lexus LC500 2018 Navigation Manual

21
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
The information screen can be
reached by the following methods:
1 Press the “MENU” button on the
Remote Touch.
2 Select “Info”.
Select to display the energy moni-
tor or fuel consumption screen.*
*: Refer to the “OWNER’S MANUAL”
Information screen
Information screen
A

22
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation
1-2.Navigation operation
1Press the “MAP” button on the
Remote Touch.
2 A short while later, the display auto-
matically switches to map screen.
■Displaying the map screen
The following operations can also be
performed.
 Changing the map direction
( P.71)
 Displaying 3D map (P.71)
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
 After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
 Press the “MAP” button on the
Remote Touch to return to the cur-
rent position.
 For detailed operation about mov-
ing the map screen: P.69
■Zooming in the map
1 Select on the map.
2 Select “+” or pinch out on the
touchpad of the Remote Touch.
( P.70)
Operating the map screen
Displaying the current position
of the vehicle on the map screen
Moving the map screen
Zooming in /out the map

23
1
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation
Quick guide
■Zooming out the map
1 Select on the map.
2 Select “-” or pinch in on the
touchpad of the Remote Touch.
( P.70) 1 Press the “MAP” button on the
Remote Touch.
2 There are different kinds of meth-
ods to search for a destination.
( P.79)
3 Select “Go”.
 Check that the entire route map is
displayed. ( P.90)
4 Select “Destination”.
Guidance to the destination is dis-
played on the screen and can be heard
via voice guidance.
Guiding the route
Setting the destination

24
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation
When route guidance is no longer
necessary, such as when you know the
rest of the route to your destination, the
destination can be deleted.
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.65)
2 Select the on the map.
3 Select “Route”
4 Select “Delete”.
 When more than 1 destination has
been set, the “Stopover list” will be
displayed on the screen. Select the
item(s) to be deleted. ( P.95)
5 Select “Yes” when the confirmation
screen appears.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Home”.
4 Select “Yes”.
5 There are different kinds of meth-
ods to search for your home.
( P.79)
6 Select “Enter”.
 Registration of home is complete.
• Editing the name, address and route
 P.103
• Setting home as the destination P.25
Deleting destinationsRegistering home
Registering home

25
1
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation
Quick guide1Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Home”.
 Selecting routes other than the one
recommended ( P.90)
 Guidance to the destination is dis-
played on the screen and can be
heard via voice guidance.
Setting home as the destination

26
-$@-$I@/BWJ@0.&@ &&

1-2. Navigation operation

2
27
-$@-$I@/BWJ@0.&@ &&

2
Basic function
Basic function
2-1. Basic information before opera-
tion
Initial screen ................................... 28
How to use the Remote Touch 28
Operating the screen................... 31
Using side display ........................ 33
Entering letters and numbers/list
screen operation ....................... 35
Linking multi-information display
and navigation system ............. 38
2-2. Network settings
Registering/Connecting
Bluetooth® device ................... 39
Setting Bluetooth® details ........ 43
Connecting to internet via Wi-Fi®
............................................................. 51
2-3. Other settings
General settings ........................... 56
Voice settings ................................ 60
Vehicle settings............................... 61
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

28
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
 When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch switch> is turned to ACCESSORY
or IGNITION ON mode mode>, the initial screen will be dis-
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running operating>, always apply the parking brake for safety.
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch is in ACCES-
SORY or IGNITION ON mode
.
Touchpad operation

29
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. ( P.56)
 Press the “MENU” button on the
Remote Touch to display the menu
screen. ( P.16)
 The map screen can be displayed by
pressing the “MAP” button on the
Remote Touch. ( P.69)
 When is displayed on the
screen, select or press the
button on the Remote Touch
to return to the previous screen.
●Perform touchpad operations using a fin- ger. Do not use nails or other objects like
pens, etc.
●Perform pointer movement operations
using only one finger. The pointer can not be operated by using more than one fin-ger.
●When water or othe r foreign materials are on the touchpad, a malfunction may
occur. In those cases, wipe off the water or foreign materials and wait about 30 seconds before operating the touchpad.
●In the following cases, there is a possibility that the touchpad may not react nor-
mally: • When wearing gloves, etc.• When operated with a wet hand.
• When a film, paint-like substance, etc., is on the touchpad.• Near a TV tower, electrical power plant,
gas station, large display, airport or other facility that generate s strong radio waves or electrical noise.
• When wireless devices, such as portable radios and mobile phones are nearby.• When the following metal items are
placed on the touchpad: Coins
Keys Metal parts of a wallet or purseA card in which aluminum foil, etc., is
attached A box of cigarettes that uses aluminum foil
Disposable hand warmers Media such as CD/DVDs, USB cables, etc.
• When the temperature is -20°C (-4°F) or less
●If a hand or object was placed on the touchpad when the engine switch is in ACCESSORY or IGNI-
TION ON mode , the touchpad may not react normally. In those cases, remove what was set on the
touchpad and operate it after waiting about 30 seconds. If there still no reac-tion, turn off the engine switch switch> and then turn it to ACCESSORY or IGNITION ON mode again.
●Clean the touchpad frequently, as the reaction of the touch operation may
worsen if the touchpad is dirty. In order to prevent malfunctions when cleaning the touchpad, turn the engine switch switch> off.
Operations are performed by touching
the touchpad with your finger.
NOTICE
●Do not allow the Remote Touch to
come into contact with food, liquid, stickers or lit cigarettes as doing so may cause damage.
●Do not subject the Remote Touch to
excessive pressure or strong impact as doing so may cause damage.
●Do not push the touchpad with a strong force or use a sharp pointed
object to operate the pad, as it is possi- ble to cause damage.
Touchpad gestures

30
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
●Setting for the touchpad, such as move-
ment speed of the pointer, can be
changed. (P.56)
Trace the pad surface while maintain-
ing contact with the touchpad.
 Moving the cursor and the pointer.
Tap the touchpad twice, quickly.
 Selecting the button on the screen.
Quick and long movement along the
touchpad with your finger.
 Moving the list screen or map
screen.
●The behavior of the flick operation differs
depending on whether the vehicle is in
motion or parked.
Slide fingers toward each other or
apart on the touchpad.
Changing the scale of the map.
Trace
Double tap
Flick
Pinch in/Pinch out