Cruise control - "CRUISE"
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance on the part of the driver.
Y ou   are   advised   to   keep   your   feet   near   the   pedals   at   all   times.
Switching on the cruise control requires a
minimum   vehicle   speed   of   25   mph   (40   km/h).
As
  well   as   engagement   of:
-
 
f
ourth   gear   or   higher   on   a   manual   gearbox,
-
 
s
econd   gear   or   higher   in   manual   mode   on  
a

n   automatic   gearbox,
-
 
p
osition   D   on   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
The cruise control is paused
 

by   pressing  
b

utton 4   or   the   brake   pedal   or   on   triggering   of  
t

he   ESC   system   for   safety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the  
p

rogrammed   cruise   speed   is   reached   again.1.
 S

elect   cruise   control   mode.
2.
 S

et   the   current   speed   of   the   vehicle  
a

s   the   programmed   speed   /   Lower   the  
pro

grammed
 s
peed.
3.
 S

et   the   current   speed   of   the   vehicle  
a

s   the   programmed   speed   /   Raise   the  
pro

grammed
 s
peed.
4.
 P

ause   /   resume   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds   or,
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.Displays in the instrument panel
Switching off the ignition cancels any programmed   speed   value. For
  more   information   on   Memorising speeds
,
refer   to   the   corresponding   section.
For   more   information   on   Speed limit
recognition
 
and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
4
Driving

156
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn  thumbwheel   1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears.
Switching on
Once the cruise control is switched on, you can   modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F
 
b
y   successive   short   presses,   to   modify  
t

he   speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F
 
T

urn
 
thumbwheel
 
1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  value   is   then   displayed   in   the   instrument  
pan

el.
For
  more   information   on   Speed limit
recognition
 

and   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Pause
You can pause the cruise control at any time by   pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving

159
The dynamic cruise control is switched on
m anually:   it   requires   that   the   speed   of   the  
v

ehicle   be   between   25   and   90   mph   (40   and  
1

50 km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   or   higher   with   a   manual  
g

earbox,
-
 
s
econd   gear   or   higher   with   an   automatic  
g

earbox   in   manual   mode,
-
 
p
osition   D   with   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
General points
The dynamic cruise control can be paused
m anually o r a utomatically:
-
 
b
y   pressing   button   4,
-
 
b
y   pressing   the   brake   pedal,
-
 
i
n   the   event   of   operation   of   the   ESC,   for  
s

afety reasons,
-
 
i
n   the   event   of   operation   of   the   electric  
p

arking   brake   control   lever,
-
 
w
hen   an   inter-vehicle   time   threshold   is  
r

eached   (calculated   according   to   the  
r

elative   speeds   of   your   vehicle   and   the  
v

ehicle   in   front   and   the   inter-vehicle   time  
se

tting
 c
hosen),
-
 
w
hen   the   distance   between   your   vehicle  
a

nd   the   one   in   front   becomes   too   small,
-
 
w
hen   the   speed   of   the   vehicle   in   front   is   too  
l

ow,
-
 
w
hen   the   speed   of   your   vehicle   becomes  
t

oo   low.
The
 

dynamic
 

cruise
 

control
 

cannot
 

in
 

any
 c

ircumstances
 
replace
 
the
 
observation
 o

f
 sp

eed
 l

imits,
 n

or
 t

he
 n

eed
 fo

r
 v

igilance
 o

n
 
the
 
part
 
of
 
the
 
driver.
It
 
is
 
recommended
 
that
 
you
 
always
 
keep
 y

our
 
feet
 
close
 
to
 
the
 
pedals.
If
 
the
 
speed
 
setting
 
selected
 
is
 
above
 
9

0
 
mph
 
(150
 
km/h),
 
the
 
system
 
switches
 
t

o
 
standard
 
cruise
 
control
 
operation,
 
w

ith
 
no
 
adjustment
 
of
 
the
 
inter-vehicle
 
s

afe
 
distance
 
(a
 
message
 
appears
 
in
 
t

he
 
instrument
 
panel). The
  inter-vehicle   time   setting   is   kept   in  
m

emory   on   switching   off   the   ignition.
The
 
dynamic
 
cruise
 
control
 
operates
 
by
 
d

ay
 
and
 
at
 
night,
 
in
 
fog
 
or
 
in
 
moderate
 
r

ainfall.
The system does not act on the braking s ystem,   but   works   only   with   engine   braking.
The
  regulation   range   is   limited:   there   will
 n

