display Lexus CT200h 2014 Owner's Manual (in English)

Page 417 of 622

4176-1. Using the air conditioning system and defogger
CT200h_OM_OM76135E_(EE)
6
Interior features
Automatic air conditioning system (Vehicles without
a navigation system or Lexus Display Audio System)
■Adjusting the temperature setting
Press to increase the temperature and to decrease the tem-
perature.
■Adjusting the fan speed setting
Press to increase the fan speed and to decrease the fan
speed.
Press the “OFF” button to turn the fan off.
Air outlets and fan speed are automatically adjusted according to the temper-
ature setting.
The illustrations below are for left-hand drive vehicles.
The button positions and shapes will di ffer for right-hand drive vehicles.
Control panel
CT200h_OM_OM76135E_(EE).book Page 417 Friday, May 30, 2014 1 1:14 AM

Page 437 of 622

4376-4. Using the other interior features
CT200h_OM_OM76135E_(EE)
6
Interior features
XVehicles with a navigation system
Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
XVehicles without navigation system
The clock can be adjusted by pressing the buttons.
Adjusts the hours
Adjusts the minutes
Rounds to the nearest hour
*
*
:e.g. 1:00 to 1:29 →1:00
1:30 to 1:59 →2:00
The clock is displayed when the power switch is in ACCESSORY or ON mode.
Please use a power supply for electronic goods that use less than 12 VDC /10 A
(power consumption of 120 W).
When using electronic goods, make sure that the power consumption of all the
connected power outlets is less than 120 W.
XCenter console
Press down and release the lid.
Clock
1
2
3
Power outlet
1
CT200h_OM_OM76135E_(EE).book Page 437 Friday, May 30, 2014 1 1:14 AM

Page 462 of 622

4627-3. Do-it-yourself maintenance
CT200h_OM_OM76135E_(EE)
If any washer does not work or the
warning message appears on the multi-
information display, the washer tank
may be empty. Add washer fluid.
Washer fluid
WA R N I N G
■When adding washer fluid
Do not add washer fluid when the hybrid system is hot or operating as washer fluid
contains alcohol and may catch fire if spilled on the engine etc.
NOTICE
■Do not use any fluid other than washer fluid
Do not use soapy water or engine antifreeze instead of washer fluid.
Doing so may cause streaking on the vehicle’s painted surfaces.
■Diluting washer fluid
Dilute washer fluid with water as necessary.
Refer to the freezing temperatures listed on the label of the washer fluid bottle.
CT200h_OM_OM76135E_(EE).book Page 462 Friday, May 30, 2014 1 1:14 AM

Page 471 of 622

4717-3. Do-it-yourself maintenance
CT200h_OM_OM76135E_(EE)
7
Maintenance and care
■Low profile tires (vehicles with 17 inch tires)
Generally, low profile tires will wear more rapidly and tire grip performance will be
reduced on snowy and/or icy roads when compared to standard tires. Be sure to use
snow tires or tire chains on snowy and/or icy roads and drive carefully at a speed appro-
priate for road and weather conditions.
■If the tread on snow tires wears down below 4 mm (0.16 in.)
The effectiveness of the tire s as snow tires is lost.
■Situations in which the tire pressure warning system may not operate properly (if
equipped)
●In the following cases, the tire pressure warning system may not operate properly.
• If non-genuine Lexus wheels are used.
• A tire has been replaced with a tire that is not an OE (Original Equipment) tire.
• A tire has been replaced with a tire that is not of the specified size.
• Tire chains etc. are equipped.
• Lock nuts are equipped.
• An auxiliary-supported run-flat tire is equipped.
• If a window tint that affects the radio wave signals is installed.
• If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel
housings.
• If the tire inflation pressure is extremely higher than the specified level.
• If wheel without the tire pressure warning valve and transmitter is used.
• If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer.
●Performance may be affected in the following situations.
• Near a TV tower, electric power plant, gas station, radio station, large display, air-
port or other facility that generates strong radio waves or electrical noise
• When carrying a portable radio, cellular phone, cordless phone or other wireless communication device
●When the vehicle is parked, the time taken for the warning to start or go off could be
extended.
●When tire inflation pressure declines rapidly for example when a tire has burst, the
warning may not function.
■The initialization operation (vehicles with the tire pressure warning system)
●Make sure to carry out initialization afte r adjusting the tire inflation pressure.
Also, make sure the tires are cold before carry ing out initialization or tire inflation pres-
sure adjustment.
●If you have accidentally turned the power switch off during initialization, it is not neces-
sary to press the reset switch again as init ialization will restart automatically when the
power switch has been turned to ON mode for the next time.
●If you accidentally press the reset switch wh en initialization is not necessary, adjust the
tire inflation pressure to the specified leve l when the tires are cold, and conduct initial-
ization again.
CT200h_OM_OM76135E_(EE).book Page 471 Friday, May 30, 2014 1 1:14 AM

Page 507 of 622

507
8When trouble arises
CT200h_OM_OM76135E_(EE)
8-1. Essential informationEmergency flashers ................. 508
If your vehicle has to be stopped in an
emergency.................................509
8-2. Steps to take in an emergency If your vehicle needs to be towed ............................................ 510
If you think something is wrong .............................................514
If a warning light turns on or a warning buzzer
sounds........................................... 515
If a warning message is displayed.......................................521
If you have a flat tire (vehicles with a spare tire) ...................... 539
If you have a flat tire (vehicles without a spare tire) ................ 551
If the hybrid system will not start ............................................... 563
If the electronic key does not operate properly .....................565
If the 12-volt battery is discharged ................................. 567
If your vehicle overheats ........... 571
If the vehicle becomes stuck ............................................. 575
CT200h_OM_OM76135E_(EE).book Page 507 Friday, May 30, 2014 1 1:14 AM

