LAND ROVER FRELANDER 2 2006 Repair Manual

Remove t he A/C compress or, upper s upport bracket.22.
Remove t he A/C compress or, l ower support bracket.23.
Us ing s uit able t ools , rel eas e t he acces s ory drive beltt ens i on.24.

Releas e t he A/C compress or and posi ti on as ide.25.
Di sconnect t he transmis si on electrical connect or.26.
Releas e t he 3 ground cables .27.

Di sconnect t he engi ne wiring harnes s .
28.
Remove t he engi ne wiring harnes s .
29.
Installation
Inst all t he engi ne wiring harnes s .
1.
Connect t he engi ne wiring harnes s .
T orque: 10 Nm 2.
At tach t he ground cabl es.
T orque: 10 Nm 3.
Connect t he transmis s ion electrical connect or.
4.
Inst all t he A/C compress or.
T orque: 25 Nm 5.
Inst all t he acces sory dri ve bel t.
6.
Inst all t he A/C compress or, l ower support bracket.
T orque: 25 Nm 7.
Inst all t he A/C compress or, upper s upport bracket.
T orque: M10 45 Nm M8
25 Nm M6
10 Nm 8.
Connect t he oil level s ens or electrical connect or.
9.
At tach t he cat alys t monit or s ens or wiri ng harnes s.
10.
Connect t he s tarter mot or el ect ri cal connector.
11.

T orque:
10 Nm Connect t he CKP s ens or electrical connect or.
12.
Connect t he generator electrical connect or.
T orque: 10 Nm 13.
Connect t he KS electrical connect ors .
14.
Connect and s ecure t he ECT s ens or electrical connect or.
15.
Connect t he fuel inject or el ect ri cal connect ors .
16.
Connect t he coi l-on-plug el ect ri cal connectors.
17.
Di sconnect t he variable cams haft t iming s olenoids .
18.
Connect t he HO2S electrical connect ors .
19.
Connect t he ECM elect rical connectors .
20.
Inst all t he engi ne mount.
Refer t o: Engi ne Mount RH (303-01A Engi ne - I6 3.2L Petrol,
Removal and Ins tall ati on).
21.
Inst all t he int ake mani fol d.
Refer t o: Int ake Mani fol d (303-01A Engi ne - I6 3.2L Petrol, Removal
and Inst all at ion).
22.
Inst all t he air int ake plenum.
Refer t o: Plenum Chamber (412-01 Cl imat e Control, Removal and
Inst all at ion).
23.
Inst all t he bat t ery t ray.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,
Removal and Ins tall ati on).
24.
Connect t he batt ery ground cable and ins tall t he cover.
Refer t o: Specificati ons (414-00 Bat tery and Charging Sys tem -
General Informat ion, Specificati ons).
25.

Publi s hed: 11-May-2011
Wiring Harnesses - Engine Wiring HarnessTD4 2.2L Diesel
Removal and Inst all ati on
Removal
• NOTE: Make s ure t he wi ri ng harness is rout ed correct ly. All vehicles
Remove t he air cleaner hous ing.
Refer t o: Air Cleaner (303-12B Intake Ai r Dis tribut ion and Fil tering -
TD4 2.2L Dies el, Removal and Inst all ati on).
1.
Remove t he fuel fi lt er.
Refer t o: Fuel Fil ter (310-01B Fuel Tank and Lines - TD4 2.2L Dies el ,
Removal and Ins tall ati on).
2.
Remove t he engi ne compartment clos ing panel.
Refer t o: Secondary Bulkhead Cent er Panel - TD4 2.2L Dies el (501-02 Front End Body Panel s, Removal and Ins tal lati on).
3.
Remove t he bat t ery carrier.
Refer t o: Bat t ery Tray (414-01 Bat tery, Mount ing and Cables ,
Removal and Ins tall ati on).
4.
Remove t he engi ne undershi eld.
Refer t o: Engi ne Unders hi eld (501-02 Front End Body Panel s ,
Removal and Ins tall ati on).
5.
Remove t he front RH s plas h s hi eld.
Refer t o: Fender Spl ash Shi eld (501-02 Front End Body Panel s ,
Removal and Ins tall ati on).
6.
7. W ARNING: Make sure t o s upport the vehicle wit h axle
s tands .
Rais e and s upport t he vehi cl e.
7.
All vehicles

T orque:
10 Nm 8.
9.

10.
11.
12.

13.
14.
15.

16.
17.
Vehicles with manual transmission 18.
Vehicles with automatic transm ission

19.
All vehicles T orque:
6 Nm 20.
21.
22.