o   longer   be   any   adjustment   of   speed   if   the
 d

ifference   between   the   programmed   speed
 s

etting   and   the   speed   of   the   vehicle   in   front
 b

ecomes   too   high   (18   mph   (30   km/h)).
If the difference between the programmed   speed   setting   and   the  
s

peed   of   the   vehicle   in   front   is   too  
g

reat,   the   speed   cannot   be   adjusted:  
t

he   cruise   control   is   automatically  
d

eactivated.
4
Driving

160
1. Select  cruise   control   mode.
2. U se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Lower   the   speed  
se

tting.
3.
 U

se   the   current   speed   of   the   vehicle   as  
t

he   cruise   speed   setting   /   Raise   the   speed  
se

tting.
4.
 P

ause   /   Resume   the   cruise   control.
5.
 D

isplay   the   list   of   memorised   speeds,   or
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
 S

elect   the   inter-vehicle   distance   ("Close ",
" Normal ", "Distant ")
For
  more   information   on   Memorising speeds,
refer
  to   the   corresponding   section.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Steering mounted controls
Switching on
The active cruise   control   must   be   selected   in  t
he Driving  menu.
F
 
T
urn   the   thumbwheel   1 to the "CRUISE"
position:
  cruise   control   mode   is   selected,  
b

ut   is   paused.
F

P
ress one of the buttons 2 or 3 :
  the   current  
s

peed   of   your   vehicle   becomes   the   cruise  
s

peed   setting.
The
  cruise   control   is   activated   (ON).
By
  default,   the   inter-vehicle   time   is   set   at  
2 s

econds.
Other wise,
  the   last   speed   value   set   will   be   used  
f

or   operation   of   the   system.
Modification of the cruise control
speed
- using  buttons   2   or   3:
F  b y   successive   short   presses,   to   modify  
b

y   steps   of   +   or   -   1   mph   (km/h),
F
 
b
y   a   maintained   press,   to   modify   in   steps  
o

f   +   or   -   5   mph   (km/h).
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speed   settings   are  
d

isplayed   in   the   touch   screen   tablet,
F
 
c
hoose   a   speed   setting:   it   is   displayed   in  
t

he   instrument   panel.
The selection screen closes after a few
moments.
  The   modification   is   then   taken   into  
a

ccount.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F
 
t
he   speed   to   memorise   is   displayed   in  
t

he   instrument   panel,
F
press button 5 again
  to   save   the   speed.
The
  speed   setting   is   then   displayed   in   the  
in

strument
 pan
el.
As
 
a
 
precaution,
 
it
 
is
 
recommended
 
that
 
y

ou
 
select
 
a
 
speed
 
setting
 
close
 
to
 
the
 
c

urrent
 
speed
 
of
 
your
 
vehicle.
Operation
For more information on Speed limit
re cognition  and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Driving

166
Steering mounted controls
1. Select  cruise   control   mode.
2. U se   the   current   speed   as   the   speed  
s

etting /   Lower   the   speed   setting.
3.
 U

se   the   current   speed   as   the   speed  
s

etting /   Raise   the   speed   setting.
4.
 P

ause   /   Resume   cruise   control.
5.
 U

se   the   speed   suggested   by   the   speed  
l

imit   recognition   system.
6.
 D

isplay   and   adjust   the   inter-vehicle  
d

istance
 s
etting.
For
  more   information   on   Speed limit
recognition
 

and   its   memorisation,   refer   to   the  
c

orresponding
 s
ection.
Displays in the instrument panel
7. Indication  of   the   presence   /   absence   of   a  t
arget   vehicle.
8.
 I

