display Lexus IS250 2015 Navigation Manual

109
2. DESTINATION SEARCH
IS250/350_Navi_U
NAVIGATION SYSTEM
31Display the “Destination” screen.
(→ P. 107)
2Select “Go Home” .
zThe navigation system performs a search
for the route and the entire route map is
displayed. ( →P. 121)
1Display the “Destination” screen.
(→ P. 107)
2Select any of the preset destination but-
tons (1-5 ).
zThe navigation system performs a search
for the route and the entire route map is
displayed. ( →P. 1 2 1 )
SETTING HOME AS
DESTINATION
To use this function, it is necessary to
register a home address. ( →P. 140)
SETTING PRESET
DESTINATIONS AS
DESTINATION
To use this function, it is necessary to
register preset destinations to the preset
screen buttons (1-5). ( →P. 142)

110
2. DESTINATION SEARCH
IS250/350_Navi_U
1Display the “Destination” screen.
(→ P. 107)
2Select “Address” .
3Select the desired search method.
1Select “City”.
2Enter a city name and select “OK” .
“Last 5 Cities” : Select the city name from
the list of the last 5 cities.
3Select the desired city name.
4Enter a street name and select “OK”.
5Select the desired street name.
6Enter a house number and select “OK”.
zIf the same address exists, the address list
screen will be displayed. Select the desired
address.
SEARCHING BY ADDRESS
There are 2 methods to search for a des-
tination by address.
No.FunctionPage
Select to search by city.110
Select to search by street
address.111
SEARCHING BY CITY

111
2. DESTINATION SEARCH
IS250/350_Navi_U
NAVIGATION SYSTEM
3
1Select “Street Address” .
2Enter a house number and select “OK”.
3Enter a street name and select “OK”.
4Select the desired street name.
5Enter a city name and select “OK”.
6Select the desired city name.
zIf the same address exists, the address list
screen will be displayed. Select the desired
address.
1Display the “Destination” screen.
(→ P. 107)
2Select “Point of Interest” .
3Select the desired search method.
SEARCHING BY STREET
ADDRESS
INFORMATION
●A street name can be searched using
only the body part of its name.
Fo r example: S WESTERN AVE
• A search can be performed by entering “S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
SEARCHING BY POINT OF
INTEREST
There are 4 methods to search for a des-
tination by Points of Interest.
No.FunctionPage
Select to search by name.112
Select to search by catego-
ry.114
Select to search by phone
number.115
Select to search by eDesti-
nation.377

112
2. DESTINATION SEARCH
IS250/350_Navi_U
1Select “Name”.
2Enter a POI name and select “OK”.
3Select the desired POI.
zWhen entering the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen will be displayed.
Select the desired POI.
■ SELECTING A CITY TO SEARCH
1Select “City”.
2Enter a city name and select “OK” .
“A n y C i t y ” : Select to cancel the city setting.
3Select the desired city name.
4Select the desired POI.
■SELECTING FROM THE CATEGO-
RIES
1Select “Category” .
2Select the desired category.
zIf there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories” : Select to display all
POI categories.
3Select the desired POI.
SEARCHING BY NAME
No.FunctionPage
Select to search for POI in
the desired city.112
Select to search for POI
from the category list.112
Select to search for POI us-
ing online database.113
INFORMATION
● To search for a facility name using multi-
ple search words, put a space between
each word.

114
2. DESTINATION SEARCH
IS250/350_Navi_U
1Select “Category” .
2Select the desired search point.
3Select the desired POI category.
zIf there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories” : Select to display all
POI categories.
“Favorite POI Categories” : Select to use
the 6 POIs that have been previously
set.( →P. 153)
4Select the desired POI.
“Web Search”: Select to search for POI us-
ing online database. ( →P. 113)
SEARCHING BY CATEGORY
No.Function
Select to set the search point from
near the current position.
Select to search for POIs along the
set route.
Select to set the search point from
near a city center. ( →P. 115)
Select to set the search point from
near a destination.
INFORMATION
●The names of POIs located within
approximately 200 miles (320 km) from
the selected search point can be dis-
played.

