INFINITI QX56 2010 Factory User Guide

PRECAUTIONSACC-3
< PRECAUTION >
C
DE
F
G H
I
J
K L
M A
ACC
NP
O
5. When the repair work is completed, return the ignition switch to the
″LOCK ″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of al l control units using CONSULT-III.
Revision: April 20092010 QX56

ACC-4
< REMOVAL AND INSTALLATION >
ACCELERATOR CONTROL SYSTEM
REMOVAL AND INSTALLATION
ACCELERATOR CONTROL SYSTEM
Removal and InstallationINFOID:0000000005149563
Adjustable Accelerator Pedal
CAUTION:
• Do not disassemble the accelerator pedal adjusting mechanism.
• Before removal and installation the accelerator and brake pedals must be in the frontmost position.
This is to align the base position of the accelerator and brake pedals.
• Do not disassemble the accelerator pedal assembly.
• Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
• Avoid damage from dropping the accel erator pedal assembly during handling.
• Keep the accelerator pedal assembly away from water.
REMOVAL
1. Move the accelerator and brake pedals to the frontmost position.
2. Turn the ignition switch OFF and disconnect the negative battery terminal.
3. Disconnect the adjustable brake pedal cable from the adjustable brake pedal. • Unlock, then pull the adjustable brake pedal cable to disconnect it from the adjustable brake pedal.
LBIA0379E
1. Adjustable accelerator pedal assem-
bly 2. A/T control cable mounting bracket (part
of the accelerator pedal assembly) 3. Adjustable pedal electric motor (part
of the accelerator pedal assembly)
4. Adjustable brake pedal cable (part of the accelerator pedal assembly)
Revision: April 20092010 QX56

ACCELERATOR CONTROL SYSTEMACC-5
< REMOVAL AND INSTALLATION >
C
DE
F
G H
I
J
K L
M A
ACC
NP
O
4. Disconnect the adjustable pedal electric motor electrical connec-
tor.
5. Disconnect the adjustable pedal electric motor memory electri- cal connector.
6. Disconnect the accelerator position sensor electrical connector.
7. Remove the two upper and one lower accelerator pedal nuts.
8. Remove the adjustable accelerator pedal assembly. CAUTION:
• Do not disassemble the accelerator pedal assembly.
• Do not remove the accelerator pedal position sensor fromthe accelerator pedal bracket.
• Do not disassemble the accelerator pedal adjusting mechanism.
• Avoid damage from dropping the acceler ator pedal assembly during handling.
• Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
INSPECTION AFTER INSTALLATION
• Check that the accelerator pedal move s smoothly within the specified ranges.
• Depress and release the accelerator pedal to check that it returns smoothly to the original released position.
• Perform an electrical inspection of the accelerator pedal position sensor. Refer to EC-191, "
Component
Inspection".
CAUTION:
When the harness connector of the accelerator pedal position sensor is disco\
nnected, perform
“Accelerator Pedal Released Position Learning”. Refer to EC-63, "
CONSULT-III Function (ENGINE)".
LBIA0380E
Adjustable accelerator pedal – total pedal applied stroke : 48.3 mm (1.90 in)
Adjustable accelerator pedal – total pedal adjustment travel : 73.2 mm (2.88 in)
Revision: April 20092010 QX56

ACC-6
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Accelerator ControlINFOID:0000000005149564
ADJUSTABLE ACCELERATOR PEDAL
Total Pedal Travel and StrokeUnit: mm (in)
Adjustable accelerator pedal - total pedal applied stroke48.3 (1.90)
Adjustable accelerator pedal - total pedal adjustment travel 73.2 (2.88)
Revision: April 20092010 QX56

