navigation system Lexus ES300h 2014 Navigation Manual

91
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
: Select to hide the freeway guidance
screen.
z Select “Intersection” , or press the “MAP/
VOICE” button on the Remote Touch, to
change back to the freeway guidance
screen.
: Select to hide th e intersection guid-
ance screen.
z Select “Intersection” , or press the “MAP/
VOICE” button on the Remote Touch, to
change back to the intersection guidance
screen.
WHEN APPROACHING A
FREEWAY EXIT OR
JUNCTION
When the vehicle approaches an exit or
junction, the freeway guidance screen
will be displayed.
No.Function
Next street name
Current position
Distance from the current position to
the exit or junction
WHEN APPROACHING AN
INTERSECTION
When the vehicle approaches an inter-
section, the intersection guidance
screen will be displayed.
No.Function
Next street name
Current position
Distance to the intersection

93
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
2. TYPICAL VOICE GUIDANCE PROMPTS
As the vehicle approaches an intersec-
tion, or point, where maneuvering the
vehicle is necessary, the system’s voice
guidance will provide various messages.
No.Voice guidance
“Proceed about 5 miles to Main
street.”
“In half of a mile, right turn onto Main
street.”
“Next right.”/“Right turn ahead.”
(Beep sound only)
INFORMATION
●
The street names may not be pro-
nounced correctly or clearly due to the
text-to-speech function.
●On freeways, interstates or other high-
ways with higher speed limits, the voice
guidance will be made at earlier points
than on city streets in order to allow time
to maneuver the vehicle.
0.5 miles
5 miles
No.Voice guidance
“Proceed about 4 miles to the traffic
circle.”
“In half of a mile, traffic circle ahead
and then the 3rd exit onto Main
street.”
“The 3rd exit ahead.”
“The exit ahead.”
(Beep sound only)
4 miles 0.5 miles

95
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
■ROUTES INCLUDING IPD ROADS
zAfter it has made a route calculation, the
system will advise the user whether IPD
roads are included in the route or not.
z The portion of the route that covers IPD
roads is indicated by light blue.
Even when on IPD roads (roads that are
not completely digi tized in our data-
base), you will be guided along the
searched route via voice guidance.
No.Voice guidance
“On the way to your destination,
there will be roads with incomplete
data.”
“In half of a mile, left turn.”
“Next left. Upcoming roads have in-
complete data. Please carefully ob-
serve the local traffic restrictions, as
they may not match the navigation
guidance.”
z IPD roads are roads that are not yet com-
pletely digitized in our database. How-
ever, their geometry, name and
administrative coding are already known.
CAUTION
●Be sure to obey the traffic regulations and
keep the road condition in mind espe-
cially when you are driving on IPD roads.
The route guidance may not have the
updated information such as the direction
of a one way street.

97
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
4. SETTING AND DELETING DESTINATIONS
1Select “Route” .
2Select “A d d ”.
3Input an additional destination in the
same way as a destination search. (See
“DESTINATION SEARCH” on page
68.)
4Select the desired “A d d D e s t i n a t i o n
Here” to insert the new destination into
the route.
1Select “Route” .
2Select “Reorder” .
3Select the desired destination and se-
lect “Move Up” or “Move Down” to
change the arrival order.
4After selecting the destinations, select
“OK” .
zThe system searches for the guidance
route again, and displays the entire route.
ADDING DESTINATIONS
Destinations can be added and routes
can be searched again.
REORDERING
DESTINATIONS
When more than 1 destination is set, the
arrival order of the destinations can be
changed.

