sensor DODGE RAM 2001 Service Repair Manual

SEAT TRACK ADJUSTER - REMOVAL....23-143
SEATBELT INDICATOR - DESCRIPTION....8J-27
SEATBELT INDICATOR - OPERATION......8J-27
SEATS - CLEANING, INTAKE/EXHAUST
VALVES ...............9-140,9-198,9-27,9-84
SEATS - DESCRIPTION...............23-131
SEATS - DESCRIPTION, INTAKE/
EXHAUST VALVES . . 9-138,9-195,9-25,9-253,9-81
SEATS - INSPECTION.................30-13
SEATS - INSPECTION, INTAKE/EXHAUST
VALVES ...............9-141,9-198,9-27,9-84
SEATS - INSTALLATION, INTAKE/
EXHAUST VALVES.......9-141,9-260,9-28,9-85
SEATS - OPERATION.................23-131
SEATS - REMOVAL, INTAKE/EXHAUST
VALVES ...............9-140,9-258,9-27,9-84
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES AND SPRINGS,
INTAKE/EXHAUST VALVES..............9-253
SEATS - VALVE SERVICE, INTAKE/
EXHAUST VALVES....................9-195
SECOND WEATHERSTRIP -
INSTALLATION, FRONT DOOR..........23-155
SECOND WEATHERSTRIP - REMOVAL,
FRONT DOOR......................23-154
SECURITY - DESCRIPTION, VEHICLE
THEFT..............................8Q-1
SECURITY - OPERATION, VEHICLE THEFT . . 8Q-2
SECURITY SYSTEM - DIAGNOSIS AND
TESTING, VEHICLE THEFT..............8Q-3
SELECTION-ADDITIVES - STANDARD
PROCEDURE, COOLANT..................7-17
SELECTOR INDICATOR - DESCRIPTION,
GEAR..............................8J-21
SELECTOR INDICATOR - OPERATION,
GEAR..............................8J-21
SENDING UNIT - DIAGNOSIS AND
TESTING, FUEL GAUGE.................14-8
SENDING UNIT / SENSOR -
DESCRIPTION, FUEL LEVEL........14-7,14-73
SENDING UNIT / SENSOR -
INSTALLATION, FUEL LEVEL.............14-9
SENDING UNIT / SENSOR - OPERATION,
FUEL LEVEL.....................14-7,14-73
SENDING UNIT / SENSOR - REMOVAL,
FUEL LEVEL..........................14-8
SENSE - DESCRIPTION, IGNITION
CIRCUIT............................8E-17
SENSE - OPERATION, IGNITION CIRCUIT . . 8E-19
SENSE - PCM INPUT - OPERATION, ASD . . . 8I-3
SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L - OPERATION,
ENGINE COOLANT TEMP................7-48
SENSOR - 3.9L/5.2L/5.9L - REMOVAL,
ENGINE COOLANT TEMP................7-48
SENSOR - DESCRIPTION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - DESCRIPTION, AMBIENT
TEMP.............................8M-11
SENSOR - DESCRIPTION, BATTERY
TEMPERATURE......................8F-29
SENSOR - DESCRIPTION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - DESCRIPTION, FUEL
TEMPERATURE......................14-99
SENSOR - DESCRIPTION, O2...........14-46
SENSOR - DESCRIPTION, SPEED . 21-253,21-424,
21-597,21-770
SENSOR - DESCRIPTION, THROTTLE
POSITION..........................14-51
SENSOR - DESCRIPTION,
TRANSMISSION TEMPERATURE . 21-262,21-433,
21-606,21-779
SENSOR - DESCRIPTION, WATER IN
FUEL
..............................14-85
SENSOR - DIAGNOSIS & TESTING,
AMBIENT TEMPERATURE
..............8M-12
SENSOR - DIAGNOSIS & TESTING,
HEATED SEAT ELEMENT
...............8G-11
SENSOR - INSTALLATION,
ACCELERATOR PEDAL POSITION
........14-93
SENSOR - INSTALLATION, AMBIENT
TEMP
.............................8M-13SENSOR - INSTALLATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - INSTALLATION, FUEL LEVEL
SENDING UNIT.......................14-9
SENSOR - INSTALLATION, MAP........14-104
SENSOR - INSTALLATION, O2...........14-48
SENSOR - OPERATION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - OPERATION, AMBIENT TEMP . . 8M-11
SENSOR - OPERATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - OPERATION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - OPERATION, FUEL
TEMPERATURE.....................14-100
SENSOR - OPERATION, O2.............14-46
SENSOR - OPERATION, SPEED . . 21-253,21-424,
21-597,21-770
SENSOR - OPERATION, THROTTLE
POSITION..........................14-51
SENSOR - OPERATION, TRANSMISSION
TEMPERATURE . . . 21-262,21-433,21-606,21-779
SENSOR - OPERATION, WATER IN FUEL . . 14-85
SENSOR - REMOVAL, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - REMOVAL, AMBIENT TEMP . . . 8M-12
SENSOR - REMOVAL, BATTERY
TEMPERATURE......................8F-29
SENSOR - REMOVAL, FUEL LEVEL
SENDING UNIT.......................14-8
SENSOR - REMOVAL, O2..............14-47
SENSOR - REMOVAL, WATER IN FUEL....14-85
SENSOR RETURN - DESCRIPTION.......8E-17
SENSOR/SWITCH - DESCRIPTION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - INSTALLATION, OIL
PRESSURE.........................9-299
SENSOR/SWITCH - OPERATION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - REMOVAL, OIL
PRESSURE.........................9-298
SEPARATOR - DESCRIPTION, FUEL
FILTER / WATER .....................14-59
SEPARATOR - INSTALLATION, FUEL
FILTER / WATER .....................14-61
SEPARATOR - OPERATION, FUEL FILTER
/ WATER ...........................14-59
SEPARATOR - REMOVAL, FUEL FILTER /
WATER.............................14-60
SERIES - INSTALLATION, REAR PARK
BRAKE CABLES - 1500.................5-39
SERIES - REMOVAL, REAR PARK BRAKE
CABLES - 1500.......................5-37
SERIES WITH DRUM BRAKES -
INSTALLATION, REAR PARK BRAKE
CABLE 2500/3500.....................5-39
SERIES WITH DRUM BRAKES -
REMOVAL, REAR PARK BRAKE
CABLES 2500/3500....................5-38
SERVO - ASSEMBLY, FRONT....21-208,21-379,
21-553,21-723
SERVO - ASSEMBLY, REAR.....21-251,21-422,
21-595,21-768
SERVO - CLEANING, FRONT
....21-207,21-378,
21-552,21-723
SERVO - CLEANING, REAR
.....21-251,21-422,
21-594,21-768
SERVO - DESCRIPTION, FRONT
. . 21-206,21-377,
21-551,21-722
SERVO - DESCRIPTION, REAR
. . . 21-250,21-421,
21-594,21-767
SERVO - DESCRIPTION, SPEED
CONTROL
...........................8P-5
SERVO - DISASSEMBLY, FRONT
. 21-207,21-378,
21-552,21-723
SERVO - DISASSEMBLY, REAR
. . 21-251,21-421,
21-594,21-768
SERVO - INSPECTION, FRONT
. . . 21-207,21-378,
21-553,21-723
SERVO - INSTALLATION, SPEED
CONTROL
..........................8P-10
SERVO - OPERATION, FRONT
. . . 21-207,21-377,
21-552,21-723
SERVO - OPERATION, REAR
....21-250,21-421,
21-594,21-767
SERVO - OPERATION, SPEED CONTROL
. . . 8P-5
SERVO - REMOVAL, SPEED CONTROL
.....8P-6SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT TO
GROUND ON FUSES POWERING......8W-01-7
SHAFT - ASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-412,21-588,
21-760
SHAFT - DESCRIPTION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - DESCRIPTION, PROPELLER.......3-1
SHAFT - DIAGNOSIS AND TESTING,
PROPELLER...........................3-3
SHAFT - DISASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-411,21-586,
21-757
SHAFT - FRONT - INSTALLATION,
PROPELLER...........................3-8
SHAFT - FRONT - REMOVAL,
PROPELLER...........................3-8
SHAFT - INSPECTION, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-411,21-587,
21-760
SHAFT - INSTALLATION, PITMAN........19-23
SHAFT - INSTALLATION, WORM.........19-29
SHAFT - OPERATION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - OPERATION, PROPELLER.........3-1
