ECO mode HYUNDAI I20 2023 User Guide
Page 132 of 649
4-37
04
Manual reset
To clear the average fuel economy
manually, press the [OK] button on the
steering wheel for more than 1 second
when the average fuel economy is
displayed.
Automatic reset
To automatically reset the average fuel
economy after refuelling, select the
"Fuel Econ. Reset" mode in the User
Settings menu on the LCD display.
- After ignition: the average fuel
economy will reset automatically
whenever it has passed 4 hours after
turning OFF the engine.
- After refuelling: the average fuel
economy will reset automatically
when driving speed exceeds 1 mph
(1 km/h), after adding 6 litres (1.6
gallons) of fuel or more.
i Information
7 K H D Y H U D J H I X H O H F R Q R P \ P D \ E H
L Q D F F X U D W H Z K H Q W K H Y H K L F O H G U L Y H V
V K R U W H U W K D Q P L O H V P H W H U V D I W H U
W X U Q L Q J 2 1 W K H ( Q J L Q H 6 W D U W 6 W R S E X W W R Q
Instant Fuel Economy (2)
[ This mode displays the instant fuel
economy during the last few seconds
when the vehicle speed is more than
6.2 mph (10 km/h).
Accumulated Info display
„Type A
OJX1040012E
„Type B
OJX1040067E
This display shows the accumulated trip
distance (1), the average fuel economy
(2), and the total driving time (3).
Page 136 of 649
4-41
04
View modes
View modesFunction
UtilityUtility view displays driving information such as the trip distance, fuel
economy and etc.
Driving AssistDriving Assist view displays the status of the vehicle’s Driving Assistance
systems.
Turn by TurnTurn By Turn view displays the state of the navigation.
The information provided may differ depending on which functions are applicable
to your vehicle.
Page 145 of 649
5-4
Convenient features
ACCESSING YOUR VEHICLE
Remote key (if equipped)
OIB034040
Your HYUNDAI uses a remote key, which
you can use to lock or unlock a door
(and tailgate) and even start the engine.
(1) Door Lock
(2) Door Unlock
(3) Tailgate Unlock
Locking
To lock :
1. Close all doors, engine bonnet and
tailgate.
2. Press the Door Lock button (1) on the
remote key.
3. The doors will lock. The hazard
warning lights will blink once. Also,
the outside rearview mirror will fold,
if the User Settings mode on the LCD
display. For more details, refer to “LCD
Display” in chapter 4.
4. Make sure the doors are locked by
checking the position of the door lock
button inside the vehicle.
WARNING
Do not leave the keys in your
vehicle with unsupervised children.
Unattended children could place the
key in the ignition switch and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
Unlocking
To unlock:
1. Press the Door Unlock button (2) on
the remote key.
2. The doors will unlock. The hazard
warning lights will blink two times.
Also, the outside rearview mirror will
unfold, if the User Settings mode on
the LCD display. For more details,
refer to “LCD Display” in chapter 4.
i Information
After unlocking the doors, the doors will
lock automatically after 30 seconds unless
a door is opened.
Tailgate unlocking
To unlock:
1. Press the Tailgate Unlock button (3)
on the remote key for more than one
second.
2. The hazard warning lights will blink
two times. Once the tailgate is opened
and then closed, the tailgate will lock
automatically.
i Information
Page 211 of 649
5-70
Convenient features
Temperature control
OBC3050111R
The temperature will increase by
pushing the switch to up.
The temperature will decrease by
pushing the switch to down.
The temperature will increase or
decrease by 0.5°C (1°F) for each
incremental location. When set to the
lowest temperature setting, the air
conditioning will operate continuously.
7 H P S H U D W X U H F R Q Y H U V L R Q
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Centigrade.
To change the temperature unit from °C
to °F or °F to °C :
- Automatic climate control system
Press the AUTO button for 3 seconds
whilst pressing the OFF button.
- Instrument cluster
Go to User Settings o Units o
Temperature Unit.
The temperature unit on both the cluster
LCD display and the climate control
screen will change.
Air intake control
OBC3050114R
This is used to select the outside (fresh)
air position or recirculated air position.
To change the air intake control position,
push the control button.
5 H F L U F X O D W H G D L U S R V L W L R Q
With the recirculated air
position selected, air from
the passenger
compartment will be
drawn through the heating
system and heated or
cooled according to the
function selected.
2 X W V L G H I U H V K D L U S R V L W L R Q
With the outside (fresh) air
position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.
Page 218 of 649
5-77
05
WARNING
Windscreen heating
Do not use the
or position
during cooling operation in extremely
humid weather. The difference
between the temperature of the
outside air and that of the windscreen
could cause the outer surface of the
windscreen to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the
position and fan speed control knob or
button to lower speed.
[ ) R U P D [ L P X P G H I U R V W S H U I R U P D Q F H
set the temperature control knob
to the highest temperature setting
(rotated all the way to the right) and
the fan speed control to the highest
setting.
[ , I Z D U P D L U W R W K H I O R R U L V G H V L U H G
whilst defrosting or defogging, set the
mode to the floor-defrost position.
[ % H I R U H G U L Y L Q J F O H D U D O O V Q R Z D Q G L F H
from the windscreen, rear window,
outside rear view mirrors, and all side
windows.
[ & O H D U D O O V Q R Z D Q G L F H I U R P W K H
bonnet and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up inside of the
windscreen.
i Information
, I W K H H Q J L Q H W H P S H U D W X U H L V V W L O O F R O G D I W H U
starting, then a brief engine warm up
period may be required for the vented air
flow to become warm or hot.
Manual climate control system
To defog inside windscreen
OBC3050118
1. Select any fan speed except
"0"position.
