torque ISUZU TF SERIES 2004 Workshop Manual
Page 558 of 4264
10-50 CAB
8. Body Side Rear Upper Trim Cover
Pry the trim cover clips free from the body panel.
Important Operations - Installation
7. Tongue Side Seat Belt
Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)
6. Rear End Trim Cover
Insert the hooks on the back upper portion of trim cove
r
to the body panel.
Page 561 of 4264
CAB 10-53
1) Pull out the adjuster knob.
RTW3A0SH000301
2) Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
11. Center Pillar Upper Trim Cover
Pry the trim cover clips free from the body panel.
13. Body Side Rear Upper Trim Cover
Pry the trim cover clips free from the body panel.
Important Operations - Installation
12. Rear Tongue Side Seat Belt
Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)
Page 562 of 4264
10-54 CAB
10. Front Tongue Side Seat Belt
Tighten the seat belt upper anchor bolt to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1/30)
7. Rear End Trim Cover
Insert the hooks on the back upper portion of trim cove
r
to the body panel.
Page 580 of 4264
10-72 CAB
Important Operations - Removal
1. Front Cover
While pushing the cover downward, pull it.
4. Seat Assembly
Disconnect the seat belt warning harness connecto
r
(Driver’s side only).
5. Side Seat Belt Buckle/Pretensioner Seat Belt/Center
Seat Belt
Remove the seat belt fixing screw and the warning
harness connector clip (Bucket seat model).
RTW4A0SH000101-X
Remove the pretensioner seat belt fixing screw and the
warning harness connector (With pretensioner seat bel
t
model).
24.jpg
Remove the seat belt fixing screws and the warning
harness connector clip (Bench seat model).
Important Operations – Installation
5. Buckle Side Seat Belt/Pretensioner Seat Belt/Center
Seat Belt
Tighten the seat belt fixing screws to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
Page 581 of 4264
CAB 10-73
3. Bolt: Seat Assembly to Floor Panel
The fixing procedure of a bolt
(1) Front inboard
(2) Front outboard
(3) Rear inboard
(4) Rear inboard
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
Page 582 of 4264
10-74 CAB
REAR SEAT (CREW CAB)
REMOVAL AND INSTALLATION
RTW3A0SF000101
Removal Steps
1. Nut
2. Rear seat assembly
Installation Steps
2. Rear seat assembly
1. Nut
Important Operation - Removal
1. Nut Pull the strap to release the seat back lock and fold
down the seat back.
Important Operation - Installation
1. Nut
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
Page 583 of 4264
CAB 10-75
JUMP SEAT (EXTEND CAB)
REMOVAL AND INSTALLATION
RTW3A0MF001201
Removal Steps
1. Cover
2. Bolt
3. Jump seat assembly
4. Storage box
Installation Steps
4. Storage box
3. Jump seat assembly
2. Bolt
1. Cover
Important Operation - Installation
2. Bolt
Bolt Torque N
m (kg
m/lb
ft)
40 (4.1 / 30)
Page 585 of 4264
CAB 10-77
Important Operations - Removal
3. Knob
Pull out the knob.
RTW3A0SH000301
4. Upper anchor bolt
Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
Important Operations - Installation
7. Adjustable shoulder anchor fixing bolts
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
5. Retractor fixing bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
4. Upper anchor bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
2. Lower anchor bolt
Bolt torque Nm (kgfm/lbft)
40 (4.1 / 30)
Page 587 of 4264
CAB 10-79
Important Operations - Removal
1. Front Seat Assembly
Refer to Front Seat in this section.
2. Side Seat Belt Buckle/Pretensioner Seat Belt/Center
Seat Belt
Remove the seat belt fixing screw and the warning
harness connector clip (Bucket seat model).
RTW4A0SH000101-X
Remove the pretensioner seat belt fixing screw and the
warning harness connector (With pretensioner seat bel
t
model).
24.jpg
Remove the seat belt fixing screws and the warning
harness connector clip (Bench seat model).
Important Operations - Installation
2. Side Seat Belt Buckle/Pretensioner Seat Belt /Center
Seat Belt
Tighten the seat belt fixing screws to the specified
torque.
Torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
1. Front Seat Assembly
Tighten the seat assembly fixing bolts to the specified
torque.
Torque Nm (kgfm/lbft)
40 (4.1 / 30)
Page 589 of 4264
CAB 10-81
Important Operations - Removal
3. Knob
Pull out the knob.
RTW3A0SH000301
4. Upper anchor bolt
Open the through ring anchor cover and remove the
seat belt upper anchor bolt.
Important Operations - Installation
7. Adjustable shoulder anchor fixing bolts
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
5. Retractor fixing bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
4. Upper anchor bolt
Bolt torque N
m (kgf
m/lb
ft)
40 (4.1 / 30)
2. Lower anchor bolt
Bolt torque Nm (kgfm/lbft)
40 (4.1 / 30)