99
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
5. SETTING ROUTE
1Select “Route” .
2Select “Detour” .
3Select a screen button to select the de-
sired detour distance. “1 mile (km)”,
“3 miles (km)” or “5 miles
(km)” : Select one of these screen buttons to
start the detour process. After detouring,
the system returns to the original guidance
route.
“Whole Route”: Select to make the system
calculate an entire new route to the destina-
tion.
“A r o u n d Tr a f f i c ” : Select to make the system
search for the route based on the traffic
congestion information received from XM
NavTraffic
®. For details, see “XM
NavTraffic®” on page 343.
DETOUR SETTING
While the route guidance is operating,
the route can be changed to detour
around a section of the route where a
delay is caused by road repairs, or an ac-
cident, etc.
INFORMATION
●
This picture shows an example of how the
system would guide around a delay
caused by a traffic jam. This position indicates the location of a
traffic jam caused by road repairs, an ac-
cident, etc.
This route indicates the detour suggest-
ed by the system.
●When the vehicle is on a freeway, the
detour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
●The system may not be able to calculate a
detour route depending on the selected
distance and surrounding road condi-
tions.

101
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
1Select “Route” .
2Select “Preferences” .
3Select “Preferred” , “Short” or “Alter-
nate” and select “OK”.
4The entire route from the starting point
to the destination is displayed.
“OK” : Select to start guidance.
1Select “Route” .
ROUTE PREFERENCE
TO SELECT ROUTE TYPE
The Preferred, Short or Alternative
route can be selected.
“Edit Route” : Select to change a route.
(See page 89.)
TO SELECT ROUTE FEATURES
A number of choices are available when
setting the conditions the system uses to
determine the route to the destination.

103
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
1Select “Route” .
2Select “Pause Guidance” .
zThe screen will return to the current posi-
tion map without route guidance.
1Select “Route” .
2Select “Resume Guidance”.
zThe map screen, with the current position
displayed, will be returned to.
PAUSING AND RESUMING
GUIDANCE
TO PAUSE GUIDANCE
INFORMATION
●
Withou t rou te guidance, “Pause Guid-
ance” cannot be used.
TO RESUME GUIDANCE

105
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
3Select the desired POI categories.
zThe selected category’s icon will appear on
the top left of the screen.
z By selecting the desired POI category and
then selecting “OK”, the selected POI
icons are displayed on the map screen.
z If the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.
z Select the desired POI categories from the
list.
• The selected category icon appears on
the top left of the screen.
• By selecting the desired POI category and then selecting “OK”, the selected
POI icons are displayed on the map
screen.
• To return to the POI category selection screen, select “More”.
1Select “Find Local POI” .
2Select the screen button of the desired
POI.
zThe selected POIs are displayed on the
map screen.
“Near...” : Select to search for POIs near the
current position or along the route.
TO DISPLAY THE LOCAL POI
LIST
Points of Interest that are within
20 miles (32 km) of the current position
will be listed from among the selected
categories.

107
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
1Select “Show on Map” .
2Select “Route Trace” .
zThe “Route Trace” indicator is highlighted.
1Select “Show on Map” .
2Select “Route Trace” .
zSelecting “Yes” stops recording and the
route trace remains displayed on the
screen.
z Selecting “No” stops recording and the
route trace is erased.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display.
INFORMATION
●
This feature is available when the map
scale is more than 30 miles (50 km).
TO START RECORDING THE
ROUTE TRACE
TO STOP RECORDING THE
ROUTE TRACE

108
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3. ADDRESS BOOK
1. NAVIGATION SETTINGS
1Press the “MENU” button on the
Remote Touch.
2Select “Setup” .
3Select “Navigation” .
4Select the desired items to be set.
zOn this screen, the following operations
can be performed:
Points or areas on the map can be regis-
tered.
The registered points can be used on the
“Destination” screen. (See “DESTINA-
TION SEARCH BY HOME” on page
69, and “DESTINATION SEARCH BY
“Address Book”” on page 81.)
Registered areas to avoid, will be avoid-
ed when the system searches for a route.
No.FunctionPage
Select to set home.109
Select to set preset destina-
tions.111
Select to set the address
book.114
Select to set areas to avoid.119
Select to delete previous
destinations.124
Select to set detailed navi-
gation settings.125