SHAFT - REAR - INSTALLATION,
PROPELLER...........................3-9
SHAFT - REAR - REMOVAL, PROPELLER....3-9
SHAFT - REMOVAL, PITMAN............19-22
SHAFT - REMOVAL, WORM............19-27
SHAFT - STANDARD PROCEDURES,
PROPELLER...........................3-5
SHAFT FRONT BEARING -
INSTALLATION, OUTPUT . 21-213,21-384,21-560,
21-730
SHAFT FRONT BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-559,21-730
SHAFT REAR BEARING - INSTALLATION,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT REAR BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT SEAL - INSTALLATION, FRONT
OUTPUT...............21-852,21-886,21-922
SHAFT SEAL - INSTALLATION, PITMAN . . . 19-24
SHAFT SEAL - REMOVAL, FRONT
OUTPUT...............21-851,21-886,21-922
SHAFT SEAL - REMOVAL, PITMAN.......19-23
SHAFT SEALS - INSTALLATION, AXLE . 3-29,3-61,
3-94
SHAFT SEALS - REMOVAL, AXLE . 3-29,3-61,3-94
SHAFT, SPECIAL TOOLS - PROPELLER......3-8
SHAFT, SPECIFICATIONS - PROPELLER.....3-8
SHAFTS - INSTALLATION, AXLE....3-125,3-156,
3-185,3-28,3-60,3-93
SHAFTS - INTERMEDIATE -
INSTALLATION, AXLE..................3-28
SHAFTS - INTERMEDIATE - REMOVAL,
AXLE...............................3-28
SHAFTS - REMOVAL, AXLE . . 3-125,3-156,3-185,
3-28,3-60,3-93
SHIELD - INSTALLATION, REAR SPLASH . . 23-96
SHIELD - REMOVAL, REAR SPLASH......23-96
SHIELDS - DESCRIPTION, HEAT.........11-10
SHIELDS - INSTALLATION, FRONT END
SPLASH
............................23-92
SHIELDS - INSTALLATION, HEAT
........11-10
SHIELDS - REMOVAL, FRONT END
SPLASH
............................23-92
SHIELDS - REMOVAL, HEAT
............11-10
SHIFT BOOT - INSTALLATION, 4WD
FLOOR
............................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- INSTALLATION
....................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- REMOVAL
........................23-122
SHIFT BOOT - REMOVAL, 4WD FLOOR
. . . 23-122
SHIFT COVER - INSTALLATION
....21-133,21-90
SHIFT COVER - REMOVAL
.......21-132,21-90
SHIFT INDICATOR (TRANSFER CASE) -
DESCRIPTION
.......................8J-29
SHIFT INDICATOR (TRANSFER CASE) -
OPERATION
.........................8J-29
SHIFT LEVER - ADJUSTMENT
. . . 21-853,21-888,
21-925
BR/BEINDEX 31
Description Group-Page Description Group-Page Description Group-Page

SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................23-61
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................13-9
SPECIFICATIONS, SPECIFICATIONS -
TORQUE............................24-8
SPECIFICATIONS, TORQUE - FUEL
DELIVERY...........................14-4
SPECIFICATIONS, TORQUE - GAS FUEL
INJECTION..........................14-35
SPECIFICATIONS, TORQUE -
GENERATOR/CHARGING SYSTEM........8F-28
SPECIFICATIONS, TORQUE - IGNITION.....8I-2
SPECIFICATIONS, TORQUE - STARTING
SYSTEM............................8F-38
SPEED CONTROL - INSPECTION.........30-17
SPEED CONTROL SERVO - DESCRIPTION . . 8P-5
SPEED CONTROL SERVO -
INSTALLATION.......................8P-10
SPEED CONTROL SERVO - OPERATION....8P-5
SPEED CONTROL SERVO - REMOVAL.....8P-6
SPEED CONTROL SYSTEM -
DESCRIPTION........................8P-1
SPEED CONTROL SYSTEM - OPERATION . . . 8P-2
SPEED CONTROL SYSTEM - TORQUE.....8P-4
SPEED INPUT - DESCRIPTION, VEHICLE . . . 8P-1
SPEED SENSOR - DESCRIPTION . 21-253,21-424,
21-597,21-770
SPEED SENSOR - OPERATION . . . 21-253,21-424,
21-597,21-770
SPEEDOMETER - DESCRIPTION...........8J-30
SPEEDOMETER - OPERATION...........8J-30
SPLASH SHIELD - INSTALLATION, REAR . . 23-96
SPLASH SHIELD - REMOVAL, REAR......23-96
SPLASH SHIELDS - INSTALLATION,
FRONT END.........................23-92
SPLASH SHIELDS - REMOVAL, FRONT
END ...............................23-92
SPLICE LOCATIONS - DESCRIPTION . . . 8W-95-1
SPLICING - STANDARD PROCEDURE,
WIRE...........................8W-01-12
SPLIT BENCH - INSTALLATION, SEAT....23-134
SPLIT BENCH - INSTALLATION, SEAT
BACK.............................23-136
SPLIT BENCH - INSTALLATION, SEAT
BACK COVER.......................23-138
SPLIT BENCH - INSTALLATION, SEAT
CUSHION COVER....................23-140
SPLIT BENCH - INSTALLATION, SEAT
TRACK............................23-142
SPLIT BENCH - REMOVAL, SEAT.......23-134
SPLIT BENCH - REMOVAL, SEAT BACK . . 23-135
SPLIT BENCH - REMOVAL, SEAT BACK
COVER............................23-137
SPLIT BENCH - REMOVAL, SEAT
CUSHION COVER....................23-139
SPLIT BENCH - REMOVAL, SEAT TRACK . 23-142
SPOOL VALVE - INSTALLATION..........19-26
SPOOL VALVE - REMOVAL.............19-24
SPRING - DESCRIPTION........2-11,2-22,2-28
SPRING - INSTALLATION.......2-12,2-22,2-29
SPRING - OPERATION..........2-11,2-22,2-28
SPRING - REMOVAL...........2-11,2-22,2-28
SPRING AND SHOCK - DIAGNOSIS AND
TESTING............................2-26
SPRINGS - INSTALLATION, VALVES AND
VALVE .............................9-199
SPRINGS - REMOVAL, VALVES AND
VALVE .............................9-197
SPRINGS - STANDARD PROCEDURE,
VALVES, GUIDES.............9-138,9-25,9-82
SPRINGS, INTAKE/EXHAUST VALVES &
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES.....................9-253
SPROCKETS - INSTALLATION, TIMING
BELT/CHAIN...........9-115,9-170,9-227,9-58
SPROCKETS - REMOVAL, TIMING
BELT/CHAIN...........9-114,9-170,9-226,9-57
SQUEAKS, RATTLES AND WIND NOISE -
INSPECTION........................30-15
STABILIZER BAR - DESCRIPTION . 2-12,2-22,2-30
STABILIZER BAR - INSTALLATION....2-12,2-23,
2-30
STABILIZER BAR - OPERATION
. . 2-12,2-22,2-30
STABILIZER BAR - REMOVAL
....2-12,2-22,2-30
STANCHION COVER - INSTALLATION
....23-143
STANCHION COVER - REMOVAL
........23-143
STANDARD CAB - INSTALLATION
........8O-19STANDARD CAB - REMOVAL...........8O-18
STARTER MOTOR - DESCRIPTION,
ENGINE............................8F-39
STARTER MOTOR - DIAGNOSIS AND
TESTING...........................8F-39
STARTER MOTOR - INSTALLATION,
ENGINE............................8F-41
STARTER MOTOR - OPERATION, ENGINE . . 8F-39
STARTER MOTOR - REMOVAL, ENGINE . . . 8F-40
STARTER MOTOR RELAY -
DESCRIPTION, ENGINE................8F-42
STARTER MOTOR RELAY -
INSTALLATION, ENGINE................8F-43
STARTER MOTOR RELAY - OPERATION,
ENGINE............................8F-42
STARTER MOTOR RELAY - REMOVAL,
ENGINE............................8F-43
STARTER RELAY - DIAGNOSIS AND
TESTING...........................8F-42
STARTING - DESCRIPTION.............8F-32
STARTING - OPERATION...............8F-32
STARTING - STANDARD PROCEDURE,
JUMP...............................0-27
STARTING SYSTEM - DIAGNOSIS AND
TESTING...........................8F-33
STARTING SYSTEM - SPECIFICATIONS,
TORQUE............................8F-38
STARTING SYSTEM, SPECIFICATIONS.....8F-38
STATE DISPLAY TEST MODE -
DESCRIPTION........................25-1
STATIONARY GLASS - DESCRIPTION....23-145
STATIONARY GLASS - OPERATION......23-145
STEERING - DESCRIPTION..............19-1
STEERING - OPERATION................19-1
STEERING AND HANDLING -