ADP-1
BODY INTERIOR
C
DE
F
G H
I
K L
M
SECTION ADP
A
B
ADP
N
O P
CONTENTS
AUTOMATIC DRIVE POSITIONER
BASIC INSPECTION ....... .............................5
DIAGNOSIS AND REPAIR WORKFLOW ..... .....5
Work Flow ........................................................... ......5
INSPECTION AND ADJUSTMENT .....................8
Preliminary Check ............................................... ......8
Special Repair Requirement .....................................8
PRE-INSPECTION FOR DIAGNOSTIC ..............9
Basic Inspection .................................................. ......9
FUNCTION DIAGNOSIS ..............................11
AUTOMATIC DRIVE POSITIONER SYSTEM ....11
AUTOMATIC DRIVE POSITIONER SYSTEM ....... ....11
AUTOMATIC DRIVE POSITIONER SYSTEM :
System Diagram ......................................................
11
AUTOMATIC DRIVE POSITIONER SYSTEM :
System Description .................................................
12
AUTOMATIC DRIVE POSITIONER SYSTEM :
Component Parts Location ......................................
12
AUTOMATIC DRIVE POSITIONER SYSTEM :
Component Description ..........................................
13
MANUAL FUNCTION ............................................ ....14
MANUAL FUNCTION : System Diagram ................15
MANUAL FUNCTION : System Description ............15
MANUAL FUNCTION : Component Parts Loca-
tion ..........................................................................
17
MANUAL FUNCTION : Component Description ....17
MEMORY FUNCTION ........................................... ....18
MEMORY FUNCTION : System Diagram ...............19
MEMORY FUNCTION : System Description ..........19
MEMORY FUNCTION : Component Parts Loca-
tion ..........................................................................
20
MEMORY FUNCTION : Component Description ....21
EXIT ASSIST FUNCTION ...................................... ....22
EXIT ASSIST FUNCTION : System Diagram .........22
EXIT ASSIST FUNCTION : System Description . ....22
EXIT ASSIST FUNCTION : Component Parts Lo-
cation ................................................................... ....
23
EXIT ASSIST FUNCTION :
Component Description ...................................... ....
24
ENTRY ASSIST FUNCTION .................................. ....24
ENTRY ASSIST FUNCTION : System Diagram .....25
ENTRY ASSIST FUNCTION : System Description
....
25
ENTRY ASSIST FUNCTION : Component Parts
Location ...................................................................
26
ENTRY ASSIST FUNCTION :
Component Description ..........................................
27
DIAGNOSIS SYSTEM (DRIVER SEAT C/U) ....28
Diagnosis Description ..............................................28
CONSULT-III Function ............................................28
COMPONENT DIAGNOSIS .........................31
U1000 CAN COMM CIRCUIT ...........................31
Description ........................................................... ....31
DTC Logic ................................................................31
Special Repair Requirement ....................................31
B2112 SLIDING MOTOR ..................................32
Description ...............................................................32
DTC Logic ................................................................32
Diagnosis Procedure ..............................................32
B2113 RECLINING MOTOR .............................33
Description ...............................................................33
DTC Logic ................................................................33
Diagnosis Procedure ..............................................33
B2114 SEAT LIFTER FR ..................................34
Description ...............................................................34
DTC Logic ................................................................34
Diagnosis Procedure ..............................................34
B2115 SEAT LIFTER RR ..................................35
Description ...............................................................35
Revision: April 20092010 QX56