2. Select the desired temperature.
3. Select the
or position.
4. The outside (fresh) air will be selected
automatically. Additionally, the
air conditioning (if equipped) will
automatically operate if the mode is
selected to the
position.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the corresponding
button manually.
WINDSCREEN DEFROSTING AND DEFOGGING
Page 229 of 649
5-88
Convenient features
To charge a mobile phone
The wireless mobile phone charging
system charges only the Qi-enabled
mobile phones (
). Read the label on
the mobile phone accessory cover or
Y L V L W \ R X U P R E L O H S K R Q H P D Q X I D F W X U H UT V
website to check whether your mobile
phone supports the Qi technology.
The wireless charging process starts
when you put a Qi-enabled mobile
phone on the wireless charging unit.
1. Remove other items, including the
smart key, from the wireless charging
unit. If not, the wireless charging
process may be interrupted. Place
the mobile phone on the centre of
charging pad.
2. The indicator light is orange when
the mobile phone is charging. The
indicator light turns green when phone
charging is complete.
3. You can turn ON or OFF the wireless
charging function in the User Settings
mode on the instrument cluster. For
further information, refer to the “LCD
Display Modes” in this chapter 4.
If your mobile phone is not charging:
- Slightly change the position of the
mobile phone on the charging pad.
- Make sure the indicator light is orange.
The indicator light will blink orange for
10 seconds if there is a malfunction in
the wireless charging system.
In this case, temporarily stop the
charging process, and re-attempt to
wirelessly charge your mobile phone.
The system warns you with a message
on the LCD display if the mobile phone
is still on the wireless charging unit after
the engine is turned OFF and the front
door is opened.
) R U V R P H P D Q X I D F W X U H U VT P R E L O H S K R Q H V
the system may not warn you even
though the mobile phone is left on the
wireless charging unit. This is due to the
particular characteristic of the mobile
phone and not a malfunction of the
wireless charging.
Page 237 of 649
5-96
Convenient features
VOLUME (VOL + / VOL -) (1)
[ Move the VOLUME toggle switch up to
increase volume.
[ Move the VOLUME toggle switch
down to decrease volume.
SEEK/PRESET ( / ) (2)
If the SEEK/PRESET toggle switch is
moved up or down and held for 0.8
second or more, it will function in the
following modes.
5 $ ' , 2 P R G H
It will function as the AUTO SEEK select
switch. It will SEEK until you release the
switch.
0 ( ' , $ P R G H
It will function as the FF/REW switch.
If the SEEK/PRESET toggle switch is
moved up or down, it will function in the
following modes.
5 $ ' , 2 P R G H
It will function as the PRESET STATION
UP/DOWN switch.
0 ( ' , $ P R G H
It will function as the TRACK UP/ DOWN
switch.
MODE () (3)
Press the MODE button to select RADIO/
MEDIA/Bluetooth Audio, etc.
MUTE () (4, if equipped)
[ 3 U H V V W K H E X W W R Q W R P X W H W K H V R X Q G
[ 3 U H V V W K H E X W W R Q D J D L Q W R D F W L Y D W H W K H
sound.
i Information
' H W D L O H G L Q I R U P D W L R Q I R U D X G L R F R Q W U R O
E X W W R Q V D U H G H V F U L E H G L Q W K H I R O O R Z L Q J
S D J H V L Q W K L V F K D S W H U
Infotainment system (if equipped)
If your vehicle is equipped with
additional navigation, please refer to the
infotainment system manual separately
supplied.
Page 250 of 649
5-109
05
7 X U Q L Q J R Q W K H U D G L R
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [ 7 8 1 (] knob to
select the desired radio mode and
then press the knob.
FM/AM Mode
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to access the following
menu options:
[ $ X W R V W R U H: Save radio stations to the
preset list.
[ 6 F D Q: The system searches for radio
stations with strong radio signals and
plays each radio station for about five
seconds.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level for
each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 0 R G H S R S X S: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
- 7 L P H I R U P D W: Select to display time
in the 12 hour format or the 24 hour
format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the display
language.
5 $ ' , 2
Page 251 of 649
5-110
Convenient features
) 0 $ 0 0 R G H : L W K 5 ' 6
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to access the following
menu options:
[ 7 U D I I L F D Q Q R X Q F H P H Q W: Activate or
deactivate traffic announcements.
Announcements and programmes will
be received automatically if available.
[ $ X W R V W R U H: Save radio stations to the
preset list.
[ 6 F D Q: The system searches for radio
stations with strong radio signals
and plays each option for about five
seconds.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level for
each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 0 R G H S R S X S: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
- 7 L P H I R U P D W: Select to display time
in the 12 hour format or the 24 hour
format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the display
language.
Page 252 of 649
5-111
05
' $ % 0 R G H
(1) Current radio mode
(2) Radio station information
(3) Preset list
Press the [ 0 ( 1 8 & / 2 & .] button on the
control panel to access the following
menu options:
[ 7 U D I I L F D Q Q R X Q F H P H Q W: Activate or
deactivate traffic announcements.
Announcements and programmes will
be received automatically if available.
[ / L V W: Display all available radio
stations.
[ 6 F D Q: The system searches for radio
stations with strong radio signals
and plays each option for about five
seconds.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level for
each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level for
each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set the
volume to be adjusted automatically
according to your driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 0 R G H S R S X S: Set to display mode
selection window when the [AUDIO]
button is pressed on the control panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on the
system display.
-Set time: Set time to display on the
system display.
- 7 L P H I R U P D W: Select to display time
in the 12 hour format or the 24 hour
format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the display
language.