INSPECTION........................30-15
STEERING COLUMN OPENING COVER -
INSTALLATION......................23-116
STEERING COLUMN OPENING COVER -
REMOVAL.........................23-115
STEERING FLOW AND PRESSURE -
DIAGNOSIS AND TESTING, POWER.......19-4
STEERING GEAR HOUSING PLUG -
INSTALLATION.......................19-27
STEERING GEAR HOUSING PLUG -
REMOVAL..........................19-27
STEERING GEAR LEAKAGE - DIAGNOSIS
AND TESTING, POWER................19-14
STEERING GEAR, SPECIAL TOOLS -
POWER............................19-20
STEERING GEAR, SPECIFICATIONS -
POWER............................19-19
STEERING LINKAGE, SPECIAL TOOLS....19-39,
19-42
STEERING PUMP - INITIAL OPERATION -
STANDARD PROCEDURE, POWER.......19-31
STEERING PUMP, SPECIAL TOOLS -
POWER............................19-36
STEERING SYSTEM - DIAGNOSIS AND
TESTING, POWER.....................19-2
STEERING SYSTEM - STANDARD
PROCEDURE, FLUSHING POWER........19-32
STEERING WHEEL - INSTALLATION......19-13
STEERING WHEEL - REMOVAL..........19-13
STEM SEAL - INSTALLATION, VALVE.....9-198
STEM SEALS - REMOVAL, VALVE........9-197
STEPS - NEW VEHICLE PREPARATION
FORM, FINAL........................30-22
STOP LAMP - INSTALLATION, CENTER
HIGH MOUNTED......................8L-6
STOP LAMP - REMOVAL, CENTER HIGH
MOUNTED...........................8L-6
STOP LAMP UNIT - INSTALLATION,
CENTER HIGH MOUNTED...............8L-6
STOP LAMP UNIT - REMOVAL, CENTER
HIGH MOUNTED......................8L-6
STORAGE - DESCRIPTION, PRE
DELIVERY..........................30-19
STORAGE - STANDARD PROCEDURE,
PRE DELIVERY......................30-20
STORAGE BIN - INSTALLATION
.........23-116
STORAGE BIN - REMOVAL
............23-116
STOWAGE TRAY - INSTALLATION, REAR
FLOOR
............................23-121
STOWAGE TRAY - REMOVAL, REAR
FLOOR
............................23-121
STRAP - INSTALLATION, CAB-TO- BED
GROUND
...........................8A-14STRAP - INSTALLATION, ENGINE-TO-
BODY GROUND......................8A-13
STRAP - INSTALLATION, HEATER CORE
GROUND...........................8A-15
STRAP - REMOVAL, CAB-TO- BED
GROUND...........................8A-14
STRAP - REMOVAL, ENGINE-TO-BODY
GROUND...........................8A-13
STRAP - REMOVAL, HEATER CORE
GROUND...........................8A-14
STRETCH - INSPECTION, MEASURING
TIMING CHAIN........9-114,9-170,9-227,9-58
STRIKER - ADJUSTMENT, LATCH.......23-102
STRIKER - INSTALLATION, GLOVE BOX
LATCH ............................23-113
STRIKER - INSTALLATION, LATCH . 23-102,23-65,
23-73
STRIKER - LOWER - INSTALLATION,
LATCH .............................23-82
STRIKER - LOWER - REMOVAL, LATCH . . . 23-82
STRIKER - REMOVAL, GLOVE BOX
LATCH ............................23-113
STRIKER - REMOVAL, LATCH....23-102,23-65,
23-73
STRIKER - UPPER - INSTALLATION,
LATCH .............................23-82
STRIKER - UPPER - REMOVAL, LATCH . . . 23-82
STRIPE - INSTALLATION, TAPE..........23-88
STRIPE - REMOVAL, TAPE.............23-88
STRIPES AND DECALS - INSTALLATION,
BODY..............................23-87
STRIPES AND DECALS - REMOVAL,
BODY..............................23-87
STRUCTURAL ADHESIVE LOCATIONS,
SPECIFICATIONS.....................23-44
STUDS - INSTALLATION...............22-12
STUDS - REMOVAL...................22-12
SUCTION AND DISCHARGE LINE -
INSTALLATION.......................24-51
SUCTION AND DISCHARGE LINE -
REMOVAL..........................24-50
SUN VISOR - INSTALLATION..........23-127
SUN VISOR - REMOVAL..............23-127
SUPPLIES - DESCRIPTION, 5 VOLT......8E-17
SUPPLIES - OPERATION, 5 VOLT........8E-19
SUPPLY - DIAGNOSIS AND TESTING,
VACUUM............................8P-2
SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL..................14-56
SUPPORT - INSTALLATION, LUMBAR....23-133
SUPPORT - REMOVAL, LUMBAR.......23-133
SUPPORT BRACKET - INSTALLATION,
REARVIEW MIRROR.................23-126
SUPPORT PLATE - INSTALLATION........5-32
SUPPORT PLATE - REMOVAL............5-32
SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO NOISE...........8A-12
SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO
NOISE.............................8A-12
SUSPENSION - STANDARD
PROCEDURES, ALIGNMENT LINK/COIL.....2-5
SUSPENSION, SPECIAL TOOLS -
INDEPENDENT FRONT...................2-9
SUSPENSION, SPECIAL TOOLS -
LINK/COIL...........................2-16
SUSPENSION-REAR, SPECIAL TOOLS.....2-28
SWITCH - DESCRIPTION
...............8P-12
SWITCH - DESCRIPTION, A/C HIGH
PRESSURE
.........................24-20
SWITCH - DESCRIPTION, A/C LOW
PRESSURE
.........................24-21
SWITCH - DESCRIPTION, BLOWER
MOTOR
............................24-24
SWITCH - DESCRIPTION, BRAKE LAMP
....8L-4
SWITCH - DESCRIPTION, CLUTCH
PEDAL POSITION
.....................6-22
SWITCH - DESCRIPTION, DOOR AJAR
....8L-34
SWITCH - DESCRIPTION, DOOR
CYLINDER LOCK
......................8N-5
SWITCH - DESCRIPTION, DRIVER
POWER SEAT
.......................8N-16
SWITCH - DESCRIPTION, DRIVER SEAT
HEATER
.............................8G-7
SWITCH - DESCRIPTION, HEADLAMP
....8L-18
SWITCH - DESCRIPTION, HORN
..........8H-4
SWITCH - DESCRIPTION, IGNITION
......19-11
BR/BEINDEX 33
Description Group-Page Description Group-Page Description Group-Page

TANK MODULE - DESCRIPTION, FUEL....14-78
TANK MODULE - INSTALLATION, FUEL....14-79
TANK MODULE - OPERATION, FUEL......14-78
TANK MODULE - REMOVAL, FUEL.......14-78
TAPE STRIPE - INSTALLATION..........23-88
TAPE STRIPE - REMOVAL..............23-88
TAPPETS - DIAGNOSIS AND TESTING,
HYDRAULIC............9-151,9-206,9-38,9-95
TASK MANAGER - DESCRIPTION........25-15
TASK MANAGER - OPERATION..........25-19
TEMP SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-48
TEMP SENSOR - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-48
TEMP SENSOR - DESCRIPTION,
AMBIENT..........................8M-11
TEMP SENSOR - INSTALLATION,
AMBIENT..........................8M-13
TEMP SENSOR - OPERATION, AMBIENT . . 8M-11
TEMP SENSOR - REMOVAL, AMBIENT . . . 8M-12
TEMPERATURE GAUGE - DESCRIPTION,
ENGINE............................8J-19
TEMPERATURE GAUGE - OPERATION,
ENGINE............................8J-19
TEMPERATURE SENSOR - DESCRIPTION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - DESCRIPTION,
FUEL..............................14-99
TEMPERATURE SENSOR - DESCRIPTION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - DIAGNOSIS &
TESTING, AMBIENT..................8M-12
TEMPERATURE SENSOR -
INSTALLATION, BATTERY..............8F-29
TEMPERATURE SENSOR - OPERATION,
BATTERY...........................8F-29
TEMPERATURE SENSOR - OPERATION,
FUEL.............................14-100
TEMPERATURE SENSOR - OPERATION,
TRANSMISSION . . . 21-262,21-433,21-606,21-779
TEMPERATURE SENSOR - REMOVAL,
BATTERY...........................8F-29
TENSIONER - ADJUSTMENT, CABLE.......5-40
TENSIONER - DESCRIPTION, TIMING
BELT/CHAIN..........................9-57
