sensor Lancia Delta 2015 Owner handbook (in English)

18KNOWING YOUR CAR
Doors not closed correctly (red)
The warning light s witches on when one or
more doors are not completel y s hut. An acous tic
s ignal is activated with the doors open and the
car moving. The warning light in the multifunction di s-
play also switches on when the bonnet and/or tailgate are
not properly s hut. The dis play will s how the dedicated
message.
´
General failure indication (amber)
Fuel cut-off activated
This warning light (or symbol on the display)
s witches on when the fuel cut-off system inter-
venes . The dis play shows the dedicated message.
Eng ine oil pressure sensor failure
This warning light (or symbol on the dis play) switches on
when a fault is detected in the engine oil pre ssure sens or.
The dis play shows the dedicated message.
Dusk sensor failure
This warning light (or symbol on the dis play) switches on
when a fault is detected in the dus k sens or.
S peed limit exceeded
This warning light (amber), or symbol (red) on the dis-
play , switches on when the pr
eset speed limit i s exceeded
(for Arab countries the speed limit is s et at 120 km/h).
The dis play shows the dedicated message.
Rain sensor failure
(for vers ions/markets where provided)
This warning light (or symbol on the dis play) switches on
when a fault is detected in the rain s ensor. The dis play
s hows the dedicated message.
è
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 18

KNOWING YOUR CAR19
1
Parking sensor fault
( for vers ions/markets , where provided)
This warning light (or symbol on the display ) switches on
when a fault is detected in the parking sens ors. The dis -
play shows the dedicated message.
T yre pressure monitorin g s ystem failure
(for vers ions/markets , where provided)
This warning light (or symbol on the display) switches on
when a failure i s detected in the TPMS (for versions/ mar-
kets , where provided).
S hould one or more wheel s without a s ensor be fitted, the
ins trument panel warning light will come on and stay on
until the initial condition s are res tor
ed. The dis play s hows
the dedicated message.
NOTE If one of the failures listed above occurs , contact
a Lancia Dealer ship as soon as possible.
AFS failure
This warning light (or symbol on the display ) switches on
when a fault i s detected in the AFS (see “Headlight s” para-
graph in this chapter). The di splay s hows the dedicated
message.
S teering corrector not available
This warning light (or symbol on the display ) switches on
when the s teering corrector i s not available. The di splay
will show the dedicated me ssage. DPF (diesel particulate filter) cleanin
g in
prog ress (only versions with DPF) (amber)
When the key i s turned to MAR, the warning
light switches on but it s hould switch off after a
few seconds . The warning light turn s on cons tantly when
the DPF system needs to eliminate the trapped pollutant s
(particulate) thr

ough the regeneration proce ss.
The warning light doe s not come on ever y time the DPF
i s being regenerated, rather onl y when the driving condi-
tions are s uch that the driver need s to know it. To switch
the warning light off, the car mu st be kept moving until
the regeneration proce ss is completed.
On average, the process las ts 15 minutes . The best con-
ditions to complete the regeneration proce ss are reached
driving the car at about 60 km/h with engine speed over
2000 rpm. When this warning light switches on, it does
not indicate a car failure and thu s it s hould not be taken
to a works hop. A dedicated message will appear on the
dis play when the warning light s witches on (for ver-
s ions /markets , wher

e provided).
h
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 19

KNOWING YOUR CAR31
1
IMPORTANT Setting is possible between 30 and 200
km/h, or 20 and 125 mph, according to the previou sly s et
unit. See the “Meas urement unit adjus tment (Measure-
ment unit)” paragraph de scribed below. The s etting will
increas e/decreas e by five units each time
Õ/Ôis pressed.
Hold down button
Õ/Ôto increas e/decrease the setting
rapidly . Complete the adjus tment with single presses of
the button when y ou approach the de sired value.
– briefly press the S ET button to go back to the menu
s creen or hold the button down to go back to the standard
s creen without s aving.
To cancel the s etting, proceed as follows:
– press the S ET button briefly to make the display flash
(On);
– press the
Ôbutton to make the di splay flash (Off);
– press the SET button briefl y to return to the menu s creen
or press the button for longer to return to the standard
s creen without memori sing. Headlig
ht sensor (automatic/dusk sensor
headlig hts sensitivity adjustment)
(for vers ions/markets , where provided)
This function is used to adjus t the dusk sens or sens itivi-
t y to three levels (level 1 = minimum, level 2 = medium,
level 3 = maximum); the higher the sens itivity , the lower
the amount of external light needed to switch the head-
lights on.
Proceed as follows to set:
– pre ss the S ET button briefly to make the display flash
the previous ly s et level;
– p

re ss
Õor Ôto make y our choice;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out saving.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 31

