lexus LC500 2018 Navigation Manual

61
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Vehicle” on the sub menu.
4 Select the items to be set.
Select to set vehicle customization.
*1
Select to set Lexus parking assist-
sensor. *1,2
Select to set driving mode. *1,2
Select to set valet mode. ( P.61)
*1: Refer to the “OWNER’S MANUAL”
*2: If equipped
The security system can be set to on by
entering a security code (4-digit num-
ber).
When set to on, the system will
become inoperative once the electri-
cal power source is disconnected until
the security code is entered.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Vehicle” on the sub menu.
4 Select “Valet mode”.
5 Enter the 4-digit personal code and
select “OK”.
6 Enter the same 4-digit personal
code again and select “OK”.
 The system will request that you
input the security code again to
confirm that you remember it cor-
rectly.
7 When valet mode activates, the
system stops and a security code
(4-digit number) standby screen is
displayed.
●If the 4-digit personal code is forgotten, please contact any Lexus retailer or
Lexus authorized repairer, or any reliable
Vehicle settings
Settings are available for vehicle
customization, Lexus parking
assist-sensor, etc.
Displaying the vehicle settings
screen
Vehicle settings screen
A
B
Setting the valet mode
C
D

62
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
repairer.
1 Enter the 4-digit personal code and
select OK.
●If an incorrect security code (4-digit
number) is entered 6 times, the system will not accept another security code (4-digit number) for 10 minutes.
If the valet mode has been acti-
vated

3
63
-$@-$I@/BWJ@0.&@ &&

3
Navigation system
Navigation system
3-1. Basic operation
Quick reference ............................ 64
Map screen operation ............... 69
Map screen information.............. 71
Traffic messages ............................ 76
3-2. Destination search
Search operation .......................... 79
3-3. Route guidance
Starting route guidance............. 90
Route guidance............................. 93
Editing route................................... 95
3-4. Favourite destinations
Registering an entry................... 101
Editing the entry information. 103
3-5. Setup
Map settings................................. 106
Traffic message settings ........... 110
Route preferences settings..... 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
.......................................................... 115
Navigation database updates 117
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

64
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
3-1.Basic operation
Destination menu screen is displayed by following operation:
 Press the “MAP” button on the Remote Touch
 Press the “MENU” button on the Remote Touch and then select “Destination”
on the menu screen.
 Select on the map screen.
A short while later after the above methods, the display automatically switches to
normal map screen.
Select to search for a destination by contact, favourite, recent destination,
street address, and POI. ( P.79)
Select to set a destination from favourites. The top 4 favourite destinations
(home, work, and 2 favourites) are disp layed as quick access buttons. Any
favourite in the list can be used to start route guidance directly. ( P.83)
Select to search for a destination from a list of the last destinations. ( P.83)
Select to display the other search me thod (Address, POI, phonebook of con-
nected Bluetooth® device and geo-coodinates).
Quick reference
Destination menu screen
A
B
C
D

65
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
A short while later after the following methods, the display automatically switches
to map screen:
 Press the “MAP” button on the Remote Touch.
 Press the “MENU” button on the Remote Touch, then select “Destination” on
the “Menu” screen.
■After calculating a route to a new destination
Select to zoom in/out the map scale. ( P.70)
Displays the distance to the next turn with the arrow indicating the turn direc-
tion. When the arrow icon is selected, the last navigation announcement will be
repeated.
Displays information about the destination, such as estimated arrival time,
remaining travel time, distance, and traffic prediction information.
• Each time this area is selected, the inform ation will change between the arrival time and
remaining travel time to the destination.
Displays traffic events on the route.
• The remaining length and the re maining delay time are displayed.
Displays the name of the current street or the next street.
Map screen
A
B
C
D
E

66
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Select to display the action menu screen. (P.66)
Select to mute/unmute the voice guidance. ( P.94)
Select to change the map layout. ( P.71)
Select to display the destination menu screen. ( P.64)
■Except for route guidance operation
Select to zoom in/out the map scale. ( P.70)
Select to display the destination menu screen. ( P.64)
Select to change the map layout. ( P.71)
Select to display the action menu screen. ( P.66)
To display the action menu screen, display the normal map screen ( P.65) and
than select .
Action menu screen
F
G
H
I
A
B
C
D

67
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
■During route guidance operation
Select to pause or resume route guidance.
Select to display the traffic messages. It displays a list of traffic messages relat-
ing to the set route, all traffic messages, and warnings. ( P.76)
Select to display fuel station information. The location and fuel price can also be
checked. ( P.227)
Select to display parking lot information. The location, price and available
spaces of parking lots can be checked. ( P.226)
Select to display the route information screen. Route options for the route cal-
culations can be selected. ( P.95)
A
B
C
D
E

68
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
■Except for route guidance operation
Select to display the traffic messages. ( P.76)
Select to display fuel station information. The location and fuel price can also be
checked. ( P.227)
Select to display parking lot information. The location, price and available
spaces of parking lots can be checked. ( P.226)
Select to display the current position information screen.
A
B
C
D

69
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
1Press the “MAP” button on the
Remote Touch.
2 Select “Continue”.
 After about a few seconds, the cau-
tion screen automatically switches
to the map screen.
When starting the navigation system,
the current position is displayed first.
This screen displays the current vehicle
position and a map of the surrounding
area.
1 A short while later after the select-
ing “MAP” button on the Remote
Touch, the display automatically
switches to map screen.
 The current vehicle position mark
appears in the centre of the map
screen.
●While driving, the current vehicle posi- tion mark is fixed on the screen and the map moves.
●The current position is automatically set as the vehicle receives signals from the
GPS (Global Positioning System). If the current position is not correct, it is auto-matically corrected after the vehicle
receives signals from the GPS.
●After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives
signals from the GPS, the correct current position is displayed.
Use the scroll feature to move the
desired point to the center of the
screen for looking at a point on the
map screen that is different from the
current position.
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
 After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
Map screen operation
Displaying map screen
Current vehicle position display
Screen scroll operation

70
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
2Press the button on the Remote
Touch.
 Press the touch pad to return to the
current position.
3 Select the desired entry.
Select to register in favourites list.
To change the icon, name, etc.:
( P.103)
Select to set as a destination.
( P.90)
Select to display the Street View.
( P.224)
1 Select on the map.
2 Select “+” or “-” to change the scale
of the map screen.
The scale of the map screen can also be changed on the touchpad of the Remote Touch with your finger.
Pinch out on the touchpad to zoom in and pinch in to zoom out. ( P.30)
●The scale of the map screen can also be changed the following ways:
• Dragging the scale bar marking to the desired point.
●Each time “Automatic map zoom” is selected, the automatic map zoom is turned on/off.
The default automatic zoom level can be selected. ( P.109)
●The scale range is from 10 m to 1000 km (10 yd. to 600 miles).
●After the scale has been changed, the new scale indicator will be displayed for a while.
A
B
C
Map scale