TENSIONER - OPERATION, TIMING
BELT/CHAIN..........................9-57
TENSIONERS - 3.9L/5.2L/5.9L -
DESCRIPTION, BELT...................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
INSTALLATION, BELT...................7-20
TENSIONERS - 3.9L/5.2L/5.9L -
OPERATION, BELT.....................7-19
TENSIONERS - 3.9L/5.2L/5.9L -
REMOVAL, BELT......................7-20
TENSIONERS - 5.9L DIESEL -
DESCRIPTION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
INSTALLATION, BELT...................7-23
TENSIONERS - 5.9L DIESEL -
OPERATION, BELT.....................7-23
TENSIONERS - 5.9L DIESEL - REMOVAL,
BELT ...............................7-23
TENSIONERS - 8.0L - DESCRIPTION,
BELT ...............................7-20
TENSIONERS - 8.0L - INSTALLATION,
BELT ...............................7-22
TENSIONERS - 8.0L - OPERATION, BELT . . . 7-20
TENSIONERS - 8.0L - REMOVAL, BELT.....7-21
TERMINAL - INSTALLATION.........8W-01-11
TERMINAL - REMOVAL.............8W-01-11
TEST - DIAGNOSIS AND TESTING, FUEL
INJECTOR.....................14-53,14-95
TEST - DIAGNOSIS AND TESTING, FUEL
PRESSURE LEAK DOWN
................14-2
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP AMPERAGE
....................14-10
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP CAPACITY
......................14-9
TEST - DIAGNOSIS AND TESTING, FUEL
PUMP PRESSURE
....................14-10
TEST - DIAGNOSIS AND TESTING,
HYDRAULIC PRESSURE
. . 21-144,21-315,21-487,
21-658TEST - DIAGNOSIS AND TESTING,
POWR-LOKY........................3-161
TEST - DIAGNOSIS AND TESTING, ROAD . . . 8P-3
TEST - INSPECTION WINDSHIELD
WIPERS/WASHERS, ROAD.............30-18
TEST - STANDARD PROCEDURE,
BUILT-IN INDICATOR..................8F-11
TEST - STANDARD PROCEDURE,
HYDROMETER.......................8F-12
TEST - STANDARD PROCEDURE,
IGNITION-OFF DRAW..................8F-15
TEST - STANDARD PROCEDURE, LOAD . . . 8F-14
TEST - STANDARD PROCEDURE,
OPEN-CIRCUIT VOLTAGE...............8F-13
TEST - STANDARD PROCEDURE,
VERIFICATION........................8O-5
TEST INSPECTION - DESCRIPTION,
ROAD..............................30-15
TEST MODE - DESCRIPTION, CIRCUIT
ACTUATION..........................25-1
TEST MODE - DESCRIPTION, STATE
DISPLAY............................25-1
TETHER - INSTALLATION, CHILD.........8O-9
TETHER - REMOVAL, CHILD.............8O-9
THEFT SECURITY - DESCRIPTION,
VEHICLE............................8Q-1
THEFT SECURITY - OPERATION, VEHICLE . . 8Q-2
THEFT SECURITY SYSTEM - DIAGNOSIS
AND TESTING, VEHICLE................8Q-3
THERMOSTAT - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT.........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT........7-50
THERMOSTAT - 3.9L/5.2L/5.9L -
OPERATION, ENGINE COOLANT..........7-49
THERMOSTAT - 3.9L/5.2L/5.9L -
REMOVAL, ENGINE COOLANT............7-49
THERMOSTAT - 5.9L DIESEL -
DESCRIPTION, ENGINE COOLANT.........7-54
THERMOSTAT - 5.9L DIESEL -
INSTALLATION, ENGINE COOLANT........7-55
THERMOSTAT - 5.9L DIESEL -
OPERATION, ENGINE COOLANT..........7-54
THERMOSTAT - 5.9L DIESEL -
REMOVAL, ENGINE COOLANT............7-55
THERMOSTAT - 8.0L - DESCRIPTION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - INSTALLATION,
ENGINE COOLANT.....................7-53
THERMOSTAT - 8.0L - OPERATION,
ENGINE COOLANT.....................7-52
THERMOSTAT - 8.0L - REMOVAL,
ENGINE COOLANT.....................7-52
THERMOSTAT - DIAGNOSIS AND
TESTING....................7-49,7-52,7-54
THOMAS AND BETTS - INSTALLATION,
CONNECTOR.....................8W-01-10
THOMAS AND BETTS - REMOVAL,
CONNECTOR......................8W-01-9
THREAD REPAIR - STANDARD
PROCEDURE, ALUMINUM......21-159,21-330,
21-502,21-673
THREADED HOLE REPAIR -
DESCRIPTION......................Intro.-6
THREADS - STANDARD PROCEDURE,
REPAIR DAMAGED OR WORN . 9-11,9-125,9-181,
9-238,9-68
THROTTLE BODY - DESCRIPTION........14-48
THROTTLE BODY - OPERATION.........14-48
THROTTLE CONTROL CABLE -
INSTALLATION.................14-105,14-50
THROTTLE CONTROL CABLE -
REMOVAL....................14-104,14-50
THROTTLE POSITION SENSOR -
DESCRIPTION.......................14-51
THROTTLE POSITION SENSOR -
OPERATION.........................14-51
THROTTLE VALVE CABLE -
ADJUSTMENTS, TRANSMISSION
. 21-254,21-425,
21-598,21-771
THROTTLE VALVE CABLE -
DESCRIPTION
....21-253,21-424,21-597,21-770
TIMER MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL
...................8E-1
TIMER MODULE - DIAGNOSIS AND
TESTING, CENTRAL
....................8E-4
TIMER MODULE - INSTALLATION, BODY
CONTROL/CENTRAL
...................8E-6TIMER MODULE - OPERATION, BODY
CONTROL/CENTRAL...................8E-3
TIMER MODULE - REMOVAL, BODY
CONTROL/CENTRAL...................8E-5
TIMING - DIAGNOSIS AND TESTING,
FUEL INJECTION PUMP...............14-66
TIMING BELT / CHAIN COVER(S) -
INSTALLATION........9-113,9-169,9-226,9-56
TIMING BELT / CHAIN COVER(S) -
REMOVAL............9-113,9-169,9-225,9-56
TIMING BELT/CHAIN AND SPROCKETS -
INSTALLATION........9-115,9-170,9-227,9-58
TIMING BELT/CHAIN AND SPROCKETS -
REMOVAL............9-114,9-170,9-226,9-57
TIMING BELT/CHAIN TENSIONER -
DESCRIPTION........................9-57
TIMING BELT/CHAIN TENSIONER -
OPERATION..........................9-57
TIMING CHAIN STRETCH - INSPECTION,
MEASURING..........9-114,9-170,9-227,9-58
TIMING, SPECIFICATIONS - IGNITION......8I-3
TIPS - CLEANING, APPEARANCE........30-21
TIRE - DESCRIPTION, SPARE............22-9
TIRE AND WHEEL BALANCE -
STANDARD PROCEDURES...............22-4
TIRE AND WHEEL RUNOUT - DIAGNOSIS
AND TESTING........................22-1
TIRE NOISE OR VIBRATION - DIAGNOSIS
AND TESTING........................22-8
TIRE PRESSURES - INSPECTION.........30-8
TIRE REVOLUTIONS PER MILE,
SPECIFICATIONS......................22-9
TIRE ROTATION - STANDARD
PROCEDURES........................22-2
TIRE WEAR PATTERNS - DIAGNOSIS
AND TESTING........................22-7
TIRE WINCH - INSTALLATION, SPARE....13-10
TIRE WINCH - REMOVAL, SPARE........13-10
TIRES - DESCRIPTION.............22-5,22-6
TO GROUND - STANDARD PROCEDURE,
TESTING FOR A SHORT.............8W-01-6
TO GROUND ON FUSES POWERING
SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT....8W-01-7
TO OIL COOLER - INSTALLATION, AIR.....7-88
TO OIL COOLER - REMOVAL, AIR.........7-87
TO OIL COOLER - REMOVAL, WATER......7-87
TO USE WIRING DIAGRAMS -
DESCRIPTION, HOW................8W-01-1
TOOLS - 5.2L ENGINE, SPECIAL..........9-77
TOOLS - 5.9L DIESEL ENGINE, SPECIAL . . 9-244
TOOLS - 5.9L ENGINE, SPECIAL.........9-134
TOOLS - 8.0L ENGINE, SPECIAL.........9-188
TOOLS - AUDIO SYSTEMS, SPECIAL......8A-4
TOOLS - BASE BRAKES, SPECIAL.........5-4
TOOLS - COOLING, SPECIAL.............7-18
TOOLS - DIESEL FUEL SYSTEM,
SPECIAL...........................14-59
TOOLS - FRONT AXLE, SPECIAL..........3-58
TOOLS - FRONT AXLES, SPECIAL.........3-25
TOOLS - FUEL SYSTEM, SPECIAL . . . 14-36,14-4
TOOLS - HEADLAMP ALIGNMENT,