ADP-2
DTC Logic ...............................................................35
Diagnosis Procedure .............................................35
B2117 ADJ PEDAL MOTOR .............................36
Description ..............................................................36
DTC Logic ...............................................................36
Diagnosis Procedure .............................................36
B2118 TILT SENSOR ........................................38
Description ........................................................... ...38
DTC Logic ...............................................................38
Diagnosis Procedure .............................................38
B2120 ADJ PEDAL SENSOR ...........................40
Description ........................................................... ...40
DTC Logic ...............................................................40
Diagnosis Procedure .............................................40
B2126 DETENT SW ...........................................42
Description ........................................................... ...42
DTC Logic ...............................................................42
Diagnosis Procedure .............................................42
B2128 UART COMMUNICATION LINE ............44
Description ........................................................... ...44
DTC Logic ...............................................................44
Diagnosis Procedure .............................................44
POWER SUPPLY AND GROUND CIRCUIT .....46
BCM ........................................................................ ...46
BCM : Diagnosis Procedure ...................................46
DRIVER SEAT CONTROL UNIT ........................... ...47
DRIVER SEAT CONTROL UNIT :
Diagnosis Procedure .............................................
47
DRIVER SEAT CONTROL UNIT : Special Repair
Requirement ........................................................ ...
48
AUTOMATIC DRIVE POSITIONER CONTROL
UNIT ....................................................................... ...
48
AUTOMATIC DRIVE POSITIONER CONTROL
UNIT : Diagnosis Procedure ............................... ...
48
AUTOMATIC DRIVE POSITIONER CONTROL
UNIT : Special Repair Re quirement .......................
48
SLIDING SWITCH ..............................................50
Description ........................................................... ...50
Component Function Check .................................50
Diagnosis Procedure .............................................50
Component Inspection ............................................51
RECLINING SWITCH ........................................53
Description ........................................................... ...53
Component Function Check .................................53
Diagnosis Procedure .............................................53
Component Inspection ............................................54
LIFTING SWITCH (FRONT) ..............................56
Description ........................................................... ...56
Component Function Check .................................56
Diagnosis Procedure .............................................56
Component Inspection ......................................... ...57
LIFTING SWITCH (REAR) ................................59
Description ........................................................... ...59
Component Function Check ..................................59
Diagnosis Procedure ..............................................59
Component Inspection ............................................60
TILT SWITCH ....................................................62
Description ........................................................... ...62
Component Function Check ..................................62
Diagnosis Procedure ..............................................62
Component Inspection ............................................63
PEDAL ADJUSTING SWITCH ..........................65
Description ........................................................... ...65
Component Function Check ..................................65
Diagnosis Procedure ..............................................65
Component Inspection ............................................67
SEAT MEMORY SWITCH .................................68
Description ..............................................................68
Component Function Check ..................................68
Diagnosis Procedure ..............................................68
Component Inspection ............................................69
DOOR MIRROR REMOTE CONTROL
SWITCH .............................................................
70
CHANGEOVER SWITCH ....................................... ...70
CHANGEOVER SWITCH : Description ..................70
CHANGEOVER SWITCH : Component Function
Check ......................................................................
70
CHANGEOVER SWITCH : Diagnosis Procedure ...70
CHANGEOVER SWITCH : Component Inspec-
tion ..........................................................................
72
MIRROR SWITCH .................................................. ...72
MIRROR SWITCH : Description .............................72
MIRROR SWITCH : Component Function Check ...72
MIRROR SWITCH : Diagnosis Procedure ..............72
MIRROR SWITCH : Component Inspection ...........74
POWER SEAT SWITCH GROUND CIRCUIT ...76
Diagnosis Procedure ..............................................76
DETENTION SWITCH .......................................77
Description ........................................................... ...77
Component Function Check ..................................77
Diagnosis Procedure ..............................................77
FRONT DOOR SWITCH (DRIVER SIDE) .........79
Description ........................................................... ...79
Component Function Check ...................................79
Diagnosis Procedure ...............................................79
Component Inspection ............................................80
SLIDING SENSOR ............................................81
Description ..............................................................81
Component Function Check ..................................81
Diagnosis Procedure ..............................................81
Revision: April 20092010 QX56