Page 510 of 622

5108-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
If your vehicle needs to be towed
In the following situations, it is not possible to be towed by another vehicle using
cables or chains, as the front wheels m ay be locked due to the parking lock. Con-
tact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional or commercial towing service.
●There is a malfunction in the shift control system. ( →P. 577)
●There is a malfunction in the immobilizer system. ( →P. 7 9 )
●There is a malfunction in the smart entry & start system. ( →P. 565)
●The 12-volt battery is discharged. ( →P. 5 6 7 )
The following may indicate a problem with your hybrid transmission. Contact any
authorized Lexus dealer or repairer, or another duly qualified and equipped pro-
fessional or commercial towing service before towing.
●The hybrid warning message shows on the multi-information display and the
vehicle does not move.
●The vehicle makes an abnormal sound.
Do not tow with a sling-type truck to
prevent body damage.
If towing is necessary, we recommend having your vehicle towed by any
authorized Lexus dealer or repairer, or another duly qualified and equipped
professional or commercial towing servic e, using a lift-type truck or flat bed
truck.
Use a safety chain system for all towing, and abide by all state/provincial and
local laws.
Situations when it is not possible to be towed by another vehicle
Situations needs to contact dealers before towing
Towing with a sling-type truck
CT200h_OM_OM76135E_(EE).book Page 510 Friday, May 30, 2014 1 1:14 AM

Page 521 of 622

5218-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
8
When trouble arises
If a warning message is displayed
Master warning light
The master warning light also comes on or flashes in order to indicate that a message
is currently being displayed on the multi-information display.
Multi-information display
If any of the warning lights come on again after the following actions have been
performed, contact any authorized Lexu s dealer or repairer, or another duly
qualified and equipped professional.
If a warning is shown on the multi-information display, stay calm and perform
the following actions:
XVehicles with monochrome displayXVehicles with color display
1
2
CT200h_OM_OM76135E_(EE).book Page 521 Friday, May 30, 2014 1 1:14 AM

Page 527 of 622

5278-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
8
When trouble arises
Indicates a malfunction in the shift control system A buzzer also sounds.
→ Have the vehicle inspected at any authorized Lexus
dealer or repairer, or another duly qualified and
equipped professional immediately.
• The hybrid system may not be able to start.
• The parking lock mechanism may not operate. Also, shifting the shift position to P may not be possible.
When parking, choose a level place and apply the
parking brake securely.
• The automatically P position selection function ( →P. 1 8 6 )
may not operate. Before turning the power switch off,
securely press the P position switch, and be sure to check
that the shift position is in P by verifying the shift position
indicator or P position switch indicator.
• The power switch may not be able to be turned off. In this case, the power switch can be turned off by apply-
ing the parking brake.
• The 12-volt battery may not be charged sufficiently. In this case, charge or replace the 12-volt battery.
After charging the 12-volt battery, the message may
continue to be displayed until the shift position is
shifted from P.
Indicates a malfunction in the shift control systemA buzzer also sounds.
→ Have the vehicle inspected at any authorized Lexus
dealer or repairer, or another duly qualified and
equipped professional immediately.
If not inspected, vehicle systems may not operate
properly.
Wa r n i n g m e s s a g eDetails/Actions
CT200h_OM_OM76135E_(EE).book Page 527 Friday, May 30, 2014 1 1:14 AM

Page 532 of 622

5328-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
(If equipped)
Indicates a malfunction in the pre-crash safety systemA buzzer also sounds.
→ Have the vehicle inspected by any authorized Lexus
dealer or repairer, or another duly qualified and
equipped professional.
Indicates that the power switch is turned off or turned to
ACCESSORY mode and the driver’s door is opened
while the lights are turned on
A buzzer also sounds.
→ Turn the lights off.
(If equipped)
Indicates that the moon roof is not fully closed (with the
power switch off, and the driver’s door open)
A buzzer also sounds.
→ Close the moon roof.
Indicates that the hybrid system has overheated
This message may be displayed when driving under
severe operating conditions. (For example, when driv-
ing up a long steep hill.)
A buzzer also sounds.
→ Stop and check. ( →P. 5 7 1 )
Wa r n i n g m e s s a g eDetails/Actions
(Flashes)
(Flashes)
(Flashes)
CT200h_OM_OM76135E_(EE).book Page 532 Friday, May 30, 2014 1 1:14 AM

Page 534 of 622

5348-2. Steps to take in an emergency
CT200h_OM_OM76135E_(EE)
*: For the EV drive mode operating conditions: →P. 1 8 1
■Warning messages
The warning message illustrations used are intended as examples, and may differ from
the image that is actually displaye d on the multi-information display.
■Warning message in radar cruise mode (if equipped)
In the following situations, the warning messag e may not be displayed even if vehicle-to-
vehicle distance decreases:
●When your vehicle and the vehicle ahead are traveling at the same speed or the vehicle
ahead is traveling more quickly than your vehicle
●When the vehicle ahead is traveling at a very low speed
●Immediately after cruise control speed is set
●At the instant the accelerator pedal is depressed
■Warning buzzer
→ P. 5 1 9
Indicates that the EV drive mode has been automatically
canceled
*
The reason the EV drive mode is not available (the
battery charge is low, speed is higher than the EV
drive mode operating speed range, accelerator pedal
is depressed too much) may be displayed.
A buzzer also sounds.
→ Drive the vehicle for a while.
Wa r n i n g m e s s a g eDetails/Actions
(Flashes 3 times)
CT200h_OM_OM76135E_(EE).book Page 534 Friday, May 30, 2014 1 1:14 AM

Page:   < prev 1-10 ... 141-150 151-160 161-170 171-180 181-190 191-200 201-210 next >