SPECIAL............................8L-4
TOOLS - INDEPENDENT FRONT
SUSPENSION, SPECIAL..................2-9
TOOLS - LINK/COIL SUSPENSION,
SPECIAL
............................2-16
TOOLS - NV5600 MANUAL
TRANSMISSION, SPECIAL
.............21-127
TOOLS - OVERHEAD CONSOLE
SYSTEMS, SPECIAL
...................8M-8
TOOLS - POWER DISTRIBUTION
SYSTEMS, SPECIAL
................8W-97-2
TOOLS - POWER STEERING GEAR,
SPECIAL
...........................19-20
TOOLS - POWER STEERING PUMP,
SPECIAL
...........................19-36
TOOLS - PROPELLER SHAFT, SPECIAL
......3-8
TOOLS - RE TRANSMISSION, SPECIAL
. . 21-534,
21-704
TOOLS - RE TRANSMISSIONS, SPECIAL
. 21-188,
21-359
TOOLS - STEERING LINKAGE, SPECIAL
. . . 19-39,
19-42
TOOLS - SUSPENSION-REAR, SPECIAL
....2-28
TOOLS, AIRBAG SYSTEM - SPECIAL
......8O-6
TOOLS, WIRING/TERMINAL - SPECIAL
. 8W-01-8
BR/BEINDEX 35
Description Group-Page Description Group-Page Description Group-Page

TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLER AND TUBES - WITHOUT
RADIATOR IN-TANK...........7-80,7-83,7-86
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLERS AND TUBES - WITH
RADIATOR IN-TANK...........7-79,7-83,7-85
TRANSMISSION OVERTEMP INDICATOR
- DESCRIPTION......................8J-31
TRANSMISSION OVERTEMP INDICATOR
- OPERATION........................8J-31
TRANSMISSION, SPECIAL TOOLS -
NV5600 MANUAL...................21-127
TRANSMISSION, SPECIAL TOOLS - RE . . 21-534,
21-704
TRANSMISSION, SPECIFICATIONS......21-186,
21-532,21-702
TRANSMISSION TEMPERATURE SENSOR
- DESCRIPTION . . . 21-262,21-433,21-606,21-779
TRANSMISSION TEMPERATURE SENSOR
- OPERATION.....21-262,21-433,21-606,21-779
TRANSMISSION THROTTLE VALVE
CABLE - ADJUSTMENTS . 21-254,21-425,21-598,
21-771
TRANSMISSIONS, SPECIAL TOOLS - RE . 21-188,
21-359
TRANSMISSION/TRANSFER CASE -
INSPECTION........................30-15
TRANSMITTER - DESCRIPTION, REMOTE
KEYLESS ENTRY......................8N-7
TRANSMITTER - DIAGNOSIS AND
TESTING, REMOTE KEYLESS ENTRY......8N-7
TRANSMITTER - OPERATION, REMOTE
KEYLESS ENTRY......................8N-7
TRANSMITTER BATTERIES - STANDARD
PROCEDURE, RKE.....................8N-8
TRANSMITTER PROGRAMMING -
STANDARD PROCEDURE, RKE...........8N-8
TRAY - DESCRIPTION, BATTERY.........8F-24
TRAY - INSTALLATION, BATTERY........8F-25
TRAY - INSTALLATION, REAR FLOOR
STOWAGE.........................23-121
TRAY - OPERATION, BATTERY..........8F-25
TRAY - REMOVAL, BATTERY............8F-25
TRAY - REMOVAL, REAR FLOOR
STOWAGE.........................23-121
TREAD WEAR INDICATORS - DIAGNOSIS
AND TESTING........................22-7
TRIM - INSTALLATION, A-PILLAR.......23-119
TRIM - INSTALLATION, B-PILLAR.......23-120
TRIM - INSTALLATION, C-PILLAR.......23-128
TRIM - INSTALLATION, DOOR SILL.....23-121
TRIM - INSTALLATION, GLOVE BOX
OPENING UPPER....................23-114
TRIM - INSTALLATION, REAR CLOSURE
PANEL............................23-121
TRIM - REMOVAL, A-PILLAR..........23-119
TRIM - REMOVAL, B-PILLAR..........23-120
TRIM - REMOVAL, C-PILLAR..........23-128
TRIM - REMOVAL, DOOR SILL.........23-121
TRIM - REMOVAL, GLOVE BOX OPENING
UPPER............................23-114
TRIM - REMOVAL, REAR CLOSURE
PANEL............................23-120
TRIM COVER - INSTALLATION, COWL . . . 23-120
TRIM COVER - REMOVAL, COWL.......23-119
TRIM PANEL - INSTALLATION......23-74,23-84
TRIM PANEL - INSTALLATION, QUARTER . 23-128
TRIM PANEL - REMOVAL.........23-74,23-84
TRIM PANEL - REMOVAL, QUARTER....23-127
TRIP COMPUTER/MAINTENANCE
REMINDER - INSPECTION..............30-17
TRIP DEFINITION - DESCRIPTION........25-18
TROUBLE CODES - DESCRIPTION,
DIAGNOSTIC.........................25-2
TRUCK MAINTENANCE SCHEDULE (8.0L
2500 & 3500 MODELS - CALIFORNIA
ONLY) - DESCRIPTION, MEDIUM DUTY....0-13
TUBE - DESCRIPTION, A/C ORIFICE
......24-53
TUBE - DIAGNOSIS AND TESTING, FIXED
ORIFICE
............................24-54
TUBE - OPERATION, A/C ORIFICE
........24-53
TUBE - REMOVAL, A/C ORIFICE
.........24-54
TUBES - WITH RADIATOR IN-TANK
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLERS
...................7-79,7-83,7-85TUBES - WITHOUT RADIATOR IN-TANK
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLER....................7-80,7-83,7-86
TURBO DIESEL - DESCRIPTION,
MAINTENANCE SCHEDULES -
24-VALVE CUMMINS...................0-22
TURBOCHARGER - CLEANING..........11-16
TURBOCHARGER - DESCRIPTION........11-13
TURBOCHARGER - INSPECTION.........11-16
TURBOCHARGER - INSTALLATION.......11-16
TURBOCHARGER - OPERATION.........11-13
TURBOCHARGER - REMOVAL...........11-15
TURN AND EMERGENCY SIGNALS -
INSPECTION........................30-19
TURN SIGNAL & HAZARD WARNING
SYSTEM - DESCRIPTION...............8L-2
TURN SIGNAL & HAZARD WARNING
SYSTEM - DIAGNOSIS AND TESTING......8L-3
TURN SIGNAL & HAZARD WARNING
SYSTEM - OPERATION.................8L-2
TURN SIGNAL CANCEL CAM -
DESCRIPTION.......................8L-30
TURN SIGNAL CANCEL CAM -
OPERATION.........................8L-31
TURN SIGNAL INDICATORS -
DESCRIPTION.......................8J-32
TURN SIGNAL INDICATORS - DIAGNOSIS
AND TESTING.......................8J-32
TURN SIGNAL INDICATORS -
OPERATION.........................8J-32
TURNING LOOP ADJUSTER -
INSTALLATION, SEAT BELT..............8O-29
TURNING LOOP ADJUSTER - REMOVAL,
SEAT BELT .........................8O-29
TURNING LOOP HEIGHT ADJUSTER
KNOB - INSTALLATION................8O-30
TURNING LOOP HEIGHT ADJUSTER
KNOB - REMOVAL....................8O-30
TWEETER SPEAKER - INSTALLATION,
A-PILLAR...........................8A-19
TWEETER SPEAKER - REMOVAL,
A-PILLAR...........................8A-19
UNDERHOOD LAMP - INSTALLATION.....8L-32
UNDERHOOD LAMP - REMOVAL.........8L-31
UNDERHOOD LAMP UNIT -
INSTALLATION.......................8L-32
UNDERHOOD LAMP UNIT - REMOVAL....8L-32
UNIT - ADJUSTMENTS, FOG LAMP.......8L-12
UNIT - ADJUSTMENTS, HEADLAMP......8L-21
UNIT - ASSEMBLY, OVERDRIVE . . 21-225,21-395,
21-569,21-742
UNIT - CLEANING, OVERDRIVE . . 21-224,21-394,
21-568,21-741
UNIT - DIAGNOSIS AND TESTING, FUEL
GAUGE SENDING......................14-8
UNIT - DISASSEMBLY, OVERDRIVE.....21-217,
21-387,21-562,21-734
UNIT - INSPECTION, OVERDRIVE......21-224,
21-394,21-569,21-741
UNIT - INSTALLATION, CENTER HIGH
MOUNTED STOP LAMP.................8L-6
UNIT - INSTALLATION, FOG LAMP.......8L-12
UNIT - INSTALLATION, HEADLAMP.......8L-20
UNIT - INSTALLATION, LICENSE PLATE
LAMP..............................8L-22
UNIT - INSTALLATION, OVERDRIVE.....21-234,
21-404,21-577,21-750
UNIT - INSTALLATION, PARK/TURN
SIGNAL LAMP.......................8L-29
UNIT - INSTALLATION, TAIL LAMP.......8L-30
UNIT - INSTALLATION, UNDERHOOD
LAMP..............................8L-32
UNIT - REMOVAL, CENTER HIGH
MOUNTED STOP LAMP.................8L-6
UNIT - REMOVAL, FOG LAMP...........8L-11
UNIT - REMOVAL, HEADLAMP..........8L-20
UNIT - REMOVAL, LICENSE PLATE LAMP . . 8L-22
UNIT - REMOVAL, OVERDRIVE . . 21-216,21-387,
