JAGUAR XFR 2010 1.G Workshop Manual

8. CAUTION: Do not use the 5mm hole on the
differential case flange for the alignment mark.


NOTE: Using the 3mm hole on the differential case
flange, paint an alignment mark (as indicated) to aid
correct installation of the driveshaft to the differential case.


















9. CAUTION: To avoid damage to the joint or gaiter, do
not allow the driveshaft to hang.


NOTE: Make sure that the special tool is correctly
installed to the recess on the driveshaft.
Special Tool(s): 205-932

10.























11. CAUTION: To avoid damage to the joint or gaiter, do
not allow the driveshaft to hang.


NOTE: Using a suitable hammer and drift, make sure
that you only hit the corner edges of the special tool to
remove the driveshaft.
Special Tool(s): 205-932 www.JagDocs.com

Installation

1. CAUTION: Only tighten the bolts finger-tight at this
stage.























2. NOTE: Make sure that the alignment mark on the
driveshaft is correctly aligned to the alignment mark on the
differential case.

Torque: 75 Nm

3. NOTES:


This step only applies if a new driveshaft is being
installed.


Using the 3mm hole on the differential case flange
and paint alignment mark on the driveshaft (as indicated).
Make sure that the alignment marks are correctly aligned.
Torque: 75 Nm













4. NOTE: Make sure that you re-align the driveshaft to
the transmission flange using the alignment mark.























5. CAUTION: Under no circumstances must the flexible
coupling (or it's fixings) be loosened or removed from the
driveshaft.

Torque: 127 Nm

7. Torque: 5 Nm 8. Torque: 7 Nm



















9. Refer to: Exhaust System (309-00C Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).

Cables, General Procedures).

Differential fluid - vehicles without supercharger Castrol SAF XO (75W 90) Differential fluid - vehicles with supercharger Castrol BOT 720 (75W 90) Initial Specifications
Item Specification Differential fluid capacity - vehicles without supercharger 0.9 Liters Differential fluid capacity - vehicles with supercharger 1.3 Liters Service Specifications
Item Specification Differential fluid capacity - vehicles without supercharger 0.85 Liters Differential fluid capacity - vehicles with supercharger 1.25 Liters Torque Specifications
Description Nm lb-ft lb-in Differential case front retaining bolt 90 66 - Differential case rear retaining bolts 192 142 - Differential filler plug 27 20 - Differential drain plug 27 20 - Halfshaft constant velocity joint nut 300 221 - Driveshaft retaining bolts 73 54 - www.JagDocs.com

1
Electronic
differential 2
Differential
Locking
Module
(DLM) Published:11-May-2011
RearDriveAxle/Differential-RearDriveAxleandDifferential-Component
Location
Descriptionand Operation

3.0L V6 diesel engines - 2.73:1.