ndication   of   cruise   control   activation   /  
d

eactivation.
9.
 Spe

ed
 s
etting.
10.
 I

ndication   that   vehicle   is   held   stationary.
11.
 S

peed   suggested   by   the   speed   limit  
r

ecognition   system.
If
  a   vehicle   is   detected,   the   symbol   7 is   filled  
w

ith   the   colour   associated   with   the   cruise  
c

ontrol   mode.   By   default,   the   symbol   7 is
e m pt y.
In
  cruise   control   activated   mode,   the   symbol 8
appears
  in   green.   By   default,   the   symbol   8
appears
  in   grey. 12 . I
nter-vehicle d istance se tting.
13. P osition   of   the   vehicle   detected   by   the   radar.
This
  information   is   visible   in   the   instrument  
p

anel   in   "Driving"   display   mode.
Driving

170
70
70
Driving situations and associated alerts
To benefit from all of the information available in the instrument panel, you must first select the "DRIVING" display mode.
T he   following   table   describes   the   alerts   and   the   messages   displayed   for   the   different   driving   situations.
The
  display   of   these   alerts   is   not   sequential.
Indicator Display Associated messageComment
according
  to   the   inter-vehicle  
d

istance
 s
elected"Cruise
  control   paused" System   paused.
No
  vehicle   detected.
according
  to   the   inter-vehicle  
d

istance
 s
elected"Cruise
  control   paused" System   paused.
A
  vehicle   has   been   detected.
according
  to   the   inter-vehicle  
d

istance
 s
elected"Cruise control on"
System
 a

ctivated.
No
  vehicle   detected.
according
  to   the   inter-vehicle  
d

istance
 s
elected"Cruise control on"
System
 a

ctivated.
A
  vehicle   has   been   detected.
or "Cruise
  control   suspended"System
 a

ctivated.
The
  driver   has   temporarily   taken   control   of   the   vehicle   by  
a

ccelerating.
Driving

173
Operating fault
As a safety measure, do not use the system if the   brake   lamps   are   faulty.
Do
  not   use   the   system   if   the   front   bumper   is  
d

amaged. In the event of a fault with the cruise
control,
  you   are   alerted   by   the  
i

llumination   of   this   warning   lamp  
a

nd   the   display   of   a   message   in   the  
i

nstrument   panel,   accompanied   by   an  
a

udible
 s
ignal.
The
 
cruise
 
control
 
operates
 
by
 
day
 
and
 
at
 
n

ight,
 
in
 
fog
 
or
 
moderate
 
rainfall.
However,
 
it
 
is
 
strongly
 
recommended
 
that
 
y

ou
 
always
 
keep
 
a
 
safe
 
distance
 
from
 
v

ehicles
 
ahead,
 
according
 
to
 
the
 
driving
 
c

onditions,
 
the
 
weather
 
and
 
the
 
road
 
s

ur face.
Use the cruise control only where the
driving
 
conditions
 
allow
 
running
 
at
 
a
 
c

onstant
 
speed
 
and
 
at
 
an
 
adequate
 
safe
 
di

stance.
Do not use the cruise control in urban
areas,
 
heavy
 
traffic,
 
on
 
winding
 
or
 
steep
 
r

oads
 
or
 
on
 
slippery
 
or
 
flooded
 
sur faces.
In
 
certain
 
circumstances,
 
it
 
may
 
not
 
b

e
 
possible
 
for
 
the
 
speed
 
setting
 
to
 
be
 
m

aintained
 
or
 
even
 
attained:
 
loaded
 
v

ehicle,
 
ascending
 
a
 
steep
 
hill, ... The
 
system
 
is
 
not
 
intended
 
for
 
driving
 
in
 
the
 
fo

llowing
 s

ituations:
-
 
t

he
 
front
 
end
 
of
 
the
 
vehicle
 
has
 
been
 
m

odified
 
(addition
 
of
 
driving
 
lamps),
-
 
d

riving
 
on
 
a
 
racing
 
circuit,
-
 
r

unning
 
on
 
a
 
rolling
 
road,
-
 
u

se
 
of
 
snow
 
chains
 
or
 
non-slip
 
covers.
Have  the   system   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
The
 
operation
 
of
 
the
 
radar,
 
located
 
in
 
t

he
 
front
 
bumper,
 
may
 
be
 
disturbed
 
by
 
a

ccumulations
 
of
 
grime
 
(dust,
 
mud...)
 