21-560,21-733
UNIT - REMOVAL, PARK/TURN SIGNAL
LAMP
..............................8L-29
UNIT - REMOVAL, TAIL LAMP
...........8L-30
UNIT - REMOVAL, UNDERHOOD LAMP
. . . 8L-32
UNIT / SENSOR - DESCRIPTION, FUEL
LEVEL SENDING
.................14-7,14-73
UNIT / SENSOR - INSTALLATION, FUEL
LEVEL SENDING
......................14-9UNIT / SENSOR - OPERATION, FUEL
LEVEL SENDING.................14-7,14-73
UNIT / SENSOR - REMOVAL, FUEL
LEVEL SENDING......................14-8
UNIVERSAL JOINTS - DISASSEMBLY,
SINGLE CARDAN......................3-11
UNIVERSAL JOINTS - INSTALLATION,
SINGLE CARDAN..................3-34,3-66
UNIVERSAL JOINTS - REMOVAL, SINGLE
CARDAN........................3-33,3-65
UP/DOWN - ADJUSTMENT, FRONT DOOR . 23-69
UPPER - INSTALLATION, LATCH.........23-81
UPPER - INSTALLATION, LATCH
STRIKER...........................23-82
UPPER - REMOVAL, LATCH............23-81
UPPER - REMOVAL, LATCH STRIKER.....23-82
UPPER BALL JOINT - DIAGNOSIS AND
TESTING............................2-12
UPPER BALL JOINT - INSTALLATION......2-25
UPPER CONTROL ARM - INSTALLATION . . . 2-13,
2-24
UPPER CONTROL ARM - REMOVAL . . . 2-13,2-23
UPPER CORNER SEAL - INSTALLATION,
FRONT DOOR......................23-154
UPPER CORNER SEAL - REMOVAL,
FRONT DOOR......................23-154
UPPER TRIM - INSTALLATION, GLOVE
BOX OPENING......................23-114
UPPER TRIM - REMOVAL, GLOVE BOX
OPENING..........................23-114
UPSHIFT INDICATOR - DESCRIPTION.....8J-33
UPSHIFT INDICATOR - OPERATION.......8J-33
USAGE - DESCRIPTION, FASTENER.....Intro.-6
USE WIRING DIAGRAMS -
DESCRIPTION, HOW TO.............8W-01-1
V-10 - DESCRIPTION, 8.0L..............8I-1
V-10 - OPERATION, 8.0L................8I-1
V-10 ENGINE - IGNITION COIL
RESISTANCE, 8.0L.....................8I-3
V-10 ENGINE - SPARK PLUG CABLE
ORDER, 8.0L.........................8I-2
V-6 ENGINE - ENGINE FIRING ORDER,
3.9L................................8I-2
V-6/V-8 - DESCRIPTION.................8I-1
V-6/V-8 - OPERATION..................8I-1
V-6/V-8 ENGINES - DESCRIPTION........25-35
V-6/V-8 ENGINES - DIAGNOSIS AND
TESTING, PCV VALVE.................25-36
V-6/V-8 ENGINES - OPERATION.........25-35
V-8 ENGINES - ENGINE FIRING ORDER,
5.2L/5.9L............................8I-2
VACUUM CHECK VALVE - DESCRIPTION . . 24-28
VACUUM CHECK VALVE - INSTALLATION . . 24-29
VACUUM CHECK VALVE - OPERATION....24-28
VACUUM CHECK VALVE - REMOVAL......24-29
VACUUM MOTOR - ASSEMBLY, AXLE . . 3-33,3-65
VACUUM MOTOR - DESCRIPTION, AXLE . . . 3-29,
3-62
VACUUM MOTOR - DIAGNOSIS AND
TESTING........................3-31,3-63
VACUUM MOTOR - DISASSEMBLY, AXLE . . 3-33,
3-65
VACUUM MOTOR - INSTALLATION, AXLE . . 3-33,
3-65
VACUUM MOTOR - OPERATION, AXLE . 3-30,3-62
VACUUM MOTOR - REMOVAL, AXLE . . 3-33,3-65
VACUUM PUMP - 5.9L DIESEL -
DESCRIPTION........................7-34
VACUUM PUMP - 5.9L DIESEL -
INSTALLATION
........................7-37
VACUUM PUMP - 5.9L DIESEL -
OPERATION
..........................7-35
VACUUM PUMP - 5.9L DIESEL -
REMOVAL
...........................7-35
VACUUM PUMP OUTPUT - DIAGNOSIS
AND TESTING
........................7-35
VACUUM RESERVOIR - DESCRIPTION
....24-29
VACUUM RESERVOIR - DESCRIPTION
....8P-13
VACUUM RESERVOIR - INSTALLATION
....24-30
VACUUM RESERVOIR - INSTALLATION
. . . 8P-14
VACUUM RESERVOIR - OPERATION
......24-29
VACUUM RESERVOIR - REMOVAL
.......24-30
VACUUM RESERVOIR - REMOVAL
.......8P-13
VACUUM SCHEMATICS - DIAGNOSIS
AND TESTING
.......................25-37
VACUUM SUPPLY - DIAGNOSIS AND
TESTING
............................8P-2
BR/BEINDEX 37
Description Group-Page Description Group-Page Description Group-Page

VACUUM SYSTEM - DIAGNOSIS AND
TESTING...........................24-10
VALVE - CLEANING, OIL PRESSURE
RELIEF.............................9-297
VALVE - DESCRIPTION, COMBINATION......5-9
VALVE - DESCRIPTION, HIGH PRESSURE
RELIEF.............................24-46
VALVE - DESCRIPTION, ONE WAY CHECK . 25-30
VALVE - DESCRIPTION, OVERFLOW......14-83
VALVE - DESCRIPTION, ROLLOVER......14-25
VALVE - DESCRIPTION, TORQUE
CONVERTER
DRAINBACK......21-262,21-432,21-605,21-778
VALVE - DESCRIPTION, VACUUM CHECK . . 24-28
VALVE - DIAGNOSIS AND TESTING,
COMBINATION.........................5-9
VALVE - DIAGNOSIS AND TESTING,
ONE-WAY CHECK.....................25-30
VALVE - DIAGNOSIS AND TESTING,
OVERFLOW.........................14-84
VALVE - INSPECTION, OIL PRESSURE
RELIEF.............................9-297
VALVE - INSTALLATION, COMBINATION....5-10
VALVE - INSTALLATION, OIL PRESSURE
RELIEF.............................9-298
VALVE - INSTALLATION, ONE WAY
CHECK.............................25-30
VALVE - INSTALLATION, OVERFLOW.....14-85
VALVE - INSTALLATION, ROLLOVER......14-27
VALVE - INSTALLATION, SPOOL.........19-26
VALVE - INSTALLATION, VACUUM CHECK . . . 24-29
VALVE - OPERATION, COMBINATION.......5-9
VALVE - OPERATION, HIGH PRESSURE
RELIEF.............................24-46
VALVE - OPERATION, ONE WAY CHECK . . . 25-30
VALVE - OPERATION, OVERFLOW........14-83
VALVE - OPERATION, TORQUE
CONVERTER DRAINBACK . 21-262,21-432,21-605,
21-778
VALVE - OPERATION, VACUUM CHECK....24-28
VALVE - REMOVAL, COMBINATION........5-10
VALVE - REMOVAL, OIL PRESSURE
RELIEF.............................9-297
VALVE - REMOVAL, ONE WAY CHECK....25-30
VALVE - REMOVAL, OVERFLOW.........14-84
VALVE - REMOVAL, ROLLOVER.........14-26
VALVE - REMOVAL, SPOOL.............19-24
VALVE - REMOVAL, VACUUM CHECK.....24-29
VALVE - STANDARD PROCEDURE,
TORQUE CONVERTER DRAINBACK.....21-262,
21-432,21-606,21-778
VALVE - V-6/V-8 ENGINES - DIAGNOSIS
AND TESTING, PCV...................25-36
VALVE BODY - ADJUSTMENTS . . 21-304,21-476,
21-646,21-818
VALVE BODY - ASSEMBLY......21-294,21-466,
21-638,21-810
VALVE BODY - CLEANING......21-293,21-465,
21-637,21-808
VALVE BODY - DESCRIPTION....21-263,21-433,
21-607,21-780
VALVE BODY - DISASSEMBLY . . . 21-282,21-453,
21-626,21-799
VALVE BODY - INSPECTION.....21-293,21-465,
21-637,21-809
VALVE BODY - INSTALLATION . . . 21-303,21-475,
21-645,21-818
VALVE BODY - OPERATION.....21-267,21-438,
21-611,21-783
VALVE BODY - REMOVAL . 21-281,21-452,21-625,
21-798
VALVE CABLE - ADJUSTMENTS,
TRANSMISSION THROTTLE.....21-254,21-425,
21-598,21-771
VALVE CABLE - DESCRIPTION,
THROTTLE.......21-253,21-424,21-597,21-770
VALVE LASH ADJUSTMENT AND
VERIFICATION - STANDARD
PROCEDURE........................9-256
VALVE SERVICE, INTAKE/EXHAUST
VALVES & SEATS ....................9-195
VALVE SPRINGS - INSTALLATION,
VALVES
............................9-199
VALVE SPRINGS - REMOVAL, VALVES
....9-197
VALVE STEM SEAL - INSTALLATION
......9-198
VALVE STEM SEALS - REMOVAL
........9-197
VALVES & SEATS - CLEANING,
INTAKE/EXHAUST
.......9-140,9-198,9-27,9-84VALVES & SEATS - DESCRIPTION,
INTAKE/EXHAUST . . 9-138,9-195,9-25,9-253,9-81
VALVES & SEATS - INSPECTION,
INTAKE/EXHAUST.......9-141,9-198,9-27,9-84
