lumbar support FORD MUSTANG 2003 Workshop Manual

DESCRIPTION AND OPERATION
Seats
Seats —
Front Power
The front power seat features:
za six- way seat regulator control switch (14A701) located on the front of the seat.
z a seat track (61705) mounted under the seat.
z a seat regulator motor (14547) and gear housing mounted on the seat track (61705).
z an optional power lumbar switch located on the outboard side of the seat (14C715).
z a manual seat backrest release handle on the outboard rear corner of the seat.
z an optional power bolster and lumbar switches located on the inboard side of the seat (Cobra
only)
Seats — Power Lumbar Support
NOTE: The pump and solenoid module are serviced as an assembly with the front seat cushion frame
(Cobra only). The backrest bolster/lumbar adjusting pads are serviced together and the cushion
bolsters are serviced separately.
The power lumbar support system consists of: SECTION 501-
10: Seating 2003 Mustang Workshop Manual Item Part Number Description
1 611A08 Front seat backrest head restraint
2 65500 Front seat backrest pad adjuster
3 14C715 Seat control switch
4 14A701 Lumbar control switch
5 — Bolster and lumbar control switches (Cobra only) Klj . 1 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Lumbar Control Switch
Removal and Installation
All vehicles
1. Remove the front seat. For additional information, refer to Seat — Front Power in this section.
Vehicles with standard power lumbar 2. Pull to remove the lumbar control switch (14C715).
3. Disconnect the power lumbar support air hoses.
4. Disconnect the lumbar seat control switch electrical connector.
5. Remove the lumbar seat control switch.
SECTION 501-
10: Seating 2003 Mustang Workshop Manual Klj . 1 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

6. Disconnect the power lumbar support air hose.
7. Remove the seat backrest adjuster (65500).
Vehicles with power bolster and lumbar 8. Disconnect the lumbar and bolster air supply hoses.
9. Remove the two screws and remove the lumbar and bolster adjuster pad. Klj . 2 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

6. Remove the front seat backrest pad adjusting pump (65530).
1. Disconnect the electrical connector.
2. Disconnect the power lumbar support air hose.
Vehicles with power bolster and lumbar 7. Remove the driver seat backrest latch. For additional information, refer to Latch — Front Seat
Backrest in this section.
8. Remove the pivot bolt and seat backrest. zDisconnect the power lumbar support air hoses.
9. Release the J- clips. Klj . 2 ba
32003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

6. Disconnect the power lumbar support air hoses.
7. Disconnect the lumbar seat control switch electrical connector and remove the lumbar control
switch.
Vehicles with power bolster and lumbar
NOTE: For vehicles with lumbar and bolster, the pump and solenoid module are serviced as part of the
seat cushion frame.
8. Remove the power lumbar and bolster seat switch screws. Klj . 2 ba
42003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...