seat memory FORD EXPEDITION 2015 3.G Quick Reference Guide
Page 8 of 10
SYNC® WITH MYFORD TOUCH®* (CONTINUED)COMFORT 
SEATING-TO-CARGO VERSATILITY
Note: Before folding the second- or third-
row seats, make sure to flip down the head 
restraints by pulling on the strap, and remove all 
items from the floor and seats. 
TO FOLD THE FLAT-FOLDING THIRD-ROW 
SEATS TO THE LOAD FLOOR
Pull up on the Handle located behind the 
seatback while pushing the seatback forward 
and down into the seat cushion. 
Note: You may need to exert a moderate force 
to move the seat forward and down. 
To return the seats to an upright  
seating position
Lift and pull the seat rearward until the  
latch engages fully. 
Pull Strap
Handle
E-Z ENTRY INTO THE  
THIRD-ROW SEATS
The E-Z entry seat allows for easier 
entry and exit to and from the  
third-row seat.
To enter the third-row seating area 
 1.  Fold the head restraint forward. 
2.  Pull up on Lever 1. 
3.    Fold down the second-row seat  
and release the handle.
4.   Pull the handle up again until the  
seat releases from the floor. 
5.   Push the seat upward and fold it 
away from the third row. 
To return the seat to an upright  
seating position
 1.    Push the seat down and latch it to  
the floor.
2.    Bring the seatback to an upright 
position. It should lock into position.
3.    Lift up on the head restraint until it 
locks into its original position.
 
Lever 1
Position 2
Position 3
  page 15 page 14*if equipped
 CLIMATE
SYNC with MyFord Touch controls the 
temperature, airflow direction, fan speed 
and other climate features like climate 
controlled front seats* and rear climate 
control* for you and your passengers. 
To use voice commands to operate 
climate, say a voice command like “Climate 
temperature 72 degrees” and MyFord 
Touch will make that adjustment.
SET YOUR MYTEMP
  •  Touch the lower-right blue corner on  
the touchscreen.
  •  Set your exact, desired temperature 
using the (+) or (–) buttons.
  •  Press and hold the MyTemp button 
until the background color goes solid.
ACCESS YOUR REAR CLIMATE CONTROL*
Press the Climate corner of the touchscreen 
and then touch the Rear  button on the 
lower-right corner to activate the rear 
climate control. Adjust rear temperature 
and fan speed from the touchscreen or 
give second-row passengers access to their 
independent control.
 ENTERTAINMENT
No matter how you store your music, SYNC 
makes it yours to enjoy when you’re behind 
the wheel. Just press the lower-left red 
corner of the touchscreen. From here, you 
can easily go between AM/FM, SiriusXM 
and other media sources. 
SET YOUR RADIO PRESETS
  •  Touch the lower-left corner  
on the touchscreen.
  •  Touch  FM.
  •  Touch  Direct Tune.
  •   Enter the desired station  
and touch Enter.
  •  Touch  Presets  and then touch  
and hold one of the memory preset 
buttons to save it. The sound mutes 
and then returns after it saves  
the station.
BRING IN YOUR OWN MUSIC
Gain access to any audio source by voice 
and even control how each operates, like 
changing radio stations, CD tracks or music 
on one of the following devices: 
  •  CD
  •  USB
  •  Bluetooth
® streaming
  •  Audio line in
Refer to the MyFord Touch chapter in  
your Owner’s Manual, visit the website 
or call the toll-free number for more 
information. See the inside front cover  
of this guide for details.   
Page 9 of 10
COMFORT (CONTINUED) 
AMBIENT LIGHTING*
When activated, ambient lighting illuminates key areas of your 
interior with a choice of colors. 
To access and make adjustments
1.  Press the Settings icon > Vehicle > Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease the intensity.
To turn the feature on or off, press the power button.
REAR HEATED SEATS*
Press the heated seat  control repeatedly to cycle through the 
settings and off. More lights indicate a higher setting.
MEMORY FEATURE*
The memory function saves and recalls the positions of the driver 
seat, power mirrors and adjustable pedals. Use the memory 
controls located on the left side of the driver’s seat 
  to 
program and then recall memory positions.
To program
1.    Switch on the ignition. 
2.   Move the memory features to your desired position. 
3.   Press and hold the 1 button 
 until you hear a tone. 
Use this same procedure to set the second position using the  
2 button 
. 
You can now use these controls to recall the set  
memory positions.
COMFORT (CONTINUED)
POWERFOLD® THIRD-ROW SEAT*
The 60/40 split-folding bench seat uses 
a power-activated seatback release. Fold 
one side or both down for more flexibility.
The controls are located on the right-hand 
rear quarter trim panel that is accessible 
from the liftgate area.
Note: Make sure you unfasten all of the 
safety belts.
To lower
1.    Make sure you fold the head restraints 
down first.
2.   Press and hold the FOLD control. 
Release the control once the seats  
fold completely.
3.   To return the seatback to its original 
position, press and hold the UP control. 
Release the control once the seats return 
to the upright position. Note: The power-folding seats operate for 
10 minutes after you switch the ignition off. 
The transmission must be in park (P) and 
the liftgate or liftgate glass must be open.
LEATHER CLEANING
For cleaning and removing spots and 
stains, use Motorcraft® Premium Leather 
and Vinyl Cleaner** or a commercially 
available leather cleaning product for 
automotive interiors.
Note: Test any cleaning product on an 
inconspicuous area first. 
Do not use the following products as these 
may damage the leather:
  •  Oil and petroleum or silicone-based 
leather conditioners.
  • Household cleaners.
  • Alcohol solutions.
  •  Solvents or cleaners intended 
specifically for rubber, vinyl  
and plastics. 
For complete information, see the Vehicle 
Care  chapter of your Owner’s Manual.
MOONROOF*
The moonroof control is on the overhead 
console. It has a one-touch open and 
close feature. To stop its motion during the 
one-touch operation, press the control a 
second time. 
To open, press and release the SLIDE 
control. It stops short of the fully opened 
position to help reduce wind noise. Press 
the SLIDE control again to fully open the 
moonroof. To close, pull and release the 
SLIDE control. 
To vent, press and release the TILT control. 
Pull and hold the TILT control to close  
the moonroof. 
Once you close the moonroof, you can still 
open or close the sliding shade manually. 
Pull the shade toward the front of the 
vehicle to close it.
 page 17 page 16*if equipped
**Do not use on the King Ranch seats. See the Vehicle Care Owner’s Manual for details. *if equipped