or
 
in
 
c

ertain
 
weather
 
conditions
 
(snow,
 
ice...).
The
 
message
 
"SYSTEM
 
INACTIVE:
 
V

isibility
 
reduced"
 
is
 
displayed
 
to
 
signal
 
that
 
t

he
 
system
 
has
 
been
 
put
 
into
 
standby.
Clean
 
the
 
front
 
bumper
 
regularly.
The
 
use
 
of
 
mats
 
not
 
approved
 
by
 
CITROËN
 
m

ay
 
inter fere
 
with
 
the
 
operation
 
of
 
the
 
c

ruise
 
control.
To
 
avoid
 
any
 
risk
 
of
 
jamming
 
the
 
pedals:
-
 
e

nsure
 
that
 
mats
 
are
 
secured
 
correctly,
-
 
n

ever
 
fit
 
one
 
mat
 
on
 
top
 
of
 
another.
4
Driving

178
Driving situations and associated alerts
To benefit from all of the information needed in the instrument panel, you must first select the "Driving" display mode.
T he   table   below   describes   the   alerts   and   messages   displayed   according   to   the   driving   situation.
The
  display   of   these   alerts   is   not   sequential.
State of
the systemWarning
lamp Associated display
and message
Comment
OFF System
 d

eactivated.
ON System
  active,   conditions   not   met:
-
 
s
peed   below   40   mph   (65   km/h),
-
 
n
o   lane   marking   recognised,
-
 
ES
C   deactivated   or   operation   triggered,
-
 
"
sporty"   driving.
ON Automatic
  deactivation   /   standby   of   the   system   (for   example:   detection   of   a   trailer,   use   of   the  
"

space-saver"   spare   wheel   provided   with   the   vehicle).
ON Detection
  of   lane   markings.
Speed
  above   40   mph   (65   km/h).
ON The
  system   corrects   the   trajectory   on   the   side   of   the   lane   marking   detected.
ON "Take
  back   the   wheel".-
 
I
f,   during   correction,   the   system   detects   that   the   driver   has   not   held   the   wheel   for   a   few  
s

econds,   it   interrupts   the   correction   and   returns   control   to   the   driver.
-
 
D
uring   correction   of   the   trajectory,   the   system   determines   that   the   correction   will   not   be  
e

nough   and   a   solid   line   is   crossed:   the   driver   is   warned   that   they   must   complete   the   correction  
o

f   trajectory.
Driving

202
Rear view mirror
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
Manual model
Adjustment
F A djust   the   mirror   so   that   the   glass   is  
d

irected   correctly   in   the   "day"   position.
In
  order   to   ensure   optimum   visibility  
d

uring   your   manoeuvres,   the   mirror  
l

ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Day / night position
F
 
P
ull   the   lever   to   change   to   the   "night"   anti-
dazzle
  position.
F
 
P
ush   the   lever   to   change   to   the   normal  
"

day"   position.
Automatic "electrochrome"
model
This system automatically and progressively changes   between   the   day   and   night   uses   by  
m

eans   of   a   sensor,   which   measures   the   light  
f

rom   the   rear   of   the   vehicle.
Automatic tilting in reverse gear
With the engine running, on engaging reverse gear,   the   mirror   glasses   tilt   downwards.
They
  return   to   their   initial   position:
-
 
a few seconds a fter c oming o ut o f r everse g ear,- once  the   speed   of   the   vehicle   exceeds  6 m
ph   (10   km/h),
-
 
o
n   switching   off   the   engine.
System
  which   provides   a   view   of   the   ground  
d

uring   parking   manoeuvres   in   reverse   gear.
This   function   can   be   deactivated   in   the   Driving
menu.
F

Sel
ect the " Setting" tab then " Comfort"
and
  "Auto mirror dipping in reverse".
Lighting and visibility