115
2. DESTINATION SEARCH
IS250/350_Navi_U
NAVIGATION SYSTEM
3
XWhen “Near a City Center in XX*” is se-
lected
1Select “Near a City Center in XX” .
2Enter a city name and select “OK”.
“Last 5 Cities” : Select the city name from
the list of the last 5 cities.
3Select the desired city name.
4Select “OK” when the city center map
screen is displayed.
5Follow the steps from 3 onward in
“SEARCHING BY CATEGORY”.
( → P. 114)
*: XX represents the selected search area
name.
1Select “Phone #” .
2Enter a phone number and select “OK”.
zIf there is more than 1 site with the same
number, the list screen will be displayed.
INFORMATION
● If the navigation system has never been
used, selecting the city name from “Last 5
Cities” will not be available.
SEARCHING BY PHONE
NUMBER
INFORMATION
●If there is no match for the entered phone
number, a list of identical numbers with
different area codes will be displayed.

116
2. DESTINATION SEARCH
IS250/350_Navi_U
1Display the “Destination” screen.
(→ P. 107)
2Select “Previous Destinations” .
3Select the desired destination.
“Previous Start Point” : Select to display the
start point map of the previous guided
route.
“Delete” : Select to delete the previous des-
tination. ( →P. 150)
DESTINATION SEARCH BY
DESTINATION ASSIST
The destination can be searched by call-
ing an operator of Destination Assist.
You can request either a specific busi-
ness, address, or ask for help locating
your desired destination. ( →P. 374)
SEARCHING FROM
PREVIOUS DESTINATIONS
INFORMATION
●The previous start point and up to 100
previously set destinations are displayed
on the screen.

117
2. DESTINATION SEARCH
IS250/350_Navi_U
NAVIGATION SYSTEM
31Display the “Destination” screen.
(→ P. 107)
2Select “A d d r e s s B o o k ” .
3Select the desired address book entry.
“Options” : Select to register or edit address
book entries. ( →P. 145)
1Display the “Destination” screen.
(→ P. 107)
2Select “Emergency”.
3Select the desired emergency category.
4Select the desired destination.
SEARCHING BY ADDRESS
BOOK
To use this function, it is necessary to
register an address book entry.
(→ P. 144)
SEARCHING BY
EMERGENCY
INFORMATION
●The navigation system does not guide in
areas where route guidance is unavail-
able. ( →P. 1 6 1 )

118
2. DESTINATION SEARCH
IS250/350_Navi_U
1Display the “Destination” screen.
(→ P. 107)
2Select “Intersection & Freeway” .
3Select the desired method.
1Select “Intersection” .
2Enter the name of the first intersecting
street which is located near the destina-
tion and select “OK”.
3Select the desired street name.
4Enter the name of the second intersect-
ing street and select “OK”.
5Select the desired street name.
zIf the 2 streets cross at more than 1 inter-
section in a city, the list of intersections will
be displayed.
SEARCHING BY
INTERSECTION AND
FREEWAY
There are 2 methods to search for a des-
tination by Intersection & Freeway.
No.FunctionPage
Select to search by inter-
section.118
Select to search by freeway
entrance/exit.119
SEARCHING BY
INTERSECTION

119
2. DESTINATION SEARCH
IS250/350_Navi_U
NAVIGATION SYSTEM
3
1Select “Freeway Entrance / Exit” .
2Enter a freeway name and select “OK”.
3Select the desired freeway.
4Select “Entrance” or “Exit”.
5Enter a freeway entrance or exit name
and select “OK”.
6Select the desired entrance or exit
name.
1Display the “Destination” screen.
(→ P. 107)
2Select “Map”.
3Scroll the map to the desired point and
select “Go to ” .
“A d j u s t L o c a t i o n ” : Select to adjust the posi-
tion in smaller increments. ( →P. 92)
zIf a destination has already been set, “Go to
” and “Add to Route” will be displayed.
“Go to ”: Select to delete the existing des-
tination(s) and set a new one.
“Add to Route” : Select to add a destination.
zThe navigation system performs a search
for the route and the entire route map is
displayed. ( →P. 1 2 1 )
SEARCHING BY FREEWAY
ENTRANCE/EXIT
INFORMATION
●Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I-405). US
highways use the state designation before
the number (CA-118).
SEARCHING BY MAP
By selecting “Map” the last displayed lo-
cation is displayed again on the map
screen. You can search for a destination
from this map.