FORD MUSTANG 2003 Workshop Manual

24. Install the cooling fan, motor and shroud as an assembly, and install the RH mounting bolt.
25. Install the LH cooling fan mounting bolt.
26. Connect the cooling fan electrical connector.
27. Install the supercharger cooling hose assembly and tighten the clamps. Klj . 7 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

28. Connect the lower radiator hose to the coolant bypass tube.
29. Install the supercharger degas bottle and the mounting bolts.
30. Connect the supercharger degas hose.
31. Install the power steering hose bracket and mounting nut. Klj . 8 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

32. Install the power steering reservoir and the fasteners.
33. Connect the power steering hoses.
34. Install the engine coolant degas bottle and the fasteners.
35. Install the degas bottle return hose. Klj . 9 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

36. Connect the radiator vent hose at the degas bottle.
37. Install the radiator sight shield and the push pins.
38. Install the hood prop.
39. Install the A/C muffler.
1. Connect the A/C tube and position the A/C muffler.
2. Install the bracket nut. Klj . 10 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

40.
NOTE: Inspect the O- rings and install new O- rings, if necessary.
NOTE: Lubricate the O- rings with refrigerant oil.
Connect the A/C tube peanut fittings at the condenser.
41. NOTE: Inspect the O- rings and install new O- rings, if necessary.
NOTE: Lubricate the O- rings with refrigerant oil.
Connect the A/C tube.
42. Connect the A/C tube at the accumulator. Klj . 11 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

43. Connect the radiator upper hose, the radiator lower hose and the supercharger degas hose.
44. Connect the heater hoses.
45. Install the wiring harness to the dash panel.
46. Connect the vacuum hoses. Klj . 12 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

47. Connect the 16-
pin and the 42-pin electrical connectors.
48. NOTE: Install a new gasket, if necessary.
Install the throttle body and spacer assembly and the mounting nuts.
49. Position the accelerator and speed control cables.
50. Install the accelerator cable bracket bolts. Klj . 13 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

51. Connect the accelerator controls.
zConnect the accelerator cable.
z If equipped, connect the speed control cable.
52. Connect the fuel tube spring lock coupling. For additional information, refer to Section 310 - 00 .
53. Connect the A/C pressure switch electrical connector.
54. Connect the vacuum hose. Klj . 14 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

55. Connect the idle air control (IAC) and the throttle position (TP) electrical connectors.
56. Install the air cleaner outlet pipe and tighten the clamps.
57. Connect the vacuum hose.
58. Connect the breather hose.
59. Connect the intake air temperature (IAT) sensor electrical connector. Klj . 15 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

60.
NOTE: Use reference marks made during removal to aid in the installation.
Install the hood and the four nuts.
61. Install the hood- to-body ground strap.
62. Connect the battery ground cable. For additional information, refer to Section 414 - 01 .
63. Fill the crankcase with clean engine oil and check that all other fluids are at the correct levels.
64. Fill and bleed the engine cooling system. For additional information, refer to Section 303 - 03A .
65. Fill and purge the power steering system. For additional information, refer to Section 211 - 00 .
66. Start the engine and check for leaks. Stop the engine and recheck the fluid levels.
67. Charge the A/C system. For additional information, refer to Section 412 - 00 . Klj . 16 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...