68KNOWING YOUR CAR
Activation
When the ring nut is turned to the AUTO pos ition the
external lights automatically s witch on depending on the
exterior brightne ss.
The headlight s can only be flashed with the s ensor on.
Deactivation
When the lights are switched off by the sensor, the dipped
beam headlight s and s ide lights are switched off and the
day lights are switched on (if activated).
The sens or is not capable of detecting the pre sence of fog
therefore, in thes e circumstances, the lights have to be
turned on manuall y.
FRONT FOG LIGHT S WITH
C ORNERING LIGHTS FUNCTION
When the dipped beam headlights are on and the speed is
below 40 km/h, if the s teering wheel rotation angle is large
or the direction indicators are on, a light (incorporated
in the fog light) will come on on the relevant side to im-
pr

ove vis ibility at night time. The function can be acti-
vated/deactivated via the di splay menu (s ee “Display”
paragraph in thi s chapter).
AUTOMATIC
HEADLIGHT S ENSOR (dusk sensor)
(for vers ions/markets , where provided)
It detects variation s in brightness outs ide the vehicle de-
pending on the light setting: the greater the sens itivity , the
less outs ide light needed to activate the exterior light s be-
ing turned on. The sens itivity of the dus k sens or may be
adjus ted, us ing the “S etup menu” on the ins trument pan-
el.
The daytime running lights are an alterna-
tive to the dipped beam headlights for driving
during the daytime in countries where it is
compulsory to have lights on during the day, and
they are also permitted in those countries where this
is not obligatory.
Daytime running lights cannot replace dipped beam
headlights when driving at night or through tunnels.
The use of daytime running lights is governed by
the highway code of the country in which you are
driving. Comply with the prescriptions.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 68

72KNOWING YOUR CAR
The rear window wiper stops operating a few strokes af-
ter releas ing the stalk; a further “cleaning stroke”, after
a few s econds, completes the wiping operation.
RAIN SENS OR
(for vers ions/markets where provided)
The rain s ensor A - fig. 35 i s located behind the internal
rear view mirror in contact with the wind screen and au-
tomatically adjusts the frequenc y of the winds creen wiper
s trokes according to the rain intens ity during intermittent
operation.
The sens or has an adjus tment range that varie s progres -
s ively from wiper s till (no stroke) when the wind screen
i s dry , to wiper at firs t continuous s peed (s low continu-
ou s operation) with inten se rain.
fig. 35L0E0023m
Activation
Move the right lever down b y one click.
The activation of the sens or is s ignalled by a “stroke” to
s how that the command ha s been acquired.
IMPORTANT Keep the gla ss in the sensor area clean.
B y turning ring nut F - fig. 34 it i s possible to increas e the
s ens itivity of the rain sens or to obtain a more rapid vari-
ation between wiper s till (no stroke) when the winds creen
i s dry , to wiper at firs t continuous s peed (s low continu-
ous operation).
The increas ing of the rain sens or sens itivity is s ignalled b y
a “s troke” to s how that the command ha s been acquired.
Activating the winds creen washers with the rain s ensor
activated pr

oduce s the normal was hing cycle at the end of
which the rain s ensor res umes its normal automatic op-
eration.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 72

KNOWING YOUR CAR73
1
Deactivation
Turn the ignition key to S TOP.
The next time the vehicle i s s tarted (ignition ke y turned
to MAR), the sens or is not reactivated even if the lever i s
still in po sition B - fig. 34. To activate the sensor, move
the lever to pos ition A or C and then back to po sition B.
Rain sens or activation will be indicated b y at lea st one
wiper “s troke” even if the winds creen is dry.CRUISE CONTROL
(constant speed regulator)
(for vers ions/markets , where provided)
This is an electronicall y controlled driving a ssistance de-
vice which allow s the vehicle to be driven at a cho sen speed
above 30 km/h on long stretches of dry, straight roads with
few variations (e.g. motorwa ys), without having to depre ss
the accelerator pedal.
It i s therefore not recommended to u se this device on ex-
tra-urban roads with traffic. Do not u se it in town.
A CTIVATING THE DEVIC E
Turn selector wheel A - fig. 36 to ON.
The device mus t only be switched on in gears higher
than 4th.
Do not activate the rain sensor when wash-
ing the car in an automatic car wash.
Make sure the device is switched off if there
is ice on the windscreen.
Make sure the device is switched off whenev-
er the windscreen is being cleaned.
fig. 36L0E0022m
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 73