VALVES & SEATS - INSTALLATION,
INTAKE/EXHAUST.......9-141,9-260,9-28,9-85
VALVES & SEATS - REMOVAL,
INTAKE/EXHAUST.......9-140,9-258,9-27,9-84
VALVES & SEATS - STANDARD
PROCEDURE-VALVES,GUIDES AND
SPRINGS, INTAKE/EXHAUST............9-253
VALVES & SEATS - VALVE SERVICE,
INTAKE/EXHAUST....................9-195
VALVES AND VALVE SPRINGS -
INSTALLATION.......................9-199
VALVES AND VALVE SPRINGS -
REMOVAL..........................9-197
VALVES, GUIDES AND SPRINGS -
STANDARD PROCEDURE......9-138,9-25,9-82
VANITY LAMP - INSTALLATION.........8L-37
VANITY LAMP - REMOVAL.............8L-37
VAPOR CANISTER - DESCRIPTION.......25-37
VAPOR CANISTER - INSTALLATION......25-38
VAPOR CANISTER - INSTALLATION,
CRANKCASE BREATHER...............9-242
VAPOR CANISTER - OPERATION.........25-37
VAPOR CANISTER - REMOVAL..........25-37
VAPOR CANISTER - REMOVAL,
CRANKCASE BREATHER...............9-241
VARIATION ADJUSTMENT - STANDARD
PROCEDURE, COMPASS...............8M-4
VECI LABEL - DESCRIPTION...........Intro.-10
VECI LABEL - OPERATION...........Intro.-10
VEHICLE IDENTIFICATION NUMBER -
DESCRIPTION.....................Intro.-10
VEHICLE PREPARATION - DESCRIPTION,
THE IMPORTANCE OF CAREFUL NEW......30-1
VEHICLE PREPARATION FORM, FINAL
STEPS - NEW.......................30-22
VEHICLE SAFETY CERTIFICATION LABEL
- DESCRIPTION....................Intro.-12
VEHICLE SPEED INPUT - DESCRIPTION....8P-1
VEHICLE THEFT SECURITY -
DESCRIPTION........................8Q-1
VEHICLE THEFT SECURITY - OPERATION . . 8Q-2
VEHICLE THEFT SECURITY SYSTEM -
DIAGNOSIS AND TESTING..............8Q-3
VENT - INSTALLATION, BODY..........23-126
VENT - INSTALLATION, EXHAUST........23-79
VENT - REMOVAL, BODY.............23-126
VENT - REMOVAL, EXHAUST...........23-79
VENT GLASS - INSTALLATION, BACKLITE . 23-147
VENT GLASS - REMOVAL, BACKLITE....23-147
VENT HOSE - OPERATION, CRANKCASE . . . 25-32
VENT WINDOW - INSTALLATION........23-85
VENT WINDOW - REMOVAL............23-85
VERIFICATION - STANDARD
PROCEDURE, VALVE LASH
ADJUSTMENT.......................9-256
VERIFICATION TEST - STANDARD
PROCEDURE.........................8O-5
VIBRATION - DIAGNOSIS AND TESTING,
TIRE NOISE OR.......................22-8
VIBRATION DAMPER - INSPECTION......9-289
VIBRATION DAMPER - INSTALLATION....9-156,
9-212,9-289,9-42,9-99
VIBRATION DAMPER - REMOVAL . . 9-155,9-212,
9-289,9-42,9-99
VIEW MIRROR - INSTALLATION, REAR . . 23-126
VIEW MIRROR - INSTALLATION, SIDE....23-97
VIEW MIRROR - LOW MOUNTED -
INSTALLATION, SIDE..................23-98
VIEW MIRROR - LOW MOUNTED -
REMOVAL, SIDE.....................23-98
VIEW MIRROR - REMOVAL, REAR......23-126
VIEW MIRROR - REMOVAL, SIDE........23-97
VIEW MIRROR FLAG - INSTALLATION,
SIDE..............................23-74
VIEW MIRROR FLAG - REMOVAL, SIDE . . . 23-74
VIEW MIRROR GLASS - INSTALLATION,
SIDE
..............................23-98
VIEW MIRROR GLASS - REMOVAL, SIDE
. . 23-98
VISCOUS CLUTCH - 3.9L/5.2L/5.9L/8.0L -
DESCRIPTION, FAN DRIVE
..............7-56
VISCOUS CLUTCH - 3.9L/5.2L/5.9L/8.0L -
OPERATION, FAN DRIVE
................7-56
VISCOUS CLUTCH - 5.9L DIESEL -
DESCRIPTION, FAN DRIVE
..............7-57VISCOUS CLUTCH - 5.9L DIESEL -
OPERATION, FAN DRIVE................7-57
VISCOUS FAN DRIVE - DIAGNOSIS AND
TESTING........................7-56,7-58
VISOR - INSTALLATION, SUN..........23-127
VISOR - REMOVAL, SUN..............23-127
VISUAL - INSPECTION.................30-8
VISUAL INSPECTION, 3.9L/5.2L/5.9L
ENGINES...........................14-28
VISUAL INSPECTION, 8.0L ENGINE......14-32
VOLT SUPPLIES - DESCRIPTION, 5......8E-17
VOLT SUPPLIES - OPERATION, 5........8E-19
VOLTAGE DROP - STANDARD
PROCEDURE, TESTING FOR A........8W-01-7
VOLTAGE GAUGE - DESCRIPTION........8J-33
VOLTAGE GAUGE - OPERATION..........8J-34
VOLTAGE POTENTIAL - STANDARD
PROCEDURE, TESTING..............8W-01-6
VOLTAGE REGULATOR - DESCRIPTION....8F-31
VOLTAGE REGULATOR - OPERATION.....8F-31
VOLTAGE TEST - STANDARD
PROCEDURE, OPEN-CIRCUIT...........8F-13
VOLUME CHECK - STANDARD
PROCEDURE, OIL PUMP . 21-209,21-379,21-554,
21-724
VTSS INDICATOR - DESCRIPTION........8Q-3
VTSS INDICATOR - DIAGNOSIS AND
TESTING............................8Q-3
VTSS INDICATOR - OPERATION..........8Q-3
WAIT-TO-START INDICATOR -
DESCRIPTION.......................8J-34
WAIT-TO-START INDICATOR -
OPERATION.........................8J-35
WARNING, CLUTCH.....................6-2
WARNING, HYDRAULIC/MECHANICAL......5-5
WARNING, RESTRAINTS................8O-3
WARNING SYSTEM - DESCRIPTION,
CHIME..............................8B-1
WARNING SYSTEM - DESCRIPTION,
TURN SIGNAL & HAZARD...............8L-2
WARNING SYSTEM - DIAGNOSIS AND
TESTING, CHIME......................8B-2
WARNING SYSTEM - DIAGNOSIS AND
TESTING, TURN SIGNAL & HAZARD.......8L-3
WARNING SYSTEM - OPERATION,
CHIME..............................8B-1
WARNING SYSTEM - OPERATION, TURN
SIGNAL & HAZARD....................8L-2
WARNINGS, BODY - SAFETY
PRECAUTIONS........................23-1
WARNINGS, GENERAL..............8W-01-5
WASHER FLUID INDICATOR -
DESCRIPTION.......................8J-35
WASHER FLUID INDICATOR -
DIAGNOSIS AND TESTING..............8J-36
WASHER FLUID INDICATOR -
OPERATION.........................8J-35
WASHER FLUID LEVEL SWITCH -
DESCRIPTION........................8R-7
WASHER FLUID LEVEL SWITCH -
INSTALLATION.......................8R-8
WASHER FLUID LEVEL SWITCH -
OPERATION..........................8R-7
WASHER FLUID LEVEL SWITCH -
REMOVAL...........................8R-8
WASHER HOSES/TUBES - DESCRIPTION . . . 8R-8
WASHER HOSES/TUBES - OPERATION.....8R-8
WASHER NOZZLE - DESCRIPTION........8R-9
WASHER NOZZLE - INSTALLATION.......8R-9
WASHER NOZZLE - OPERATION..........8R-9
WASHER NOZZLE - REMOVAL...........8R-9
WASHER PUMP/MOTOR - DESCRIPTION . . . 8R-9
WASHER PUMP/MOTOR - INSTALLATION . 8R-10
WASHER PUMP/MOTOR - OPERATION....8R-9
WASHER PUMP/MOTOR - REMOVAL.....8R-10
WASHER RESERVOIR - DESCRIPTION....8R-10
WASHER RESERVOIR - INSTALLATION . . . 8R-11
WASHER RESERVOIR - OPERATION......8R-10
WASHER RESERVOIR - REMOVAL.......8R-10
WASHER SYSTEM - CLEANING, WIPER....8R-6
WASHER SYSTEM - DIAGNOSIS AND
TESTING, WIPER
.....................8R-3
WASHER SYSTEM - INSPECTION, WIPER
. . 8R-6
WATER DRAINING AT FUEL FILTER -
STANDARD PROCEDURES
..............14-56
WATER IN FUEL SENSOR -
DESCRIPTION
.......................14-85
WATER IN FUEL SENSOR - OPERATION
. . . 14-85
38 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

WATER IN FUEL SENSOR - REMOVAL....14-85
WATER LEAKS - DIAGNOSIS AND
TESTING............................23-2
WATER PUMP - 3.9L/5.2L/5.9L -
CLEANING...........................7-69
WATER PUMP - 3.9L/5.2L/5.9L -
DESCRIPTION........................7-67
WATER PUMP - 3.9L/5.2L/5.9L -
INSPECTION.........................7-69
WATER PUMP - 3.9L/5.2L/5.9L -
INSTALLATION........................7-70
WATER PUMP - 3.9L/5.2L/5.9L -
OPERATION..........................7-67
