HONDA ODYSSEY 2020 Navigation Manual (in English)

29
uuPersonal InformationuSaved Trips
System SetupH (Home)uNavigationuumyTrips
1.Select a trip.
2.Select .
3.Select Delete Trip.
H (Home)uNavigationuumyTrips
1.Select .
2.Select Delete Trips.
3.Select a trip to delete.
uSelect Select All to delete all
trips.
4.Select Delete.
■Deleting a Saved Trip
■Deleting Saved Trips

30
System Setup
Display Mode Settings
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display Mode) icon to cycle through the display modes (Day to Night to Off).
Press the (Display Mode) icon.
uThe brightness bar is displayed for
a few seconds.
uSelect or to adjust the
brightness.1Switching Display Mode Manually
You can also adjust the display brightness by sliding
or swiping on the brightness bar.
You can change the touchscreen sensitivity setting.
2Refer to the Owners Manual.

31
uuDisplay Mode SettingsuSwitching Display Mode Manually
System SetupIllumination
controlOperation
(Display
Mode) iconSelects Day or Night display mode when the user
wants to change the brightness of the display
temporarily.
Remember: This icon overrides all other display
brightness adjustments either set automatically by
the sunlight sensor or manually from the System
settings screen.
Sunlight sensor
*
(see your Owner’s
Manual for
location)If the sunlight sensor detects daylight and the
headlights are turned on, the system automatically
overrides the Night display and displays the Day
display mode.
Remember: If desired, use the (Display Mode)
icon to override this automatic choice.
Dash illumination
adjustment knob
(see your Owner’s
Manual for
location)When the headlights are turned on, and you wish to
have the Day display mode, adjust the illumination
to the full brightness (beeps).
Remember: Adjust the dash brightness back to
midrange to allow auto switching by sensing the
headlights are on or off.
Headlights (Auto/
On/Off)When turned on, the display changes to Night
display mode.
The previous three controls listed above can
“cancel” this function.
Remember: Use the (Display Mode) icon, to
adjust the dash illumination to full brightness, or set
the display to your desired choice.
* Not available on all models

32
System Setup
Guidance Volume Settings
H (Home)uNavigationuuGuidance Volume
Adjust the navigation system volume level.
Select or to adjust the
guidance volume.
uSelect Mute to mute the
guidance.1Guidance Volume Settings
You can also adjust the volume by sliding or swiping
on the volume bar.
This option is accessible on any screen that includes
the options menu icon.
Select to open the options menu, and then select
Guidance Volume.
During the voice guidance, you can adjust the
guidance volume using the volume knob.

33
System Setup
Map and Vehicle
H (Home)uNavigationuuSettingsuMap and Vehicle
Change the map settings.
Select an option.
The following options are available:
•Vehicle Selection: Changes the icon to represent your position on the map.
2Vehicle Selection P. 34
•Driving Map View: Sets the perspective on the map.
2Driving Map View (Map Orientation) P. 35
•Map Theme: Changes the color of the map data.
2Map Theme P. 36
•Map Layer: Sets the data that appears on the map.
2Map Layer P. 37
•myMaps: View installed maps the system uses.
2myMaps P. 38
•Map Updates:View the instructions for map updates.
2Map Updates P. 39

34
uuMap and VehicleuVehicle Selection
System Setup
Vehicle Selection
H (Home)uNavigationuuSettingsuMap and VehicleuVehicle
Selection
You can choose your vehicle icon.
1.Select or to choose the
desired icon.
2.Select Save.1Vehicle Selection
The factory default is set to .

35
uuMap and VehicleuDriving Map View (Map Orientation)
System Setup
Driving Map View (Map Orientation)
H (Home)uNavigationuuSettingsuMap and VehicleuDriving
Map View
Select the map orientation.
1.Select an option.
2.Select Save.
The following options are available:
•3D (factory default): Displays the map in 3D with your direction of travel facing
upwards.
•Track Up: Displays the map with your direction of travel facing upwards.
•North Up: Displays the map with north always pointing up.

36
uuMap and VehicleuMap Theme
System Setup
Map Theme
H (Home)uNavigationuuSettingsuMap and VehicleuMap
Theme
Changes the color of the map data.
1.Select an option.
2.Select Save.

37
uuMap and VehicleuMap Layer
System Setup
Map Layer
H (Home)uNavigationuuSettingsuMap and VehicleuMap
Layer
Sets the data that appears on the map screen.
1.Select an option(s).
2.Select Save.1Map Layer
Off-Road Breadcrumbs is set to off as factory
default.
You can set the categories of places appear along the
road on the map screen.
Select beside Places along the road, select the
categories to show, and then select Save.

38
uuMap and VehicleumyMaps
System Setup
myMaps
H (Home)uNavigationuuSettingsuMap and VehicleumyMaps
View installed maps the system uses.
Select an item.