128KNOWING YOUR CAR
The TPMS cannot indicate sudden tyre pres-
sure drops (for example when a tyre blows
out). In this case stop the car, braking with
care and avoiding sharp steering actions.
Replacing the normal tyres with winter tyres
and vice versa requires the inspection of the
TPMS, which should only be carried out by
a Lancia Dealership.
The TPMS requires the use of specific equip-
ment. Contact a Lancia Dealership to find out
which accessories are compatible with the
system (wheels, hub caps etc.). The use of other ac-
cessories may affect the normal operation of the sys-
tem.
Tyre inflation pressure may vary according
to outdoor temperature. The TPMS may tem-
porarily indicate insufficient pressure. In this
case, check the tyre pressures with the tyres cold
and, if necessary, restore the inflation values.
The tyre repair kit (Fix&Go Automatic) pro-
vided with the car is compatible with the
TPMS sensors; using sealants not equiva-
lent with that in the original kit may adversely af-
fect its operation. If sealants not equivalent with
the original one are used, it is recommended to
have the TPMS sensors checked by a qualified re-
pair centre.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 128

KNOWING YOUR CAR129
1If the vehicle is equipped with the TPMS,
when a tyre is removed, it is advisable to re-
place the rubber gasket for the valve. Contact
a Lancia Dealership.
If the vehicle is equipped with the TPMS, tyre
and/or rim fitting/removal operations require
specific precautions. To avoid damaging the
sensors or fitting them incorrectly, tyre and/or rims
fitting/removal operations should be carried out on-
ly by specialists. Contact a Lancia Dealership.
Particularly strong radiofrequency interfer-
ence may cause the TPMS to operate incor-
rectly. This condition is indicated to the dri-
ver by the
nwarning light or symbol lighting up on
the display together with a dedicated message.
The message will disappear automatically as soon
as the interference ceases to disturb the system.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 129

130KNOWING YOUR CAR
Contact a
Lancia Dealer ship.
Repair the damaged wheel
Contact a
Lancia Dealer ship.
–
Contact a
Lancia Dealer ship.
––
NO
NO
YES
YES
YESYES
YES
YES NO
NO
NO
(*) Given as an alternative in the Owner Handbook and available at Lineacce ssori Lancia.
(**) Not cross- swapped (ty res mus t stay on the s ame side).
In order to u se the system properly , refer to the following table when you have to change wheel s/ty res:
Operation Sensor Sig nal fault Service Operation
Lancia Dealership
–
Replacing a wheel with the
spare wheel
Replacing the wheel s
with winter ty res
Replacing the wheel s
with winter ty res
Replacing the wheel s
with others of a different s ize (*)
S wapping wheel s
(front/rear) (**)
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 130

KNOWING YOUR CAR131
1
PARKING SENSORS
(for versions/markets where provided)
The parking s ensors are located in the rear bumper fig. 77
and their function i s to inform the driver, through an in-
termittent acous tic signal, of the pres ence of obstacles be-
hind the car.
A CTIVATION/DEAC TIVATION
The sens ors are automatically activated when revers e gear
i s engaged. A s the obs tacle behind the car gets closer, the
acous tic signal become s more frequent.
fig. 77L0E0059m
A COUS TIC SIGNAL
When revers e gear is engaged and there is an obstacle
behind the car an acou stic signal is activated and the sig-
nal varies as the dis tance of the ob stacle from the bumper
varies .
The frequency of the acoustic signal:
❍ increas es a s the dis tance between the car and the ob-
s tacle decreas es;
❍ becomes continuous when the dis tance between the car
and the ob stacle is less than around 30 cm and stops
immediately if the distance increas es;
❍ is cons tant if the dis tance is unchanged.
Detection distances
Centre operating radiu s 140 cm
S ide operating radiu s 60 cm
If several obs tacles ar

e detected by the sensors, only the
neares t one is considered.
001-154 Delta GB 1ed 03/03/14 10.00 Pagina 131