WATER PUMP - 3.9L/5.2L/5.9L -
REMOVAL...........................7-67
WATER PUMP - 5.9L DIESEL -
CLEANING...........................7-73
WATER PUMP - 5.9L DIESEL -
DESCRIPTION........................7-73
WATER PUMP - 5.9L DIESEL -
INSPECTION.........................7-73
WATER PUMP - 5.9L DIESEL -
INSTALLATION........................7-74
WATER PUMP - 5.9L DIESEL -
OPERATION..........................7-73
WATER PUMP - 5.9L DIESEL - REMOVAL . . 7-73
WATER PUMP - 8.0L - CLEANING........7-72
WATER PUMP - 8.0L - INSPECTION.......7-72
WATER PUMP - 8.0L - INSTALLATION.....7-72
WATER PUMP - 8.0L - REMOVAL.........7-70
WATER PUMP - DIAGNOSIS AND
TESTING......................7-67,7-70,7-73
WATER PUMP BYPASS HOSE WITH AIR
CONDITIONING - INSTALLATION..........7-77
WATER PUMP BYPASS HOSE WITH AIR
CONDITIONING - REMOVAL.............7-74
WATER PUMP BYPASS HOSE WITHOUT
AIR CONDITIONING - INSTALLATION......7-78
WATER PUMP BYPASS HOSE WITHOUT
AIR CONDITIONING - REMOVAL..........7-77
WATER SEPARATOR - DESCRIPTION,
FUEL FILTER........................14-59
WATER SEPARATOR - INSTALLATION,
FUEL FILTER........................14-61
WATER SEPARATOR - OPERATION, FUEL
FILTER.............................14-59
WATER SEPARATOR - REMOVAL, FUEL
FILTER.............................14-60
WATER TO OIL COOLER - REMOVAL......7-87
WATERDAM - INSTALLATION......23-75,23-85
WATERDAM - REMOVAL..........23-75,23-85
WATER-IN-FUEL INDICATOR -
DESCRIPTION.......................8J-36
WATER-IN-FUEL INDICATOR -
OPERATION.........................8J-37
WAY CHECK VALVE - DESCRIPTION, ONE . 25-30
WAY CHECK VALVE - INSTALLATION,
ONE ...............................25-30
WAY CHECK VALVE - OPERATION, ONE . . . 25-30
WAY CHECK VALVE - REMOVAL, ONE....25-30
WEAR INDICATORS - DIAGNOSIS AND
TESTING, TREAD......................22-7
WEAR PATTERNS - DIAGNOSIS AND
TESTING, TIRE.......................22-7
WEATHERSTRIP - INSTALLATION, COWL . 23-153
WEATHERSTRIP - INSTALLATION, FRONT
DOOR GLASS RUN..................23-154WEATHERSTRIP - INSTALLATION, FRONT
DOOR INNER BELT..................23-154
WEATHERSTRIP - INSTALLATION, FRONT
DOOR OUTER BELT..................23-154
WEATHERSTRIP - INSTALLATION, FRONT
DOOR SECOND.....................23-155
WEATHERSTRIP - REMOVAL, COWL.....23-153
WEATHERSTRIP - REMOVAL, FRONT
DOOR GLASS RUN..................23-153
WEATHERSTRIP - REMOVAL, FRONT
DOOR INNER BELT..................23-154
WEATHERSTRIP - REMOVAL, FRONT
DOOR OUTER BELT..................23-154
WEATHERSTRIP - REMOVAL, FRONT
DOOR SECOND.....................23-154
WELD LOCATIONS, SPECIFICATIONS......23-4
WET SANDING/BUFFING & POLISHING -
DESCRIPTION......................23-130
WHEEL - INSTALLATION, STEERING......19-13
WHEEL - REMOVAL, STEERING.........19-13
WHEEL ALIGNMENT - DESCRIPTION.......2-1
WHEEL ALIGNMENT - OPERATION.........2-2
WHEEL BALANCE - STANDARD
PROCEDURES, TIRE...................22-4
WHEEL COVER - REMOVAL............22-12
WHEEL COVERS - INSTALLATION........30-10
WHEEL CYLINDERS - ASSEMBLY.........5-31
WHEEL CYLINDERS - CLEANING.........5-31
WHEEL CYLINDERS - DISASSEMBLY......5-31
WHEEL CYLINDERS - INSPECTION........5-31
WHEEL CYLINDERS - INSTALLATION......5-32
WHEEL CYLINDERS - REMOVAL..........5-31
WHEEL INSPECTION - DIAGNOSIS AND
TESTING
...........................22-10
WHEEL INSTALLATION - STARDARD
PROCEDURE, DUAL REAR
.............22-10
WHEEL RUNOUT - DIAGNOSIS AND
TESTING, TIRE
.......................22-1
WHEELHOUSE LINER - INSTALLATION,
REAR
..............................23-96
WHEELHOUSE LINER - REMOVAL, REAR
. . 23-96
WHEELS - DESCRIPTION
...............22-9
WHEELS - OPERATION
................22-10
WINCH - INSTALLATION, SPARE TIRE
....13-10
WINCH - REMOVAL, SPARE TIRE
........13-10
WIND NOISE - DIAGNOSIS AND TESTING
. . 23-3
WIND NOISE - INSPECTION, SQUEAKS,
RATTLES
...........................30-15
WINDOW - INSTALLATION, QUARTER
. . . 23-151
WINDOW - INSTALLATION, VENT
........23-85
WINDOW - REMOVAL, QUARTER
.......23-151
WINDOW - REMOVAL, VENT
............23-85
WINDOW MOTOR - DESCRIPTION
.......8N-26
WINDOW MOTOR - DIAGNOSIS AND
TESTING
...........................8N-26
WINDOW MOTOR - REMOVAL
..........8N-26
WINDOW REGULATOR - INSTALLATION
. . . 23-76
WINDOW REGULATOR - REMOVAL
......23-75
WINDOW SWITCH - DESCRIPTION,
POWER
............................8N-24
WINDOW SWITCH - DIAGNOSIS AND
TESTING, POWER
....................8N-24
WINDOW SWITCH - INSTALLATION,
POWER
............................8N-26WINDOW SWITCH - OPERATION, POWER . 8N-24
WINDOW SWITCH - REMOVAL, POWER . . 8N-25
WINDOWS - DESCRIPTION, POWER.....8N-23
WINDOWS - DIAGNOSIS AND TESTING,
POWER............................8N-23
WINDOWS - OPERATION, POWER.......8N-23
WINDOWS, DOORS AND LOCKS -
INSPECTION........................30-14
WINDSHIELD - DESCRIPTION..........23-148
WINDSHIELD - INSTALLATION.........23-148
WINDSHIELD - REMOVAL.............23-148
WINDSHIELD WIPERS/WASHERS, ROAD
TEST - INSPECTION..................30-18
WIPER & WASHER SYSTEM - CLEANING . . 8R-6
WIPER & WASHER SYSTEM -
DIAGNOSIS AND TESTING..............8R-3
WIPER & WASHER SYSTEM -
INSPECTION.........................8R-6
WIPER ARM - DESCRIPTION...........8R-11
WIPER ARM - INSTALLATION...........8R-12
WIPER ARM - OPERATION.............8R-12
WIPER ARM - REMOVAL..............8R-12
WIPER BLADE - DESCRIPTION..........8R-12
WIPER BLADE - INSTALLATION.........8R-13
WIPER BLADE - OPERATION...........8R-13
WIPER BLADE - REMOVAL.............8R-13
WIPER MODULE - DESCRIPTION
........8R-14
WIPER MODULE - INSTALLATION
.......8R-15
WIPER MODULE - OPERATION
..........8R-14
WIPER MODULE - REMOVAL
...........8R-14
WIPER RELAY - DESCRIPTION
..........8R-15
WIPER RELAY - DIAGNOSIS AND
TESTING
...........................8R-16
WIPER RELAY - INSTALLATION
.........8R-17
WIPER RELAY - OPERATION
...........8R-15
WIPER RELAY - REMOVAL
.............8R-17
WIPERS/WASHERS - DESCRIPTION
.......8R-1
WIPERS/WASHERS - OPERATION
........8R-2
WIPERS/WASHERS, ROAD TEST -
INSPECTION WINDSHIELD
.............30-18
WIRE SPLICING - STANDARD
PROCEDURE
.....................8W-01-12
WIRING - INSPECTION
.................30-7
WIRING DIAGRAMS - DESCRIPTION,
HOW TO USE
.....................8W-01-1
WIRING HARNESS - DIAGNOSIS AND
TESTING
.........................8W-01-5
WIRING/TERMINAL - SPECIAL TOOLS
. . 8W-01-8
WITHOUT AIR CONDITIONING -
INSTALLATION, WATER PUMP BYPASS
HOSE
...............................7-78
WITHOUT AIR CONDITIONING -
REMOVAL, WATER PUMP BYPASS
HOSE
...............................7-77
WITHOUT RADIATOR IN-TANK
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE, FLUSHING
COOLER AND TUBES
..........7-80,7-83,7-86
WORM SHAFT - INSTALLATION
.........19-29
WORM SHAFT - REMOVAL
.............19-27
WORN THREADS - STANDARD
PROCEDURE, REPAIR
DAMAGED OR
.....9-11,9-125,9-181,9-238,9-68
BR/BEINDEX 39
Description Group-Page Description Group-Page Description Group-Page