navigation lexus LC500 2018 Navigation Manual

101
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
3-4.Favourite destinations
1Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Check that the favourites list is dis-
played.
 The 4 top favourites (home, work,
and any 2 favourites) are displayed
as quick access buttons.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Add new...” box.
4 Select the desired method to
search the desired location.
5 Enter the entry name and then
select “OK”.
6 Check that the entry is registered in
the favourites list.
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance. Automatic naviga-
tion is available to the 4 favourite desti-
nations.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
Registering an entry
Favourite points and routes on the
map can be registered in the favou-
rites list. Up to 200 entries can be
registered.
Displaying favourites list
Creating a new entry
Registering a quick access desti-
nations

103
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
5Select “Yes” when the confirmation
screen appears.
6 Check that a progress bar is being
displayed while the data loading is
in progress.
 To cancel this function, select “Can-
cel”.
 A confirmation screen is displayed
when the operation is complete.
7 Check that the entry is registered in
the favourites list.
The POIs and routes that are regis-
tered on your Lexus portal site can be
downloaded via the internet. They will
be stored in the favourites list.
For detailed information about down-
loading POIs and routes: P.222
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites” or “Recent”.
3 Select of the desired entry.
4 Select the desired item.
Entries in the favourites list (Desti-
nation)
Select to display detailed entry
information. ( P.104)
Select to change the entry
name/address.
Select to delete the entry.
Downloading POIs and routes
via the internet
Editing the entry information
Editing the entr y information
A
B
C

105
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
6Select the desired item.

106
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
3-5.Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select the desired item to be set.
 “Map layout”
Select to change the map layout to 3D
heading-up, 2D heading-up or 2D north-
up. ( P.107)
“Day/Night mode”
Select to change the map screen bright-
ness. ( P.107)
“Arrival information”
Select to change the display of arrival
information to estimated arrival time or
remaining travel time.
 “Speed limits”
Select to set speed limit information on/off.
(If equipped) ( P.108)
“Automatic map zoom”
Select to change the zoom level that is
automatically zoomed into when an area
requiring caution is approached. ( P.109)
“POIs on map”
Select to set displayed POI icon catego-
ries. ( P.109)
“Show guidance arrow”
Select to set the display of route guidance
arrow on/off. ( P.93)
“Show street name”
Select to set the display of the name of the
current street or the next street on/off.
( P.93)
“Show 3D buildings”
Select to set the display of 3D buildings
on/off. ( P.71)
“Show 3D landmarks”
Select to set the display of 3D landmarks
on/off. ( P.72)
“Show signposts”
Select to set the display of signposts on/off.
( P.93)
“Show junction view”
Select to set the display of the junction view
on/off. ( P.94)
“Show lane recommendation”
Select to set the recommended lane dis-
Map settings
Displaying map setting screen
Map setting screen

107
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
play on/off. (P.94)
“Show traffic bar”
Select to set the display of traffic bar on/off.
( P.93)
“Show traffic icons”
Select to set the display of the traffic mes-
sage icons on/off. ( P.76)
“Show speed cameras”
Select to set the display of the safety cam-
eras icons on/off. ( P.72)
“Use online data for speed cam-
eras”
Select to enable using online data to show
the safety camera icons.
 “Save recent route”
Select to display a trail of breadcrumbs on
the map.
 “Show highway mode”
Select to set the display of the highway
mode on/off. ( P.93)
“Country information”
This function goes to another screen
where it is possible to:
• Set country information screen when
crossing the border on/off.
• See country information for any country
in the database.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Map layout”.
6 Select the desired item.
Select to display the map screen in
3D heading-up.
Select to display the map screen in
2D heading-up.
Select to display the map screen in
2D north-up.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Day/Night mode”.
6 Select the desired item.
Select to change the map screen to
Map layout
Day/Night mode
A
B
C
A

108
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
day or night mode depending on
the position of the headlight switch.
Select to always display the map
screen in day mode.
Select to always display the map
screen in night mode.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Arrival information”.
6 Select the desired item.
Select to set the arrival information
off.
Select to display the arrival time on
the map screen.
Select to display the remaining time
on the map screen.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select the desired item.
Select to display the speed limits on
the map.
Select to receive an audible warn-
ing, if the speed limit will be
exceeded by a certain range.
Select to set the speed warning
threshold. ( P.108)
*:If equipped
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select “Speed warning threshold”.
Arrival information
Speed limits*
B
C
A
B
C
Speed warning threshold
A
B
C

109
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
7Select the desired item.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Automatic map zoom”.
6 Select the desired item.
Select to set the automatic zoom
off.
Select to set the near distance to
automatic map zoom.
Select to set the normal distance to
automatic map zoom.
Select to set the far distance to
automatic map zoom.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “POIs on map”.
6 Select the desired POI categories.
Select to display all categories.
Select to hide all icons.
Select to display main categories
and subcategories.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Country information”.
Automatic map zoom
A
B
C
D
POIs on map
Country information
A
B
C

110
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
6Select the desired item.
Select to display the country infor-
mation when the vehicle crosses a
border on/off.
Select to display the country infor-
mation.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select the item to be set.
Select to change the receiving
method for traffic messages.
( P.111)
Select to change settings for traffic
over internet. ( P.111)
Select to set the TMC (Traffic mes-
sage channel) setup.
Select to set the radius for display-
ing traffic messages. ( P.112)
A
B
Traffic message settings
Displaying traffic settings screen
A
B
C
D

111
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
Select to set the dynamic reroute
method. ( P.112)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select “Traffic messages”.
6 Select the desired item.
Select to receive traffic messages
via the internet.
Select to receive traffic messages
via the TMC (Traffic message chan-
nel).
Select to not receive the traffic
messages.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select “Traffic via internet settings”.
6 Select the desired item.
Select to set the refresh frequen-
cies for the traffic messages via the
internet.
Select to change the receiving
method for traffic messages when
the car is outside of its home coun-
try.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select “Radio traffic settings”.
Receiving method for traffic mes-
sages
Receiving setting for traffic mes-
sages via internet
E
A
B
C
Receiving settings for traffic mes-
sages via TMC
A
B

112
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
6Select the desired item.
Select to change the receiving set-
tings of FM radio to automatic or
manual.
Radio station Allows the user to
manually select the preferred TMC
station from a list of available sta-
tions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select “Traffic message radius”.
6 Select desired radius.
 This setting is for route calculation.
Only traffic messages within the
radius are taken into account during
calculation.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select “Dynamic reroute”.
6 Select the desired item.
Select to turn off the rerouting
when traffic messages on the guid-
ance route are received.
Select to reroute automatically. The
route automatically changes when
traffic messages on the guidance
route are received.
Select to reroute manually. When
traffic messages on the guidance
route are received, select manually
whether or not to change routes.
Setting radius filter
A
B
Setting dynamic reroute method
A
B
C