ADP-3
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
RECLINING SENSOR .................................... ....83
Description .......................................................... ....83
Component Function Check ..................................83
Diagnosis Procedure ..............................................83
LIFTING SENSOR (FRONT) ..............................85
Description .......................................................... ....85
Component Function Check ..................................85
Diagnosis Procedure ..............................................85
LIFTING SENSOR (REAR) ................................87
Description .......................................................... ....87
Component Function Check ..................................87
Diagnosis Procedure ..............................................87
TILT SENSOR ....................................................89
Description ..............................................................89
Component Function Check ..................................89
Diagnosis Procedure ..............................................89
PEDAL ADJUSTING SENSOR ..........................91
Description .......................................................... ....91
Component Function Check ..................................91
Diagnosis Procedure ..............................................91
MIRROR SENSOR .............................................93
DRIVER SIDE ........................................................ ....93
DRIVER SIDE : Description ....................................93
DRIVER SIDE : Component Function Check ........93
DRIVER SIDE : Diagnosis Procedure ....................93
PASSENGER SIDE ...................................................95
PASSENGER SIDE : Description ....................... ....95
PASSENGER SIDE :
Component Function Check ..................................
95
PASSENGER SIDE : Diagnosis Procedure ...........95
SLIDING MOTOR ...............................................97
Description ..............................................................97
Component Function Check ..................................97
Diagnosis Procedure ..............................................97
RECLINING MOTOR ..........................................99
Description .......................................................... ....99
Component Function Check ..................................99
Diagnosis Procedure ..............................................99
LIFTING MOTOR (FRONT) ..............................101
Description .......................................................... ..101
Component Function Check ................................101
Diagnosis Procedure ............................................101
LIFTING MOTOR (REAR) ................................103
Description .......................................................... ..103
Component Function Check ................................103
Diagnosis Procedure ............................................103
TILT MOTOR ....................................................105
Description .......................................................... ..105
Component Function Check ................................105
Diagnosis Procedure ............................................105
PEDAL ADJUSTING MOTOR ........................107
Description ........................................................... ..107
Component Function Check ................................107
Diagnosis Procedure ............................................107
DOOR MIRROR MOTOR ................................109
Description .............................................................109
Component Function Check ..................................109
Diagnosis Procedure .............................................109
Component Inspection ...........................................111
SEAT MEMORY INDICATOR LAMP ..............112
Description .............................................................112
Component Function Check ................................112
Diagnosis Procedure ............................................112
Component Inspection ...........................................113
ECU DIAGNOSIS .......................................114
DRIVER SEAT CONTROL UNIT ....................114
Reference Value .................................................. ..114
Wiring Diagram ......................................................119
Fail Safe ................................................................133
DTC Index .............................................................134
AUTOMATIC DRIVE POSITIONER CON-
TROL UNIT ......................................................
135
Reference Value ....................................................135
Wiring Diagram ......................................................138
BCM (BODY CONTROL MODULE) ...............153
Reference Value ....................................................153
Terminal Layout .....................................................156
Physical Values ................................................... ..156
Wiring Diagram ......................................................162
Fail Safe ................................................................166
DTC Inspection Priority Chart .............................167
DTC Index .............................................................167
SYMPTOM DIAGNOSIS ............................169
ADP SYSTEM SYMPTOMS ............................169
Symptom Table ................................................... ..169
NORMAL OPERATING CONDITION .............171
Description .............................................................171
PRECAUTION ............................................172
PRECAUTIONS ...............................................172
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ..
172
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect .................................
172
Precaution for Work ...............................................173
ON-VEHICLE REPAIR ...............................174
DRIVER SEAT CONTROL UNIT ....................174
Removal and Installation ..................................... ..174
Revision: April 20092010 QX56

ADP-4
AUTOMATIC DRIVE POSITIONER CON-
TROL UNIT ......................................................
175
Removal and Installation ..................................... ..175
SEAT MEMORY SWITCH ...............................176
Removal and Installation ..................................... ..176
DOOR MIRROR REMOTE CONTROL
SWITCH ............................................................
177
Removal and Installation .......................................177
PEDAL ADJUSTING MOTOR ........................ ..178
Removal and Installation .......................................178
TILT SWITCH ................................................. ..179
Removal and Installation .......................................179
Revision: April 20092010 QX56

DIAGNOSIS AND REPAIR WORKFLOWADP-5
< BASIC INSPECTION >
C
DE
F
G H
I
K L
M A
B
ADP
N
O P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work FlowINFOID:0000000005147421
WORK FLOW
DETAILED FLOW
ALKIA0538GB
Revision: April 20092010 QX56

ADP-6
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurred).
>> GO TO 2
2. CHECK DTC WITH AUTOMATIC DRIVE POSITIONER SYSTEM
Check “Self Diagnostic Result” with CONSULT-III.
Refer to ADP-134, "
DTCIndex".
Is any symptom described and any DTC is displayed?
Symptom is described, DTC is displayed.>>GO TO 3
Symptom is not described, DTC is displayed.>>GO TO 7
Symptom is described, DTC is not displayed.>>GO TO 4
3. CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 7
4. CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 5
5. CHECK NORMAL OPERATING CONDITION
Check normal operating condition. Refer to ADP-171, "
Description".
Is the incident normal operation?
YES >> Inspection End.
NO >> GO TO 6
6. PERFORM BASIC INSPECTION
Isolate the malfunctioning point with the basic inspection. Refer to ADP-8, "
Preliminary Check".
>> GO TO 8
7. PERFORM DTC CONFIRMATION PROCEDURE
Perform the confirmation procedure for the detected DTC.
Is the DTC displayed?
YES >> GO TO 9
NO >> Check intermittent incident. Refer to GI-38, "
Intermittent Incident".
8. PERFORM COMPONENT FUNCTION CHECK
Perform the component function check for the isolated malfunctioning point.
>> GO TO 9
9. DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Isolate the malfunctioning point by performing the di agnosis procedure relevant to the symptom during the
component diagnosis.
>> GO TO 10
10. REPAIR OR REPLACE
Repair or replace the malfunctioning part.
Revision: April 20092010 QX56