100-01 JAGUAR X308 1998 2.G Workshop Manual

Rear
Suspension - Rear Wheel Bearing
Re
moval and Installation
S

pecial Tool(s)

Hub Holdin

g Tool
204-195 (JD227)

Hub Pu
ller
204-011 (JD 1D)

R
ear-Hub Remover
204-113 (JD 132)

Bearing Cu
p Replacer Adaptor
204-118 (JD 550-4/1)

Bearing Cu
p Replacer Adaptor
204-118 (JD 550-4/2)

D
river Handle
100-013 (18G-134)

Rear-hub spacer
replacer
204-003 (JD 15)
O
il Seal Remover/Replacer

Rear Su
spension - Wh
eel Knuckle Bushing
Remo
val and Installation
Remov
a
l
S
p
ecial Tool(s)

Hub Holdin
g Tool
2
04-195 (JD227)

Hub Pu
ller

204-011 (JD 1D)

D rive
r Handle
100-013 (18G-134)

Bearing Cu p Replacer Adaptor
2
04-120 (JD 550-6)
1. CAUTION: Replacement of nuts and bolts: Various
thread-locking devices are used on nuts and bolts throughout the
vehicle. These devices restrict the number of times a nut or bolt
can be used. See section 100-00 for information.
Release parking brake.
2. Ra
ise the vehicle on a four-post lift.

3. Fully slacken bu
t do not remove parking brake cable adjuster
nut.
4. Release appropriate side parkin g brake cable from connecting

I
nstallation

29
.
Secure hub carrier in a vise.

30
.
Remove and discard bear ings from hub carrier.

31
.
Remove bearing cup from hub carrier.
Posit
ion hub carrier on a piece of wood.
Position a lo

ng tapered drif
t in housing bore recess.
Remove bearin
g cup.
32. Repeat procedure to remove opposite end bearing cup and
discard both cups.
33. Remove hub carrier from vise.
34. Thoroughly clean all components.

1. Using a h
ydraulic press, install
new bearing cups in hub carrier.

1
. Position hub carri
er on press-bed.
2. Using special tool 100-013 and adapter 204-120, align bearing cup to hub carrier.
Al
ign assembly to ram, and
operate press to fully seat
bearing cup.
Repeat
procedure to fi
t other bearing cup.
2. Secure hub carri er in a vise.